+7 (812) 309 34 73. Договоримся!
HPE DL580 Gen10 6130 2P 64GB 8SFF CN Sever comes standard with two Intel Xeon-Gold 6130 (2.1GHz/16-core/120W) processors, supporting up to four processors; comes standard with 64 GB DDR4-2666 MT/s (2 ×32 GB) memory, up to 48 memory slots; built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery; standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk; standard with seven PCI-E 3.0 slots; standard 4-port Gigabit 331FLR Ethernet card; standard with two 1600W hot-swap platinum power supply, optional support for redundancy (3+1); comes standard with 12 hot-swappable redundant fans (N+1); standard without optical drive; standard HPE iLO5; 4U rack type with easy mounting rails and cable management arm; 3 years 5* 9, NBD.
Quick Spec
Table 1 shows the quick spec.
|
Model |
869851-AA1 |
|
Description |
HPE ProLiant DL580 Gen10 6130 2.1GHz 16C 120W 2P 64G-2R P408i-p 8SFF 2x1600W Performance CN Server |
|
Processor |
Two Intel Xeon-Gold 6130 (2.1GHz/16-core/120W) processors, supporting up to four processors |
|
Memory |
Comes standard with 64 GB DDR4-2666 MT/s (2 ×32 GB) memory, up to 48 memory slots |
|
Array Controller |
Built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery |
|
Hard Disk |
Standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk |
|
PCI-E |
Seven PCI-E 3.0 slots |
|
Power Supply |
Two 1600W hot-swap platinum power supply, optional support for redundancy (3+1) |
|
Rack Type |
4U |
|
Dimensions (H x W x D) (with bezel) |
17.48cm x 44.55cm x 75.18cm (6.88 x 17.54 x 29.60 in) |
|
Weight (approximate) |
51.71 kg (114 lb) Maximum: (all hard drives, power supplies, DIMMs and processors installed) 28.12 kg (62 lb) Minimum: (one processor, one standard heatsink, one air baffle, one hard drive, two power supply, one DIMM, one NIC one rail kit with CMA and one primary riser installed) |
Product Details
Figure 1 shows the front view of DL580 Gen10 servers.
Note:
|
① |
Quick removal access panel |
|
② |
Box 1 (8 SFF, 6 SFF+2 NVMe or 8 NVMe (supports only 4 NVMe drives) SSD optional) |
|
③ |
Box 2 (8 SFF, 6 SFF+2 NVMe or 8 NVMe PCIe SSD optional) |
|
④ |
Box 3 (8 SFF, 6 SFF+2 NVMe or 8 NVMe PCIe SSD optional) |
|
⑤ |
Front USB 3.0 port |
|
⑥ |
Power On/Standby button and system power LED button |
|
⑦ |
Health LED |
|
⑧ |
NIC status |
|
⑨ |
UID button |
|
⑩ |
iLO Front Service Port |
|
⑪ |
Front USB 3.0 port |
|
⑫ |
Serial label pull tag |
|
⑬ |
Box 6 (8 SFF) |
|
⑭ |
Box 5 (8 SFF) |
|
⑮ |
Box 4 (8 SFF or Universal Media bay) |
|
⑯ |
Optional USB 2.0 (via Universal Media Bay) |
|
⑰ |
Optional 2 SFF HDD, requires optional Universal Media bay |
|
⑱ |
Optional front display port (via Universal Media Bay) |
|
⑲ |
Optional USB 2.0 (via Universal Media Bay) |
Figure 2 shows the back view of DL580 Gen10 servers.
Note:
|
① |
PCIe Slots (Slots 1-7 top to bottom), requires primary riser |
|
② |
PCIe Slots (Slots 8-14 top to bottom), requires secondary riser (includes tertiary riser) |
|
③ |
PCIe Slots (Slots 15-16 top to bottom), requires tertiary riser (included with secondary riser) |
|
④ |
Power supply Power LED (max. 4) |
|
⑤ |
Power supply Power connection (max. 4) |
|
⑥ |
HPE Flexible Slot Power Supply, 800W PS shown (max. 4) |
|
⑦ |
Serial connector |
|
⑧ |
Dedicated iLO connector |
|
⑨ |
VGA (video) connector |
|
⑩ |
USB connectors 2.0 (2) |
|
⑪ |
USB connectors 3.0 (2) |
|
⑫ |
Unit ID LED |
|
⑬ |
FlexibleLOM ports (Port 1 on right side) |
The Hard Drives
Table 2 shows the recommended hard drives.
|
Product number |
Description |
|
872475-B21 |
HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD |
|
872477-B21 |
HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD |
|
870753-B21 |
HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD |
|
872479-B21 |
HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD |
Compare to Similar Items
Table 3 shows the comparison.
|
Model |
869851-AA1 |
869852-AA1 |
|
Description |
HPE ProLiant DL580 Gen10 6130 2.1GHz 16C 120W 2P 64G-2R P408i-p 8SFF 2x1600W Performance CN Server |
HPE ProLiant DL580 Gen10 5120 2.2GHz 14C 105W 2P 32G-2R P408i-p 8SFF 2x1600W Base CN Server |
|
Processor |
Two Intel Xeon-Gold 6130 (2.1GHz/16-core/120W) processors, supporting up to four processors |
Two Intel Xeon-Gold 5120 (2.2GHz/14-core/105W) processors, supporting up to four processors |
|
Memory |
Comes standard with 64 GB DDR4-2666 MT/s (2 ×32 GB) memory, up to 48 memory slots |
Comes standard with 32 GB DDR4-2666 MT/s (2 ×16 GB) memory, up to 48 memory slots |
|
Array Controller |
Built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery |
Built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery |
|
Hard Disk |
Standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk |
Standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk |
Get More Information
Do you have any question about the 869851-AA1?
Contact us now via Live Chat or info@itg-spb.ru.
869851-AA1 Specification |
|
|
Description |
HPE ProLiant DL580 Gen10 6130 2.1GHz 16C 120W 2P 64G-2R P408i-p 8SFF 2x1600W Performance CN Server |
|
Processor |
Two Intel Xeon-Gold 6130 (2.1GHz/16-core/120W) processors, supporting up to four processors |
|
Memory |
Comes standard with 64 GB DDR4-2666 MT/s (2 ×32 GB) memory, up to 48 memory slots |
|
Array Controller |
Built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery |
|
Hard Disk |
Standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk |
|
PCI-E |
Seven PCI-E 3.0 slots |
|
Power Supply |
Two 1600W hot-swap platinum power supply, optional support for redundancy (3+1) |
|
Rack Type |
4U |
|
Dimensions (H x W x D) (with bezel) |
17.48cm x 44.55cm x 75.18cm (6.88 x 17.54 x 29.60 in) |
|
Weight (approximate) |
51.71 kg (114 lb) Maximum: (all hard drives, power supplies, DIMMs and processors installed) 28.12 kg (62 lb) Minimum: (one processor, one standard heatsink, one air baffle, one hard drive, two power supply, one DIMM, one NIC one rail kit with CMA and one primary riser installed) |
| Характеристики | |
| Array controller | Built-in HPE Smart Array P408i-p SR Gen10 12Gb SAS array controller with intelligent storage battery |
| Description | HPE ProLiant DL580 Gen10 6130 2.1GHz 16C 120W 2P 64G-2R P408i-p 8SFF 2x1600W Performance CN Server |
| Dimensions(H x W x D)(with bezel) | 17.48cm x 44.55cm x 75.18cm(6.88 x 17.54 x 29.60 in) |
| Hard Disk | Standard 8 SFF hot-plug hard disk slots, up to 48 One SFF hot-swappable hard disk, standard without hard disk |
| Memory | Comes standard with 64 GB DDR4-2666 MT/s (2 ×32 GB) memory, up to 48 memory slots |
| PCI-E | Seven PCI-E 3.0 slots |
| Power supply | Two 1600W hot-swap platinum power supply, optional support for redundancy (3+1) |
| Processor | Two Intel Xeon-Gold 6130 (2.1GHz/16-core/120W) processors, supporting up to four processors |
| Rack Type | 4U |
| Weight(approximate) | 51.71 kg (114 lb) Maximum: (all hard drives, power supplies, DIMMs and processors installed)28.12 kg (62 lb) Minimum: (one processor, one standard heatsink, one air baffle, one hard drive, two power supply, one DIMM, one NIC one rail kit with CMA and one primary riser installed) |