+7 (812) 309 34 73. Договоримся!
Общая информация (PWR-C45-2800ACV)
PWR-C45-2800ACV is a Cisco Catalyst Switch 4500 Series Switch Power Supply, delivering 2800W AC power (Data and PoE) for Cisco 4500 switches. Notice that PWR-C45-2800ACV= is similar with PWR-C45-2800ACV, except that PWR-C45-2800ACV= is a spare one.
Быстрые спецификации
Table 1.
|
Product Code |
PWR-C45-2800ACV |
|
Manufacturer |
Cisco System Inc. |
|
Product Type |
Power Supply Module |
|
Compatible product |
Cisco Catalyst 4500-E Series Switches and classic chassis |
|
Power Input |
1400W AC Power and 1400W PoE Power |
|
Auto-Sensing |
220V (16A) |
|
Rated MTBF (Hours) |
155,822 |
Детали продукта
Figure 1. PWR-C45-2800ACV can be installed in the Catalyst 4500 switch Chassis.
Compatible Products
Table 2. Recommended Compatible Switches.
|
Model |
Description |
|
WS-C4503-E |
Cat4500 E-Series 3-Slot Chassis, fan, no ps |
|
WS-C4507R-E |
Cat4500 E-Series 7-Slot Chassis, fan, no ps, Red Sup Capable |
|
WS-C4510R-E |
Cat4500 E-Series 10-Slot Chassis, fan, no ps,Red Sup Capable |
|
WS-C4507R+E |
Catalyst 4500E 7 slot chassis for 48Gbps/slot - Supervisor Engine redundancy - Power redundancy |
|
WS-C4506-E |
Catalyst 4500 E-Series 6-Slot Chassis, fan, no ps |
Сравнение с аналогом
Table 3. Comparison of similar item.
|
Product Code |
PWR-C45-2800ACV |
PWR-C45-1300ACV |
|
Manufacturer |
Cisco System Inc. |
Cisco System Inc. |
|
Product Type |
Power Supply Module |
Power Supply Module |
|
Compatible product |
Cisco Catalyst 4500-E Series Switches and classic chassis |
Cisco Catalyst 4500-E Series Switches and classic chassis |
|
Power Input |
1400W AC Power and 1400W PoE Power |
Up to 1300W AC Power and 800W PoE Power |
|
Rated MTBF (Hours) |
155,822 |
164,220 |
Что бы получить больше информации
У вас есть какие-либо вопросы о PWR-C45-2800ACV?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Branch circuit requirement | Each chassis power supply should have its own dedicated, fused-branch circuit: For North America—15 A or 20 A For International—Circuits sized to local and national codes All Catalyst 4500 E-series AC-input power supplies require single-phase source AC. All AC power supply inputs are fully isolated. – Source AC can be out of phase between multiple power supplies in the same chassis, which means that PS1 can be operating from phase A and PS2 can be operating from phase B. – For high-line operation, the power supply operates with the hot conductor wired to a source AC phase and the neutral conductor wired either to ground or to another source AC phase as long as the net input voltage is in the range of 170 to 264 VAC. – Source AC can be out of phase between AC inputs on power supplies that are equipped with multiple AC inputs, which means that power cord 1 can be plugged into phase A and power cord 2 can be plugged into phase B. |
| AC-input type | Autoranging input with power factor corrector |
| AC-input voltage | 200 to 240 VAC (±10% for full range) |
| AC-input current | 16 A maximum at 200 VAC |
| AC-input frequency | 50/60 Hz (nominal) (±3% for full range) |
| Power supply output | 113.3 A @ 12 VDC (data) 12.1 A @ 3.3 VDC (data) 28 A @ –50 VDC (PoE) |
| Power supply output capacity | 2800 W maximum 1360 W+ 40 W redundant mode (data) 2473 W maximum in combined mode (data) 1400 W maximum each in redundant mode (PoE) 2333 W maximum in combined mode (PoE) |
| Maximum kVA rating | 3.52 kVA |
| Output holdup time | 20 ms minimum |
| Max heat dissipation | 2387 BTUs/hr. |
| Minimum software requirement | Cisco IOS Release 12.1(13)EW |
| LED | Color/State Description |
| Power over Ethernet | Supported, up to 1400 W (240 Cisco phones in combined mode) |
Теги: PWR-C45-2800ACV Cisco