+7 (812) 309 34 73. Договоримся!
Общая информация (WS-X4712-SFP+E)
Cisco Catalyst WS-X4712-SFP+E line-card is designed for high-speed backbone and switch-to-switch applications. Integrated 12 SFP+ 10 GE ports12 SFP 1 GE ports with IEEE802.1AE Fiber Encryption and Cisco TrustSec capability in hardware, WS-X4712-SFP+E line-card delivers high-performance and secures user experience. This WS-X4712-SFP+E is similar with the WS-X4712-SFP+E=. The WS-X4712-SFP+E= is a spare one.
Быстрые спецификацииs
На рисунке 1 показан внешний вид WS-X4712-SFP+E.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
WS-X4712-SFP+E |
|
Line-Card Type |
Cisco Catalyst 4500 47xx E?Series Line Cards |
|
Per-Slot Bandwidth |
48 Gbps |
|
Chassis Support |
Cisco Catalyst 4507R-E and 4510R-E |
|
Supervisor Support |
·Supervisor Engine 8-E, ·Supervisor Engine 7-E, ·Supervisor Engine 7L-E |
|
per-slot capacity |
48 gigabits |
|
Max Rated Power (W) |
90 |
|
Rated MTBF (Hours) |
387,172 |
|
Modules |
·Up to 12 ports 10GE SFP+ (10GBASE-R)12 ports GE SFP (1GBASE-X) ·SFP+ and SFP can be used simultaneously on the same line card without any restrictions |
|
Cisco IOS Software |
Cisco IOS® XE Release 3.1.0SGlater |
|
hardware |
IEEE 802.1AE and Cisco TrustSec capability in hardware |
|
Service provider |
10GE/GE mix aggregation for DSLAM/PON/mobile data backhaul |
|
L2-4 Jumbo Frame support |
up to 9216 bytes |
·All power numbers shown in Table 1 are maximum values recommended for facility power and cooling capacity planning. These figures are not indicative of the actual power draw during operation. Typical power draw is about 20 percent lower than the maximum value shown.
Datasheet Download
Cisco 4500 Switch Modules Datasheet.pdf
Что бы получить больше информации
У вас есть какие-либо вопросы о WS-X4712-SFP+E?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Number of Ports | 12 |
| Port Speed | 10GBASE-R |
| Port Type | SFP+ or SFP |
| Wire Rate | 2.5-to-1 with SFP+ 1:1 with SFP |
| EtherChannel Technology | Gigabit EtherChannel: All 1000 Mbps ports 10 Gigabit EtherChannel: All 10Gbps ports IEEE 802.3ad (Link Aggregation Control Protocol): All 1000 Mbps ports Port Aggregation Protocol (PagP): Yes Number of ports per tuple: 8 EtherChannel and IEEE 802.3ad technology across line cards: Yes |
| Physical Dimensions | Occupies one slot in the Cisco Catalyst 4500 Series platform Dimensions (H x W x D): 1.2 x 14.25 x 10.75 in. (3.0 x 36.2 x 27.3 cm) |
| Safety Conditions | Fiber optic lasers: Class 1 laser products |
| Safety Certifications | UL 1950 EN 60950 CSA-C22.2 no 950 IEC 950 IEC 60950-1, 2nd Ed. EN 60950-1, 2nd Ed. UL 60950-1, 2nd Ed. CAN/CSA-C22.2 No. 60950-1 2nd Ed.11 |
| Electromagnetic Emissions Certifications | FCC 15J Class A VCCI Class A CE Marking EN 55022 Class A EN 55024 Class A CISPR 22 Class A AS/NZ 3548 NEBS Level 3 (GR-1089-CORE, GR-63-CORE) ETSI ETS-300386-2 EN 50121-4 |
| ROHS Compliance | ROHS5 |
| Max Rated Power (W) | 90 |
| Rated MTBF (Hours) | 387,172 |
| Environmental Conditions | Operating temperature: 32° to 104°F (0° to 40°C) Storage temperature: -40° to 167°F (-40° to 75°C) Relative humidity: 10 to 90%, noncondensing Operating altitude: -60 to 3000m |
| Standards | Gigabit Ethernet: IEEE 802.3z, IEEE 802.3x, IEEE 802.3ab, IEEE 803.3at, IEEE 802.3af, IEEE 802.3az 1000BASE-X (GBIC), 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, CWDM |
| Type | E-Series 10 Gigabit Ethernet Line Cards |
Теги: WS-X4712-SFP+E Cisco