+7 (812) 309 34 73. Договоримся!
Общая информация (S5720S-28P-SI-AC)
Huawei S5720S-28P-SI-AC switch is next-generation standard gigabit Layer 3 Ethernet switch based on a new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). It provides large switching capacity and high-density GE and 10 GE uplink interfaces for users. With 24 Ethernet 10/100/1,000 ports and 4 x 10 Gig SFP, the S5720S-28P-SI-AC can be used as accessaggregation switch on campus networksaccess switch in data centers. The S5720S-28P-SI-AC integrates many advanced technologies in terms of reliability, security, and energy savings to build next-generation IT networks.
Быстрые спецификацииs
На рисунке 1 показан внешний вид Huawei S5720S-28P-SI-AC switch.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
S5720S-28P-SI-AC |
|
Fixed Ports |
24 Ethernet 10/100/1,000 ports 4 x 10 Gig SFP |
|
Extended Slots |
NA |
|
Memory (RAM) |
512 MB |
|
Flash |
240 MB |
|
MAC Address Table Size Forwarding Performance |
16 MAC |
|
Forwarding Performance |
42 Mpps |
|
Switching Capacity |
336 Gbit/s |
|
Power Supply |
AC power supply, supporting RPS |
|
Voltage Required |
AC: |
|
Typical Power Consumption |
20.2W |
|
Dimensions (W x D x H) |
442 mm x 220 mm x 43.6 mm |
|
Weight |
4.75 kg |
Детали продукта
На рисунке 2 показана передняя панель Huawei S5720S-28P-SI-AC switch.
Note:
|
? |
Twenty-four 10/100/1000BASE-T ports |
? |
Four 1000BASE-X ports |
|
? |
ETH management port |
? |
One USB port |
|
? |
One console port |
|
|
*The console port is used with a console cable. The console cable is not delivered with the switch and needs to be separately purchased if needed.
На рисунке 3 показана задняя панель Huawei S5720S-28P-SI-AC switch.
Note:
|
? |
Ground screw |
? |
RPS socket |
|
? |
Jack for AC terminal locking latch |
? |
AC socket |
* The ground screw is used with a ground cable.
* RPS socket is used with an RPS cable, which is not hot swappable.
* The AC terminal locking latch is not delivered with the switch.
* AC socket is used with an AC power cable.
Recommended Modules
Table 2 shows the recommended optical modules.
|
Category |
Model |
Description |
|
GE-SFP Optical Transceiver |
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
|
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) |
|
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
|
|
SFP-1000BaseT |
Electrical Transceiver, SFP, GE, Electrical Interface Module(100m,RJ45) |
|
|
10G-SFP+ Optical Transceiver |
SFP-10G-USR |
10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC) |
|
OMXD30000 |
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm,0.3km,LC) |
|
|
OSX010000 |
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm,10km,LC) |
Compare with Similar Item
Table 3 shows the comparison of Huawei S5720-28P-SI-AC and S5720S-28P-SI-AC.
|
Models |
S5720-28P-SI-AC |
S5720S-28P-SI-AC |
|
Fixed Ports |
- 24 Ethernet 10/100/1,000 ports, 4 of which are dual-purpose 10/100/1,000SFP - 4 Gig SFP |
- 24 Ethernet 10/100/1,000 ports - 4 x 10 Gig SFP |
|
Extended Slots |
N/A |
N/A |
|
Power Supply |
Double hot swappable AC/DC power supplies, one AC/DC power module is configured by default |
AC power supply, supporting RPS |
|
Forwarding Performance |
42 Mpps |
42 Mpps |
|
Switching Capacity |
336 Gbit/s |
336 Gbit/s |
|
Power Consumption |
21.2W |
20.2W |
Comparison between LI, SI, EI and HI
Huawei S5720 Series Enterprise Switches provides LI (Lite), SI (Standard), EI (Enhanced) and HI (Hyper) models for users. There are some differences among these four versions.
Click this PDF to know more.
Comparison of Huawei S5720-LI, SI, EI and HI Series Switches.pdf
Что бы получить больше информации
У вас есть какие-либо вопросы о Huawei S5720S-28P-SI-AC switch?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Dimensions (W x D x H) | 442 mm x 220 mm x 43.6 mm |
| Multicast | PIM DM, PIM SM, PIM SSM IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics |
| Security | User privilege management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface, and VLAN Port isolation, port security, and sticky MAC Blackhole MAC address entries MAC Forced Forwarding (MFF) Limit on the number of learned MAC addresses 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist 802.1x authentication, MAC address authentication, and combined authentication on a per port basis Portal authentication on a per VLANIF interface basis MACSec |
| VLAN | 4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping |
| Input Voltage | AC: Rated voltage range: 100V to 240V, 50 Hz/60 Hz Maximum voltage range: 90V to 264V, 50 Hz/60 Hz |
| Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration Automatically loading the system software package and patches of clients One-click and automatic delivery of service configurations Supports independent running client |
| Management and Maintenance | iStack Virtual cable test SNMP v1/v2c/v3 RMON Web-based NMS System logs and alarms of different levels sFlow |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP) Supports VCMP (Similar to VTP) |
| Operating Environment | Operating temperature: Zero to 1,800m altitude: 0°C to 45°C 1,800m to 5,000m altitude: Operating temperature reduces by 1°C for every 220m increase in altitude Relative humidity: 5% to 95% (non-condensing) |
| MAC Address Table | IEEE 802.1d compliance 16K MAC address entries MAC address learning and aging Static, dynamic, and black hole MAC address entries Packet filtering based on source MAC addresses |
| IP Routing | Static route, RIPv1, RIPv2, RIPng, ECMP, OSPF, OSPFv3, BGP, BGP4+, IS-IS, IS-ISv6, VRRP, and VRRP6 |
| IPv6 Features | Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type MLD v1/v2 snooping 6to4 tunnel, ISATAP tunnel, and manually configured tunnel |
| QoS/ACL | Rate limiting on packets sent and received by an interface Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports |
| Fixed Ports | 24 x Ethernet 10/100/1,000 ports P series: 4 x Gig SFP X series: 4 x 10 Gig SFP+ |
| Extended Slot | N/A |
| Surge Protection | Surge protection capability of service ports: 6 kV |
| Typical Power Consumption | 20.2W |
| Ring Protection | RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover SEP ERPS (G.8032) STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection |
Теги: S5720S-28P-SI-AC