+7 (812) 309 34 73. Договоримся!
Общая информация (S5700-52C-SI)
Huawei S5700-52C-SI is one of the S5700 Series Switches. The S5700-SI series are gigabit Layer 3 Ethernet switches based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). It provides a large switching capacity, high-density GE interfaces, and 10 GE uplink interfaces. With extensive service features and IPv6 forwarding capabilities, the S5700-SI is applicable to various scenarios. For example, it can be used as an accessaggregation switch on campus networksan access switch in data centers. The S5700-SI integrates many advanced technologies in terms of reliability, security, and energy saving. It employs simple and convenient means of installation and maintenance to reduce customers' OAM cost and help enterprise customers build a next-generation IT network.
Быстрые спецификацииs
На рисунке 1 показан внешний вид S5700-52C-SI.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
S5700-52C-SI |
|
Fixed Interfaces |
48 Ethernet 10/100/1,000 ports |
|
Subcards supported |
4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard |
|
Extended Slots |
two extended slots, one for an uplink subcard and the other for a stack card |
|
Power Supply |
Double hot swappable AC/DC power supplies |
|
Forwarding Performance |
132 Mpps |
|
Switching Capacity |
256 Gbit/s |
|
Memory (RAM) |
256 MB |
|
Flash |
32 MB |
|
RPS |
Not supported |
|
PoE |
Not supported |
|
Maximum power consumption (100% throughput, full speed of fans) |
78 W |
|
Dimensions (W x D x H) |
442.0 mm x 420.0 mm x 43.6 mm (17.4 in. x 16.5 in. x 1.72 in.) |
|
Weight |
Empty: ≤ 5 kg (11.02 lb) Fully loaded: ≤ 8.5 kg (18.74 lb) |
Детали продукта
На рисунке 2 показана передняя панель S5700-52C-SI.
Note:
|
? |
Forty-eight 10/100/1000BASE-T ports |
|
? |
One console port |
|
? |
ETH management port |
|
? |
USB port |
|
? |
Front card slot |
На рисунке 3 показана задняя панель S5700-52C-SI.
Note:
|
? |
ESD jack |
|
? |
Rear card slot |
|
? |
Fan slot |
|
? |
Power module slot 2 |
|
? |
Power module slot 1 |
The Modules, Cards
Table 2 shows the recommended elements for the S5700-52C-SI.
|
GE-SFP Optical Transceiver |
|
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
10G-SFP+ Optical Transceiver |
|
|
SFP-10G-USR |
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
|
OMXD30000 |
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
|
OSX010000 |
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
|
GE Copper Transceiver |
|
|
SFP-1000BaseT |
Electrical Transceiver, SFP, GE, Electrical Interface Module(100m, RJ45) |
|
10GE Interface Card |
|
|
ES5D000X2S00 |
2 10 Gig SFP+ interface card(used in S5700SI and S5700EI series |
Сравнить похожие товары
Table 3 shows the comparison of S5700-52C-SI and S5700-52C-EI.
|
Product Code |
S5700-52C-SI |
S5700-52C-EI |
|
Fixed Interfaces |
48 Ethernet 10/100/1,000 ports |
48 x 10/100/1,000 Base-T ports |
|
Subcards supported |
4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard |
4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard |
|
Extended Slots |
two extended slots, one for an uplink subcard and the other for a stack card |
two extended slots, one for an uplink sub-card and the other for a stack card |
|
Power Supply |
Double hot swappable AC/DC power supplies |
Double hot-swappable AC/DC power supplies |
|
Forwarding Performance |
132 Mpps |
132 Mpps |
|
Switching Capacity |
256 Gbit/s |
256 Gbit/s |
|
Memory (RAM) |
256 MB |
256 MB |
|
Flash |
32 MB |
32 MB |
|
RPS |
Not supported |
Not supported |
|
PoE |
Not supported |
Not supported |
|
Maximum power consumption (100% throughput, full speed of fans) |
78 W |
< 88W |
Comparison between LI, SI, EI and HI
Huawei S5700 Series Enterprise Switches provides LI (Lite), SI (Standard), EI (Enhanced) and HI (Hyper) models for users. There are some differences among these four versions.
Click this PDF to know more.
Comparison of Huawei S5700-LI, SI, EI and HI Series Switches.pdf.
Что бы получить больше информации
У вас есть какие-либо вопросы о S5700-52C-SI?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics |
| Security | User privilege management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface, and VLAN Port isolation, port security, and sticky MAC Blackhole MAC address entries Limit on the number of learned MAC addresses 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist 802.1x authentication, MAC address authentication, and combined authentication on a per port basis Portal authentication on a per VLANIF interface basis |
| VLAN | 4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping |
| Input Voltage | AC: Rated voltage range: 100V to 240V, 50/60 Hz Maximum voltage range: 90V to 264V, 50/60 Hz DC: Rated voltage range: –48V to –60V, Maximum voltage range: –36V to –72V Note: PoE-support switches do not use DC power supplies. |
| Power Consumption | < 78W |
| Switching Capacity | 256 Gbit/s |
| Forwarding Performance | 132 Mpps |
| Extended Slots | two extended slots, one for an uplink subcard and the other for a stack card |
| Management and Maintenance | Stacking MAC Forced Forwarding (MFF) Virtual cable test SNMP v1/v2c/v3 RMON Web-based NMS System logs and alarms of different levels |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
| Operating Environment | Operating temperature: 0°C to 50°C Relative humidity: 5% to 95% (non-condensing) |
| Fixed Ports | 48 10/100/1,000 Base-T |
| MAC Address Table | IEEE 802.1d compliance 16K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses |
| Reliability | RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover SEP ERPS (G.8032) STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection |
| IP Routing | Static route, RIPv1, RIPv2, RIPng, and ECMP |
| IPv6 Features | Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type MLD v1/v2 snooping 6to4 tunnel, ISATAP tunnel, and manually configured tunnel |
| QoS/ACL | Rate limiting on packets sent and received by an interface Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports |
Теги: S5700-52C-SI