+7 (812) 309 34 73. Договоримся!
Huawei EH1B06EACD00 is the Huawei S9706 Basic Engine AC Bundle (Including Assembly Chassis, SRUD Main Board*1, 12-Port 10GBASE-X Interface Card (SA,SFP+) *1, 2200W AC Power*2, Basic Software*1). The S9700 series terabit routing switches are high-end switches designed for next-generation campus networks and data centers to implement service aggregation. EH1BS9703E00 is only a chassis without any modules. The service cards, MPUs, fan module, power supply modules must be ordered separately.
Quick Specs
Table 1 shows the Quick Specs.
|
Product Code |
EH1B06EACD00 |
|
Bundle |
Huawei S9706 Basic Engine AC Bundle(Including Assembly Chassis, SRUD Main Board*1, 12-Port 10GBASE-X Interface Card (SA,SFP+) *1, 2200W AC Power*2, Basic Software*1) |
|
Switching Capacity |
6.72 Tbit/s; 14.72 Tbit/s |
|
Packet Forwarding Rate |
2,880 Mpps/5,040 Mpps |
|
Service Slots |
6 |
|
IP Routing |
IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and BGP4+ |
|
Dimensions (H x W x D in mm) |
441.7 mm x 442 mm x 489 mm, 10U |
|
Chassis weight(empty) |
29 kg |
|
Operating Voltage |
DC: –40V to –72V AC: 90V to 290V |
|
Power supply capability of the equipment |
4,400W |
Product Details
Figure 1 shows the front panel of S9706 for references.
Note：
|
① |
Six service cards slots |
⑤ |
Two EH1D200CMU00-Centralized Monitoring Unit |
|
② |
Two MPUs |
⑥ |
Reserved slots |
|
③ |
A pair of mounting brackets |
⑦ |
Front ESD jack |
|
④ |
Four power modules |
⑧ |
Cable management frames |
Figure 2 shows the back panel of S9706 for references.
Note：
|
① |
Two Fan Module |
|
② |
Rear ESD jack |
|
③ |
JG ground terminal |
|
④ |
Air filter |
|
⑤ |
A pair of removable handles |
The Modules, Cards and Optical Transceiver
Table 2 shows the recommended accessories of S9706.
|
Model |
Description |
|
Firewall Modules |
|
|
ET1D2FW00S00 |
NGFW Module A,with HW General Security Platform Software |
|
ET1D2FW00S01 |
NGFW Module B,with HW General Security Platform Software |
|
ET1D2FW00S02 |
NGFW Module C,with HW General Security Platform Software |
|
FE Interface Card |
|
|
EH1D2F48SEA0 |
48-Port 100BASE-X Interface Card(EA,SFP) |
|
EH1D2F48SEC0 |
48-Port 100BASE-X Interface Card(EC,SFP) |
|
EH1D2F48TEA0 |
48-Port 10/100BASE-T Interface Card(EA,RJ45) |
|
GE Interface Card |
|
|
EH1D2G24SEC0 |
24-Port 100/1000BASE-X Interface Card(EC,SFP) |
|
EH1D2G48SEC0 |
48-Port 100/1000BASE-X Interface Card(EC,SFP) |
|
GE/10GE Interface Card |
|
|
EH1D2S04SX1E |
4-Port 10GBASE-X and 24-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T Combo Interface Card(X1E,RJ45/SFP/SFP+) |
|
EH1D2S24XEA0 |
24-Port 100/1000BASE-X and 2-Port 10GBASE-X Interface Card(EA,SFP/XFP) |
|
10GE Interface Card |
|
|
EH1D2X04XEA0 |
4-Port 10GBASE-X Interface Card(EA,XFP) |
|
EH1D2X08SED4 |
8-Port 10GBASE-X Interface Card(EA,XFP) |
|
EH1D2X12SSA0 |
12-Port 10GBASE-X Interface Card(EA,XFP) |
|
EH1D2X16SFC0 |
16-Port 10GBASE-X Interface Card(EA,XFP) |
|
EH1D2X32SSC0 |
32-Port 10GBASE-X Interface Card(EA,XFP) |
|
Fan Module |
|
|
EH1M00FBX000 |
Wide Voltage 74 Fan Box |
|
Power Module |
|
|
PAC-2200WF |
2200W AC Power Module |
|
W2PSA0800 |
800W AC Power Module(Black) |
|
W2PSD2200 |
2200W DC Power Module(Black) |
|
GE-SFP Optical Transceiver |
|
|
SFP-1000BaseT |
Electrical Transceiver, SFP, GE, Electrical Interface Module(100m,RJ45) |
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
|
10GE SFP+ optical transceiver |
|
|
SFP-10G-USR |
10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC) |
|
OMXD30000 |
Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC) |
|
OSX010000 |
Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,10km,LC) |
Compare to Similar Items
Table 3 shows the comparison.
|
Models |
EH1B06EACD00 |
EH1BS9706E00 |
|
Type |
Huawei S9706 Basic Engine AC Bundle (Including Assembly Chassis, SRUD Main Board*1, 12-Port 10GBASE-X Interface Card (SA,SFP+) *1, 2200W AC Power*2, Basic Software*1) |
S9706 Assembly Chassis |
|
Switching Capacity |
6.72 Tbit/s or 14.72 Tbit/s |
6.72 Tbit/s or 14.72 Tbit/s |
|
Packet Forwarding Rate |
2,880 Mpps or 5,040 Mpps |
2,880 Mpps or 5,040 Mpps |
|
Service Slots |
6 |
6 |
Get more information
Do you have any question of Huawei EH1B06EACD00 switch?
Contact us now via Live Chat or info@itg-spb.ru.
EH1B06EACD00 Specifications |
|
|
Series |
Huawei S9706 Switch |
|
Bundle |
Huawei S9706 Basic Engine AC Bundle(Including Assembly Chassis, SRUD Main Board*1, 12-Port 10GBASE-X Interface Card (SA,SFP+) *1, 2200W AC Power*2, Basic Software*1) |
|
Switching capacity |
6.72 Tbit/s; 14.72 Tbit/s |
|
Packet forwarding rate |
2,880 Mpps/5,040 Mpps |
|
Service slots |
6 |
|
Wireless network management |
Native AC AP access control, AP region management, and AP profile management Radio profile management, uniform static configuration, and centralized dynamic management Basic WLAN services, QoS, security, and user management |
|
User management |
unified user management 802.1x, MAC address, and Portal authentication Traffic- and time-based accounting User authorization based on user groups, domains, and time ranges |
|
iPCA quality awareness |
Marking real service packets to obtain real-time count of dropped packets and packet loss ratio Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks |
|
SVF 2.0 virtualization |
Virtualizing access switches (ASs) and APs into one logical device to simplify management and maintenance Two layers of ASs allowed in an SVF system Third-party devices allowed between SVF parent and clients |
|
VLAN |
Supports adding access, trunk, and hybrid interfaces to VLANs Supports the default VLAN Supports VLAN switching Supports QinQ and selective QinQ Supports MAC address-based VLAN assignment |
|
MAC address |
Supports automatic learning and aging of MA C addresses Supports static, dynamic, and blackhole MAC address entries Supports packet filtering based on sour ce MAC addresses Supports MAC address limiting based on ports and VL ANs |
|
STP/ERPS |
Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) Supports BPDU protection, root protection, and loop protection Supports BPDU tunnel ERPS (G.8032) |
|
IP routing |
Supports IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS Supports IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and BGP4+ |
|
Multicast |
Supports IGMP v1/v2/v3, IGMPv1/v2/v3 snooping Supports PIM-SM, PIM-DM, PIM-SSM Supports MSDP, MBGP Supports prompt leave Supports multicast traffic control Supports multicast querier Supports suppression on multicast packets Supports multicast CAC Supports multicast ACL |
|
MPLS |
Supports basic MPLS functions Supports MPLS OAM Supports MPLS TE Supports MPLS VPN/VLL/VPLS |
|
Reliability |
Supports LACP and E-Trunk Supports VRRP and BFD for VRRP Supports BFD for BGP/IS-IS/OSPF/static route NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP Supports TE FRR and IP FRR Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware level) HSR Supports ITU-Y.1731 Supports DLDP |
|
QoS |
Supports traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority Supports actions of ACL, CAR, re-mark, and schedule Supports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, and SP+DRR Supports congestion avoidance mechanisms, such as WRED and tail drop Supports H-QoS Supports traffic shaping |
|
Network synchronization |
Ethernet synchronization 1588v2 |
|
Dimensions (H x W x D in mm) |
441.7 mm x 442 mm x 489 mm, 10U |
|
Chassis weight(empty) |
29 kg |
|
Operating Voltage |
DC: –40V to –72V AC: 90V to 290V |
|
Power supply capability of the equipment |
4,400W |
| Характеристики | |
| Bundle | Huawei S9706 Basic Engine AC Bundle(Including Assembly Chassis, SRUD Main Board*1, 12-Port 10GBASE-X Interface Card (SA,SFP+) *1, 2200W AC Power*2, Basic Software*1) |
| Chassis weight(empty) | 29 kg |
| Dimensions (H x W x D in mm) | 441.7 mm x 442 mm x 489 mm, 10U |
| IP Routing | Supports IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-ISSupports IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, andBGP4+ |
| iPCA Quality Awareness | Marking real service packets to obtain real-time count of dropped packets andpacket loss ratioCounting number of dropped packets and packet loss ratio on devices and L2/L3networks |
| MAC Address | Supports automatic learning and aging of MA C addressesSupports static, dynamic, and blackhole MAC address entriesSupports packet filtering based on sour ce MAC addressesSupports MAC address limiting based on ports and VL ANs |
| MPLS | Supports basic MPLS functionsSupports MPLS OAMSupports MPLS TESupports MPLS VPN/VLL/VPLS |
| Multicast | Supports IGMP v1/v2/v3, IGMPv1/v2/v3 snoopingSupports PIM-SM, PIM-DM, PIM-SSMSupports MSDP, MBGPSupports prompt leaveSupports multicast traffic controlSupports multicast querierSupports suppression on multicast packetsSupports multicast CACSupports multicast ACL |
| Network Synchronization | Ethernet synchronization1588v2 |
| Operating Voltage | DC: –40V to –72VAC: 90V to 290V |
| Packet forwarding rate | 2,880 Mpps/5,040 Mpps |
| Power supply capability of the equipment | 4,400W |
| QoS | Supports traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4protocols, and 802.1p prioritySupports actions of ACL, CAR, re-mark, and scheduleSupports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, andSP+DRRSupports congestion avoidance mechanisms, such as WRED and tail dropSupports H-QoSSupports traffic shaping |
| Reliability | Supports LACP and E-TrunkSupports VRRP and BFD for VRRPSupports BFD for BGP/IS-IS/OSPF/static routeNSR, NSF, and GR for BGP/IS-IS/OSPF/LDPSupports TE FRR and IP FRRSupports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware level)HSRSupports ITU-Y.1731Supports DLDP |
| Series | Huawei S9706 Switch |
| Service Slots | 6 |
| STP/ERPS | Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)Supports BPDU protection, root protection, and loop protectionSupports BPDU tunnelERPS (G.8032) |
| SVF 2.0 virtualization | Virtualizing access switches (ASs) and APs into one logical device to simplifymanagement and maintenanceTwo layers of ASs allowed in an SVF systemThird-party devices allowed between SVF parent and clients |
| Switching capacity | 6.72 Tbit/s; 14.72 Tbit/s |
| User Management | unified user management802.1x, MAC address, and Portal authenticationTraffic- and time-based accountingUser authorization based on user groups, domains, and time ranges |
| VLAN | Supports adding access, trunk, and hybrid interfaces to VLANsSupports the default VLANSupports VLAN switchingSupports QinQ and selective QinQSupports MAC address-based VLAN assignment |
| Wireless Network Management | Native ACAP access control, AP region management, and AP profile managementRadio profile management, uniform static configuration, and centralized dynamicmanagementBasic WLAN services, QoS, security, and user management |
Теги: Huawei S9706 Chassis with SRUD, 2*AC Power (EH1B06EACD00) Huawei