60 618.42 Рубль
+7 (812) 309 34 73. Договоримся!
Общая информация (S5700-28TP-PWR-LI-AC)
The S5700-28TP-PWR-LI-AC gigabit enterprise switch is next-generation energy-saving switch developed by Huawei. With 24 Ethernet ports, 2 Gig SFP and 2 dual-purpose 10/100/1,000SFP, it provides a large switching capacity and high-density GE ports to implement 10 Gbit/s upstream transmissions, widely used in various application scenarios like enterprise park access, convergence, gigabit access of data center application scenarios. Using advanced energy conservation technology plus PoE function, the S5700-28TP-PWR-LI-AC is dedicated to helping enterprise customers build a reliable and secure next-generation IT network.
Быстрые спецификацииs
На рисунке 1 показан внешний вид Huawei S5700-28TP-PWR-LI-AC.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
S5700-28TP-PWR-LI-AC |
|
Fixed Ports |
24 x 10/100/1,000 Base-T Ethernet ports, 2 Gig SFP and 2 dual-purpose 10/100/1,000SFP |
|
MAC Address Table Size |
16 MAC |
|
Voltage Required |
AC Rated voltage range: 100V to 240V AC, 50/60 Hz Maximum voltage range: 90V to 264V AC, 47/63 Hz |
|
Power Device |
AC power supply, supporting RPS |
|
Power Consumption Operational |
< 469.7W |
|
Forwarding Performance |
42 Mpps |
|
Switching Capacity |
256 Gbit/s |
|
Dimensions (W x D x H) |
442 mm x 310 mm x 43.6 mm |
|
Weight |
5.7kg |
Детали продукта
На рисунке 2 показана передняя панель Huawei S5700-28TP-PWR-LI-AC.
Note:
|
? |
Twenty-four PoE+ 10/100/1000BASE-T ports |
? |
Two 1000BASE-X ports |
|
? |
Two combo ports |
? |
One mini USB port |
|
? |
One console port |
|
|
На рисунке 3 показана задняя панель Huawei S5700-28TP-PWR-LI-AC.
Note:
|
? |
Ground screw |
? |
RPS socket |
|
? |
Jack for AC terminal locking latch |
? |
AC socket |
* The ground screw is used with a ground cable.
*RPS socket is used with an RPS cable, which is not hot swappable.
A PoE switch can have an RPS power supply connected to this socket to provide inputs for system power supply and PoE power supply. The two inputs are independent of each other. The RPS power supply can also be used as a backup of the system power supply when it does not provide PoE power.
*The AC terminal locking latch is not delivered with the switch.
*AC socket is used with an AC power cable.
Optical Modules
Table 2 shows the recommended optical modules.
|
|
Model |
Description |
|
FE-SFP Optical Transceiver |
SFP-FE-SX-MM1310 |
Optical Transceiver,SFP,100M/155M,Multi-mode Module(1310nm,2km,LC) |
|
eSFP-FE-LX-SM1310 |
Optical Transceiver,eSFP,100M/155M,Single-mode Module(1310nm,15km,LC) |
|
|
S-SFP-FE-LH40-SM1310 |
Optical Transceiver, eSFP, FE, Single-mode Module(1310nm,40km,LC) |
|
|
GE-SFP Optical Transceiver |
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
|
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) |
|
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
|
|
GE copper transceiver |
SFP-1000BaseT |
Electrical Transceiver, SFP , GE ,Electrical Interface Module(100m,RJ45) |
Compare with Similar Item
Table 3 shows the comparison of Huawei S5700-28P-LI-AC, S5700-28P-PWR-LI, S5700-28TP-LI-AC and S5700-28TP-PWR-LI-AC.
|
Models |
S5700-28P-LI-AC |
S5700-28P-PWR-LI |
S5700-28TP-LI-AC |
S5700-28TP-PWR-LI-AC |
|
Fixed Ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports, 2 x Combo 10/100/1,000 Base-T Ethernet ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports, 2 x Combo 10/100/1,000 Base-T Ethernet ports |
|
Power Supply |
AC |
AC |
AC |
AC |
|
PoE |
Not supported |
Supported |
Not supported |
Supported |
|
Forwarding Performance |
42 Mpps |
42 Mpps |
42 Mpps |
42 Mpps |
|
Switching Capacity |
256 Gbit/s |
256 Gbit/s |
256 Gbit/s |
256 Gbit/s |
Comparison between LI, SI, EI and HI
Huawei S5700 Series Enterprise Switches provides LI (Lite), SI (Standard), EI (Enhanced) and HI (Hyper) models for users. There are some differences among these four versions.
Click this PDF to know more.
Comparison of Huawei S5700-LI, SI, EI and HI Series Switches.pdf
Get More Information
Do you have any question about the Huawei S5700-28TP-PWR-LI-AC switch?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Dimensions (W x D x H) | 442 mm x 310 mm x 43.6 mm |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Interface-based multicast traffic statistics |
| Security | Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface number, and VLAN ID Port isolation, port security, and sticky MAC MFF Blackhole MAC address entries Limit on the number of learned MAC addresses IEEE 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH V2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist |
| Input Voltage | AC: Rated voltage range: 100V to 240V, 50 Hz/60 Hz, Maximum voltage range: 90V to 264V, 47 Hz/63 Hz |
| Power Consumption | S5701-28TP-PWR-LI-AC < 238.7W (PoE: 185W) |
| Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration Automatically loading the system software package and patches of clients One-click and automatic delivery of service configurations Supports independent running client |
| Management and Maintenance | iStack (excluding S5700-10P-LI-AC, S5700-10P-PWR-LI-AC, S5700S-28P-LI-AC, S5700S-52P-LI-AC and battery LAN switches) Virtual Cable Test (VCT) Remote configuration and maintenance using Telnet SNMP v1/v2c/v3 RMON eSight and web-based NMS HTTPS LLDP/LLDP-MED System logs and multi-level alarms 802.3az EEE Dying Gasp (excluding battery LAN switches) Device hibernation mode (excluding PWR serials switches, battery LAN switches, S5700-10P-LI, S5700-28X-LI-24S, S5701-28X-LI-24S-AC and S5700-52X-LI-48CS-AC) |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP) Supports VCMP (Similar to VTP) |
| Operating Environment | Long-term operating temperature: 0°C to 50°C Relative humidity: 5% to 95% (non-condensing) |
| Power Socket Position | rear power sockets |
| Battery | One slot for lead-acid battery charger module (supported by battery LAN switches) |
| Fixed Ports | S5700-28TP-LI-AC/S5700-28TP-PWR-LI-AC/S5701-28TP-PWR-LI-AC: 24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports, 2 x Combo 10/100/1,000 Base-T Ethernet ports |
| MAC Address Table | 16K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses Interface-based MAC learning limiting |
| VLAN Features | 4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and interfaces 1:1 and N:1 VLAN mapping |
| Jumbo frame | 10K |
| Reliability | RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP ERPS (G.8032) STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection BPDU tunnel |
| IP Routing | Static route, RIP, RIPng (S5700-10P-LI-AC/S5700-10P-PWR-LI-AC do not support RIPng) |
| IPv6 Features | Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, and protocol type MLD v1/v2 snooping |
| QoS/ACL | Rate limiting on packets sent and received by an interface Packet redirection Interface-based traffic policing and two-rate and three-color CAR Eight queues on each interface WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on interfaces |
| Access Security | DHCP relay, DHCP server, DHCP snooping, and DHCP security |
| Lightning Protection | Service interface: 6 kV |
Теги: S5700-28TP-PWR-LI-AC