16 724.43 Рубль
+7 (812) 309 34 73. Договоримся!
The Huawei S1728GWR-4P is web-managed switch which is easy to install and maintain through the rack, running the function of LACP, STP/RSTP/MSTP to implement the link extension and backup effectively. With rich safety features, it can prevent attacks from hackers and virus in order to build secure, reliable, high-performance and multi-service networks for small- and medium-size enterprises.
Quick Specs
Figure 1 shows the appearance of Huawei S1728GWR-4P switch.
|
Product Code |
S1728GWR-4P |
|
Type |
Switch - 24 ports |
|
Downlink Ports |
24 x 10/100/1000 + 4 x Gigabit SFP |
|
MAC Address Table Size |
8K entries |
|
Voltage Required |
AC 120/230 V ( 50/60 Hz ) |
|
Power Device |
Internal power supply |
|
Power Consumption Operational |
20 Watt |
|
Forwarding performance |
42 Mpps |
|
Switching capacity |
56 Gbps |
|
Dimensions (W x D x H) |
44.2 cm x 22 cm x 4.4 cm |
|
Compliant Standards
|
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1p, IEEE 802.3x, IEEE 802.3az |
Product Details
Figure 2 shows the front panel of Huawei S1728GWR-4P switch.
Note：
|
① |
Ethernet Electrical Port Indicator |
④ |
10/100/1000BASE-T port |
|
② |
1000BASE-X port indicator |
⑤ |
1000BASE-X port |
|
③ |
Power/System status indicator |
⑥ |
Reset button |
☆Reset button: This button is used to reset the switch. Resetting the switch will cause service interruption. Exercise caution when you press the Reset button. To restore the factory settings, hold down the button for at least 6 seconds. To reset the system, press the button. An S1728GWR-4P has a built-in AC power supply, which provides power for the entire switch.
Table 2 shows the LED Indicators description.
|
Indicator |
Status |
Description |
|
Power indicator |
Steady green |
The switch is powered on. |
|
Off |
The switch is powered off. |
|
|
System status indicator |
Steady green |
The switch is starting or working abnormally. |
|
Blinking green |
The switch is working properly. |
|
|
Off |
The switch is not started. |
|
|
10/100/1000BASE-T Ethernet port indicator |
Steady green |
The port is connected at the rate of 1000 Mbit/s. |
|
Blinking green |
The port is connected at the rate of 1000 Mbit/s and transmitting data. |
|
|
Steady yellow |
The port is connected at the rate of 10/100 Mbit/s. |
|
|
Blinking yellow |
The port is connected at the rate of 10/100 Mbit/s and transmitting data. |
Figure 3 shows the back panel of Huawei S1728GWR-4P.
Note：
|
① |
Ground screw |
|
② |
AC power jack |
Compare with Similar Item
Table 3 shows the comparison between S1700-28FR-2T2P-AC / S1700-28GFR-4P-AC and S1728GWR-4P.
|
Model |
S1728GWR-4P |
S1700-28FR-2T2P-AC |
S1700-28GFR-4P-AC |
|
Downlink Ports |
24 Ethernet 10/100/1000 ports |
24 Ethernet 10/100 ports |
24 Ethernet 10/100/1,000 ports |
|
Uplink Ports |
4 Gig SFP |
2 Ethernet 10/100/1000 ports and 2 Gig SFP |
4 Gig SFP |
|
MAC Address Table |
8K MAC |
8K MAC |
8K MAC |
|
Dimensions (W x D x H) |
442mm x 220 mm x 43.6 mm |
442 mm x 220 mm x 43.6 mm |
442 mm x 220 mm x 43.6 mm |
|
Power consumption |
<15W |
<25W |
<30W |
|
EEE |
Supported |
NA |
Supported |
Get more information
Do you have any question about the Huawei S1728GWR-4P switch?
Contact us now via Live Chat or info@itg-spb.ru.
S1728GWR-4P Specifications |
|
|
Type |
Huawei S1700 Web-managed Switch |
|
Downlink Ports |
24 Ethernet 10/100/1,000 ports |
|
Uplink Ports |
4 Gig SFP |
|
MAC Address Table |
8K MAC |
|
Dimensions in mm (W x D x H) |
442 mm x 220 mm x 43.6 mm |
|
Input Voltage |
100V to 240V AC, 50 Hz/60 Hz |
|
EEE |
Supported |
|
Power Consumption |
< 15W |
|
Operating Temperature |
0°C to 45°C |
|
Humidity (non-condensing) |
5% to 90% |
|
Heat Dissipation |
Fan-free natural heat dissipation |
|
Security features |
Packet filtering based on MAC addresses |
|
VLANs |
256 VLANs (S1720 Series: 4K) |
|
QoS |
PQ and WRR |
|
STP |
STP (IEEE 802.1d) |
|
Multicast |
IGMP snooping |
|
Routing Features |
IPv4 and IPv6 static routing (S1720 series) |
|
Link Aggregation |
12 Link Aggregation Groups (LAGs) with a maximum of eight ports in each LAG |
|
Port Mirroring |
Port-based bi-directional flow mirroring |
|
Broadcast Storm Suppression |
Broadcast storm suppression based on the interface rate |
|
Device Management |
Web system network management |
|
Device Maintenance |
System log |
| Характеристики | |
| Broadcast Storm Suppression | Broadcast storm suppression based on the interface rateAlarm sending when the traffic rate reaches the upper limit |
| Device Maintenance | System logPingVirtual Cable Test (VCT)Link Layer Discovery Protocol (LLDP) |
| Device management | Web system network managementDHCP clientOne-key restoration |
| Dimensions in mm (W x D x H) | 442 mm x 220 mm x 43.6 mm |
| Downlink ports | 24 Ethernet 10/100/1,000 ports |
| EEE | Supported |
| Heat dissipation | Fan-free natural heat dissipation |
| Humidity (non-condensing) | 5% to 90% |
| Input voltage | 100V to 240V AC, 50 Hz/60 Hz |
| Link Aggregation | 12 Link Aggregation Groups (LAGs) with a maximum of eight ports in each LAG64 Link Aggregation Groups (S1720 series)Static LACP |
| MAC Address Table | 8K MAC |
| Multicast | IGMP snooping |
| Operating Temperature | 0°C to 45°C |
| Port mirroring | Port-based bi-directional flow mirroring |
| Power consumption | |
| QoS | PQ and WRRFour queues on each port (S1720 series: Eight)Queue scheduling based on 802.1p or DSCP priorities |
| Routing features | IPv4 and IPv6 static routing (S1720 series) |
| Security features | Packet filtering based on MAC addressesMAC address authentication (S1720 Series)Port-based 802.1x authenticationRADIUS authenticationPortal authentication (S1720 Series)Port isolationStorm suppression (S1720 Series)DHCP snooping (S1720 Series) |
| STP | STP (IEEE 802.1d)RSTP (IEEE 802.1w)MSTP (IEEE 802.1s) (S1720 series) |
| Type | Huawei S1700 Web-managed Switch |
| Uplink ports | 4 Gig SFP |
| VLANs | 256 VLANs (S1720 Series: 4K)Access portTrunk portHybrid portManagement VLANVoice VLAN |
Теги: S1728GWR-4P Huawei