+7 (812) 309 34 73. Договоримся!
Общая информация (S5700-28P-LI-BAT)
Huawei S5700-28P-LI-BAT is one of the S5700-LI switches. The S5700-LI series gigabit enterprise switches (S5700-LI) are next-generation energy-saving switches developed by Huawei to meet the demand for high-bandwidth access and Ethernet multi-service aggregation. Based on cutting-edge hardware and Huawei Versatile Routing Platform (VRP) software, the S5700-LI provides a large switching capacity and high-density GE ports. The S5700-LI can be used in various enterprise network scenarios. For example, it can function as an accessaggregation switch on a campus network, a gigabit access switch in an Internet data center (IDC),a desktop switch to provide 1000 Mbit/s access for terminals. The S5700-LI is easy to install and maintain, reducing workloads for network planning, construction, and maintenance. Featuring advanced reliability, security, and energy conservation technologies, the S5700-LI helps enterprise customers build next-generation IT networks.
Быстрые спецификацииs
На рисунке 1 показан внешний вид S5700-28P-LI-BAT.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
S5700-28P-LI-BAT |
|
Fixed Interfaces |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports |
|
Power Supply |
AC power supply |
|
Forwarding Performance |
42 Mpps |
|
Switching Capacity |
256 Gbit/s |
|
Memory (RAM) |
256 MB |
|
Flash |
200 MB |
|
RPS |
Not supported |
|
PoE |
Not supported |
|
Maximum power consumption (100% throughput, full speed of fans) |
23 W |
|
Dimensions (W x D x H) |
442.0 mm x 310.0 mm x 43.6 mm (17.4 in. x 12.2 in. x 1.72 in.) |
|
Weight |
≤ 5 kg (11.02 lb) |
Детали продукта
На рисунке 2 показана передняя панель S5700-28P-LI-BAT.
Note:
|
? |
Twenty-four 10/100/1000BASE-T ports |
|
? |
Four 1000BASE-X ports |
|
? |
One console port |
На рисунке 3 показана задняя панель S5700-28P-LI-BAT.
Note:
|
? |
Ground screw |
|
? |
AC socket |
|
? |
Jack for AC terminal locking latch |
|
? |
Battery slot |
The Modules
Table 2 shows the recommended elements for the S5700-28P-LI-BAT.
|
Model |
Description |
|
GE-SFP Optical Transceiver |
|
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
GE Copper Transceiver |
|
|
SFP-10G-USR |
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
Lithium Battery Module |
|
|
BAT-8AHA |
Huawei BAT-8AHA Rechargeable Battery for S5700 |
|
BAT-4AHA
|
Huawei BAT-4AHA BAT-4AHA Lithium ion battery unit for S5700 |
Сравнить похожие товары
Table 3 shows the comparison of S5700-28P-LI-BAT, S5700-28X-LI-DC and S5700-28X-LI-24S-DC.
|
Product Code |
S5700-28P-LI-BAT |
S5700-28X-LI-DC |
S5700-28X-LI-24S-DC |
|
Fixed Interfaces |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports |
24 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
24 x GE SFP ports, 4 x Combo 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports |
|
Power Supply |
AC power supply |
DC model, supporting RPS |
DC model, supporting RPS |
|
Forwarding Performance |
42 Mpps |
96 Mpps |
96 Mpps |
|
Switching Capacity |
256 Gbit/s |
256 Gbit/s |
256 Gbit/s |
|
Memory (RAM) |
256 MB |
256 MB |
256 MB |
|
Flash |
200 MB |
200 MB |
200 MB |
|
RPS |
Not supported |
Supported |
Supported |
|
PoE |
Not supported |
Not supported |
Not supported |
|
Maximum power consumption (100% throughput, full speed of fans) |
23 W |
42 W |
57 W |
Comparison between LI, SI, EI and HI
Huawei S5700 Series Enterprise Switches provides LI (Lite), SI (Standard), EI (Enhanced) and HI (Hyper) models for users. There are some differences among these four versions.
Click this PDF to know more.
Comparison of Huawei S5700-LI, SI, EI and HI Series Switches.pdf.
Что бы получить больше информации
У вас есть какие-либо вопросы о S5700-28P-LI-BAT?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Dimensions (W x D x H) | 442 mm x 310 mm x 43.6 mm |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Interface-based multicast traffic statistics |
| Security | Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface number, and VLAN ID Port isolation, port security, and sticky MAC MFF Blackhole MAC address entries Limit on the number of learned MAC addresses IEEE 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH V2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist |
| Input Voltage | AC: Rated voltage range: 100V to 240V, 50 Hz/60 Hz, Maximum voltage range: 90V to 264V, 47 Hz/63 Hz DC: Rated voltage range: –48V to –60V, Maximum voltage range: –36V to –72V Note: Models supporting PoE do not use DC power supplies. |
| Power Consumption | < 23W |
| Super Virtual Fabric (SVF) | Working as an SVF client that is plug-and-play with zero configuration Automatically loading the system software package and patches of clients One-click and automatic delivery of service configurations Supports independent running client |
| Management and Maintenance | Virtual Cable Test (VCT) Remote configuration and maintenance using Telnet SNMP v1/v2c/v3 RMON eSight and web-based NMS HTTPS LLDP/LLDP-MED System logs and multi-level alarms 802.3az EEE |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP) Supports VCMP (Similar to VTP) |
| Operating Environment | Long-term operating temperature: 0°C to 45°C Relative humidity: 5% to 95% (non-condensing) |
| Power Socket Position | rear power sockets |
| Battery | One slot for lead-acid battery charger module (supported by battery LAN switches) |
| Fixed Ports | 24 x 10/100/1,000 Base-T Ethernet ports, 4 x GE SFP ports |
| MAC Address Table | 16K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses Interface-based MAC learning limiting |
| VLAN Features | 4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and interfaces 1:1 and N:1 VLAN mapping |
| Jumbo frame | 10K |
| Reliability | RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover SEP ERPS (G.8032) STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection BPDU tunnel |
| IP Routing | Static route, RIP, RIPng |
| IPv6 Features | Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, and protocol type MLD v1/v2 snooping |
| QoS/ACL | Rate limiting on packets sent and received by an interface Packet redirection Interface-based traffic policing and two-rate and three-color CAR Eight queues on each interface WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on interfaces |
| Access Security | DHCP relay, DHCP server, DHCP snooping, and DHCP security |
| Lightning Protection | Service interface: 6 kV |
Теги: S5700-28P-LI-BAT