+7 (812) 309 34 73. Договоримся!
Общая информация (S5700-28X-PWR-LI-AC)
The S5700-28X-PWR-LI-AC gigabit enterprise switch is next-generation energy-saving switch developed by Huawei. With front power sockets, it can be installed in the 300 mm deep cabinet and be maintained through the front panel, saving space in small equipment rooms, widely used in various application scenarios like enterprise park access, convergence, gigabit access of data center application scenarios. Using advanced energy conservation technology plus twenty-four 10/100/1,000 Base-T Ethernet ports, four 10 GE SFP+ ports and POE function, the S5700-28X-PWR-LI-AC is dedicated to helping enterprise customers build a reliable and secure next-generation IT network.
Быстрые спецификацииs
На рисунке 1 показан внешний вид Huawei S5700-28X-PWR-LI-AC.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
S5700-28X-PWR-LI-AC |
|
Fixed Ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
|
MAC Address Table Size |
16 MAC |
|
Voltage Required |
AC Rated voltage range: 100V to 240V AC, 50/60 Hz Maximum voltage range: 90V to 264V AC, 47/63 Hz |
|
Power Device |
AC power supply, supporting RPS |
|
Power Consumption Operational |
< 448.8W (PoE: 370W) |
|
Forwarding Performance |
96 Mpps |
|
Switching Capacity |
256 Gbit/s |
|
PoE |
Supported |
|
Dimensions (W x D x H) |
442 mm x 220 mm x 43.6 mm |
|
Weight |
6.6 kg |
Детали продукта
На рисунке 2 показана передняя панель Huawei S5700-28X-PWR-LI-AC.
Note:
|
? |
Twenty-four PoE+ 10/100/1000BASE-T ports |
? |
Four 10GE SFP+ ports |
|
? |
One mini USB port |
? |
One console port |
На рисунке 3 показана задняя панель Huawei S5700-28X-PWR-LI-AC.
Note:
|
? |
Ground screw |
? |
RPS socket |
|
? |
Jack for AC terminal locking latch |
? |
AC socket |
*The ground screw is used with a ground cable.
*RPS socket is used with an RPS cable, which is not hot swappable.
A PoE switch can have an RPS power supply connected to this socket to provide inputs for system power supply and PoE power supply. The two inputs are independent of each other. The RPS power supply can also be used as a backup of the system power supply when it does not provide PoE power.
* The AC terminal locking latch is not delivered with the switch.
* AC socket is used with an AC power cable.
Recommended Modules
Table 2 shows the recommended modules.
|
|
Model |
Description |
|
10GE SFP+ Optical Transceiver |
OMXD30000 |
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm,0.3km,LC) |
|
OSX010000 |
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm,10km,LC) |
|
|
SFP-10G-USR |
10G Base-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm,0.1km,LC) |
|
|
GE-SFP Optical Transceiver |
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
|
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) |
|
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
|
|
GE copper transceiver |
SFP-1000BaseT |
Electrical Transceiver, SFP, GE, Electrical Interface Module(100m,RJ45) |
Compare with Similar Item
Table 3 shows the comparison of Huawei S5700-28X-LI-AC and S5700-28X-LI-24S-AC and S5700-28X-PWR-LI-AC.
|
Models |
S5700-28X-LI-AC |
S5700-28X-LI-24S-AC |
S5700-28X-PWR-LI-AC |
|
Fixed Ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
|
Forwarding Performance |
96 Mpps |
96 Mpps |
96 Mpps |
|
Switching Capacity |
256 Gbit/s |
256 Gbit/s |
256 Gbit/s |
|
Power Supply |
AC model and DC model, supporting RPS |
AC model and DC model, supporting RPS |
|
|
Power Consumption |
< 41W |
< 60W |
< 448.8W (PoE: 370W) |
Comparison between LI, SI, EI and HI
Huawei S5700 Series Enterprise Switches provides LI (Lite), SI (Standard), EI (Enhanced) and HI (Hyper) models for users. There are some differences among these four versions.
Click this PDF to know more.
Comparison of Huawei S5700-LI, SI, EI and HI Series Switches.pdf
Что бы получить больше информации
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Input voltage | AC:<BR>Rated voltage range: 100 V to 240 V AC, 50/60 Hz<BR>Maximum voltage range: 90 V to 264 V AC, 47/63 Hz<BR>DC:<BR>Rated voltage range: –48 V to –60 V, DC<BR>Maximum voltage range: –36 V to –72 V DC<BR>Note: PoE-support switches do not use DC power supplies. |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave<BR>Multicast forwarding in a VLAN and multicast replication between VLANs<BR>Multicast load balancing among member ports of a trunk<BR>Controllable multicast<BR>Port-based multicast traffic statistics<BR>IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series) |
| Security | User privilege management and password protection<BR>DoS attack defense, ARP attack defense, and ICMP attack defense<BR>Binding of the IP address, MAC address, interface, and VLAN<BR>Port isolation, port security, and sticky MAC<BR>MFF<BR>Blackhole MAC address entries<BR>Limit on the number of learned MAC addresses<BR>802.1x authentication and limit on the number of users on an interface<BR>AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC<BR>SSH v2.0<BR>Hypertext Transfer Protocol Secure (HTTPS)<BR>CPU defense<BR>Blacklist and whitelist |
| VLAN | 4K VLANs<BR>Guest VLAN and voice VLAN<BR>GVRP<BR>MUX VLAN<BR>VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports<BR>1:1 and N:1 VLAN Mapping<BR>SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series) |
| Ring protection | RRPP ring topology and RRPP multi-instance<BR>Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover<BR>SEP<BR>ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series)<BR>STP, RSTP, and MSTP<BR>BPDU protection, root protection, and loop protection<BR>BPDU Tunnel |
| MPLS features | MPLS L3VPN<BR>MPLS L2VPN(VPWS/VPLS)<BR>MPLS-TE<BR>MPLS QoS<BR>Notes: supported by S5710-EI, S5700-HI and S5710-HI |
| Management and maintenance | Virtual cable test<BR>Port mirroring and RSPAN (remote port mirroring)<BR>Remote configuration and maintenance using Telnet<BR>SNMP v1/v2c/v3<BR>RMON<BR>Web NMS<BR>HGMP<BR>System logs and alarms of different levels<BR>802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI)<BR>Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches)<BR>NetStream (supported by the S5710-EI, S5700-HI and S5710-HI)<BR>sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series) |
| MAC address table | IEEE 802.1d compliance<BR>MAC address learning and aging<BR>Static, dynamic, and blackhole MAC address entries<BR>Packet filtering based on source MAC addresses<BR>MAC address entries:<BR>S5700S-LI series: 8K, S5700-LI/S5700-SI series: 16K, S5700-EI series: 32K, S5720-EI series: 64K, S5700-HI series: S5700-HI: 32K, S5710-HI: 456K, S5720-HI: 128K |
| IP routing | Static routing<BR>RIPv1, RIPv2 and RIPng,ECMP(supported by the S5700-SI/S5700-EI/S5700-HI series)<BR>OSPF, OSPFv3, IS-IS, IS-ISv6, BGP and BGP4+ (supported by the S5700-EI/S5700-HI series) |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST)<BR>Supports LNP (Similar to DTP)<BR>Supports VCMP (Similar to VTP) |
| IPv6 features | Neighbor Discovery (ND)<BR>Path MTU (PMTU)<BR>IPv6 ping, IPv6 tracert, and IPv6 Telnet<BR>ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type<BR>MLD v1/v2 snooping<BR>6to4 tunnel, ISATAP tunnel, and manually configured tunnel(supported by the S5700-SI/S5700-EI/S5700-HI series) |
| Operating environment | Operating temperature: 0 –50<BR>Relative humidity: 10%–90% (non-condensing) |
| Reliability | Ethernet OAM (IEEE 802.3ah and 802.1ag)<BR>ITU-Y.1731<BR>DLDP<BR>LACP<BR>E-Trunk(supported by the S5700-SI/S5700-EI/S5700-HI series)<BR>BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM (supported by the S5700-EI/S5700-HI series) |
| QoS/ACL | Rate limiting on packets sent and received by an interface<BR>Packet redirection<BR>Port-based traffic policing and two-rate three-color CAR<BR>Eight queues on each port<BR>WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms<BR>WRED (supported by the S5710-EI and S5700-HI)<BR>Re-marking of the 802.1p priority and DSCP priority<BR>Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID<BR>Rate limiting in each queue and traffic shaping on ports |
| Access Security | DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
Теги: S5700-28X-PWR-LI-AC