Huawei S5731-S48T4X

S5731-S48T4X

Производитель: Huawei

Код товара: Huawei S5731-S48T4X

0 отзывов

Артикул:

160 600.19 Рубль

Сроки: 14 дней

Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

The Huawei CloudEngine S5731-S series switches were developed based on next-generation high-performing hardware and the Huawei Versatile Routing Platform (VRP). The CloudEngine S5731-S supports simplified operations and maintenance (O&M), intelligent stack (iStack), flexible Ethernet networking. It also provides enhanced Layer 3 features and mature IPv6 features. The CloudEngine S5731-S can be used in various scenarios. For example, it can be used as an access or aggregation switch on a campus network or as an access switch for Metropolitan Area Network.

Quick Specs

Table 1 shows the Quick Specs.

Product Code	S5731-S48T4X
Fixed port	48 x 10/100/1000Base-T ports, 4 x 10GE SFP+ ports
Dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm
Chassis height	1 U
Power supply type	• 150 W AC (pluggable) • 600 W AC (pluggable) • 1000 W DC (pluggable)
Rated voltage range	• AC input (150 W AC ): 100 V AC to 240 V AC, 50/60 Hz • AC input (600 W AC ): 100 V AC to 240 V AC, 50/60 Hz • DC input (1000 W DC): -48 VDC to -60 V DC
Maximum voltage range	• AC input (150 W AC ): 90 V AC to 264 V AC, 47 Hz to 63 Hz • AC input (600 W AC ): 90 V AC to 290 V AC, 45 Hz to 65 Hz • High-voltage DC input (600 W AC): 190 V DC to 290 V DC (meeting 240 V high-voltage DC certification) • DC input (1000 W DC): -38.4 V DC to -72V DC
Maximum power consumption	124 W

Product Details

The Huawei S5731-S series switches provides these features and highlights:

* Powerful Service Processing Capability and Multiple Security Control Mechanisms

* Easy O&M

* Multiple Reliability Mechanisms

* Mature IPv6 Technologies

* Intelligent Stack (iStack)

* VXLAN Features

* PoE Power Supply

* Intelligent O&M

* Intelligent Upgrade

* Big Data Security Collaboration

* OPS

The Modules

Table 2 shows the recommended products.

Model	Description
PAC600S12-CB	600W AC Power Module(Back to Front, Power panel side exhaust)
eSFP-GE-SX-MM850	Optical Transceiver,eSFP,GE,Multi-mode Module(850nm,0.55km,LC)
S-SFP-GE-LH40-SM1550	Optical Transceiver,eSFP,GE,Single-mode Module(1550nm,40km,LC)
SFP-GE-LX-SM1310	Optical Transceiver,eSFP,GE,Single-mode Module(1310nm,10km,LC)
S-SFP-GE-LH40-SM1310	Optical Transceiver,eSFP,GE,Single-mode Module(1310nm,40km,LC)
S-SFP-GE-LH80-SM1550	Optical Transceiver,eSFP,GE,Single-mode Module(1550nm,80km,LC)
SFP-GE-ZBXU1	Optical Transceiver,eSFP,GE,BiDi Single-mode Module(1490nm(Tx)/1570nm(Rx),80km,LC)
SFP-GE-LX-SM1490-BIDI	Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1490/RX1310,10km,LC)
SFP-GE-ZBXD1	Optical Transceiver,eSFP,GE,BIDI Single-mode Module(1570nm(Tx)/1490nm(Rx),80km,LC)
LE2MGSC40DE0	Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1310/RX1490,40km,LC)
SFP-GE-LX-SM1310-BIDI	Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1310/RX1490,10km,LC)
LE2MGSC40ED0	Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1490/RX1310,40km,LC)
SFP-GE-BXU1-SC	1000Base,BIDI Optical Transceiver,SFP,GE,Single-mode Module(TX1490nm/RX1310nm,10km,SC)
SFP-10G-BXD1	10GBase,BIDI Optical Transceiver,SFP+,10G,Single-mode Module(TX1330nm/RX1270nm,10km,LC)
SFP-10G-ZR	10GBase-ZR Optical Transceiver,SFP+,10G,Single-mode Module(1550nm,80km,LC)
OSX040N01	Optical Transceiver,SFP+,10G,Single-mode Module(1550nm,40km,LC)

Compare to Similar Items

Table 3 shows the comparison.

Product Code	S5731-S24P4X	S5731-S24T4X	S5731-S48P4X	S5731-S48T4X
Fixed port	24 x 10/100/1000Base-T (PoE+) ports, 4 x 10GE SFP+ ports	442 mm x 420 mm x 43.6 mm	48 x 10/100/1000Base-T (PoE+) ports, 4 x 10GE SFP+ ports	48 x 10/100/1000Base-T ports, 4 x 10GE SFP+ ports
Dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm	1 U	442 mm x 420 mm x 43.6 mm	442 mm x 420 mm x 43.6 mm
Chassis height	1 U	8.4 kg	1 U	1 U
Chassis weight (including packaging)	8.6 kg	• 150 W AC (pluggable) • 600 W AC (pluggable) • 1000 W DC (pluggable)	8.8 kg	8.55 kg
Power supply type	1000 W PoE AC (pluggable)	• AC input (150 W AC ): 100 V AC to 240 V AC, 50/60 Hz • AC input (600 W AC ): 100 V AC to 240 V AC, 50/60 Hz • DC input (1000 W DC): -48 VDC to -60 V DC	1000 W PoE AC (pluggable)	• 150 W AC (pluggable) • 600 W AC (pluggable) • 1000 W DC (pluggable)
Rated voltage range	AC input (1000 W AC PoE): 100 V AC to 240 V AC, 50/60 Hz		AC input (1000 W AC PoE): 100 V AC to 240 V AC, 50/60 Hz	• AC input (150 W AC ): 100 V AC to 240 V AC, 50/60 Hz • AC input (600 W AC ): 100 V AC to 240 V AC, 50/60 Hz • DC input (1000 W DC): -48 VDC to -60 V DC
Maximum power consumption	• 121 W (without PD) • 977 W (with PD, PD power consumption of 720 W)	114 W	• 132 W (without PD) • 1750 W (with PD, PD power consumption of 1440 W)	124 W

Get More Information

Do you have any question about the S5731-S48T4X?

S5731-S48T4X Specification
Fixed port	48 x 10/100/1000Base-T ports, 4 x 10GE SFP+ ports
Dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm
Chassis height	1 U
Chassis weight (including packaging)	8.55 kg
Power supply type	• 150 W AC (pluggable) • 600 W AC (pluggable) • 1000 W DC (pluggable)
Rated voltage range	• AC input (150 W AC ): 100 V AC to 240 V AC, 50/60 Hz • AC input (600 W AC ): 100 V AC to 240 V AC, 50/60 Hz • DC input (1000 W DC): -48 VDC to -60 V DC
Maximum voltage range	• AC input (150 W AC ): 90 V AC to 264 V AC, 47 Hz to 63 Hz • AC input (600 W AC ): 90 V AC to 290 V AC, 45 Hz to 65 Hz • High-voltage DC input (600 W AC): 190 V DC to 290 V DC (meeting 240 V high-voltage DC certification) • DC input (1000 W DC): -38.4 V DC to -72V DC
Maximum power consumption	124 W
Noise	• Under normal temperature (sound power): 57.5dB (A) • Under high temperature (sound power): 70.9dB (A) • Under normal temperature (sound pressure): 47.5dB (A)
Operating temperature	• 0-1800 m altitude: -5°C to +45°C • 1800-5000 m altitude: The operating temperature reduces by 1ºC every time the altitude increases by 220 m.
Storage temperature	-40℃ to +70℃
Relative humidity	5% to 95% (non-condensing)
Surge protection specification (service port)	Common mode: ±6 kV
Surge protection specification (power port)	• AC power port: ±6 kV in differential mode, ±6 kV in common mode • DC power port: ±2 kV in differential mode, ±4 kV in common mode
Heat dissipation	Air cooling heat dissipation, intelligent speed adjustment, and pluggable fans
Service Features
MAC address table	IEEE 802.1d standards compliance 32K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses
VLAN	4094 VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports VLAN mapping
Ethernet loop protection	RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switching SEP ERPS (G.8032) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection
IP routing	Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, routing policy Up to 16K FIBv4 entries Up to 8K FIBv4 entries
Interoperability	VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST Link-type Negotiation Protocol (LNP), similar to DTP VLAN Central Management Protocol (VCMP), similar to VTP
IPv6 features	Up to 8K ND entries PMTU IPv6 Ping, IPv6 Tracert, and IPv6 Telnet ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types Multicast Listener Discovery snooping (MLDv1/v2) IPv6 addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN
Multicast	IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM MSDP MVPN
QoS/ACL	Rate limiting in the inbound and outbound directions of a port Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues per port DRR, SP and DRR+SP queue scheduling algorithms WRED Re-marking of the 802.1p and DSCP fields of packets Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Queue-based rate limiting and shaping on ports
Security	Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC MAC Forced Forwarding (MFF) Blackhole MAC address entries Limit on the number of learned MAC addresses IEEE 802.1x authentication and limit on the number of users on a port AAA authentication, RADIUS authentication, and HWTACACS authentication NAC SSH V2.0 HTTPS CPU protection Blacklist and whitelist Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets Secure Boot IPSec ECA Deception
Reliability	LACP E-trunk Ethernet OAM (IEEE 802.3ah and IEEE 802.1ag) ITU-Y.1731 DLDP LLDP BFD for BGP, BFD for IS-IS, BFD for OSPF, BFD for static route
VXLAN*	VXLAN L2 and L3 gateways Centralized and distributed gateway BGP-EVPN Configured through the NETCONF protocol
Super Virtual Fabric (SVF)	A two-layer client architecture is supported. IGMP snooping can be enabled on access switches (ASs) and the maximum number of access users on a port can be configured. ASs can be independently configured. Services that are not supported by templates can be configured on the parent. Third-party devices are allowed between SVF parent and clients. Working as an SVF client that is plug-and-play with zero configuration
iPCA	Directly coloring service packets to collect real-time statistics on the number of lost packets and packet loss ratio Collection of statistics on the number of lost packets and packet loss ratio at network and device levels
TWAMP	Two-way IP link performance measurement Measurement on two-way packet delay, one-way packet loss rate, and one-way packet jitter
Management and maintenance	iStack, with up to 9 member switches in a stack SNMP v1/v2c/v3 RMON Smart Application Control (SAC) Web-based NMS System logs and alarms of different levels GVRP MUX VLAN NetStream Intelligent O&M
*CloudEngine S5731-S series switches require the VXLAN license or N1 advanced software package to support the VXLAN feature.

Характеристики
4094 VLANsGuest VLAN and voice VLANGVRPMUX VLANVLAN assignment b	Ethernet loop protection
A two-layer client architecture is supported.IGMP snooping can b	iPCA
Chassis Height	1 U
Chassis weight (including packaging)	8.55 kg
Dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm
Directly coloring service packets to collect real-time statistic	TWAMP
Fixed port	48 x 10/100/1000Base-T ports, 4 x 10GE SFP+ ports
Heat dissipation	Air cooling heat dissipation, intelligent speed adjustment, and pluggable fans
Hierarchical user management and password protectionDoS attack d	Reliability
IEEE 802.1d standards compliance32K MAC address entriesMAC addre	VLAN
IGMP v1/v2/v3 snooping and IGMP fast leaveMulticast forwarding i	QoS/ACL
iStack, with up to 9 member switches in a stackSNMP v1/v2c/v3RMO	*CloudEngine S5731-S series switches require the VXLAN license or N1 advanced software package to support the VXLAN feature.
LACPE-trunkEthernet OAM (IEEE 802.3ah and IEEE 802.1ag)ITU-Y.173	VXLAN*
Maximum power consumption	124 W
Maximum voltage range	• AC input (150 W AC ): 90 V AC to 264 V AC, 47 Hz to 63 Hz• AC input (600 W AC ): 90 V AC to 290 V AC, 45 Hz to 65 Hz• High-voltage DC input (600 W AC): 190 V DC to 290 V DC (meeting 240 V high-voltage DC certification)• DC input (1000 W DC): -38.4 V DC to -72V DC
Noise	• Under normal temperature (sound power): 57.5dB (A)• Under high temperature (sound power): 70.9dB (A)• Under normal temperature (sound pressure): 47.5dB (A)
Operating Temperature	• 0-1800 m altitude: -5°C to +45°C• 1800-5000 m altitude: The operating temperature reduces by 1ºC every time the altitude increases by 220 m.
Power supply type	• 150 W AC (pluggable)• 600 W AC (pluggable)• 1000 W DC (pluggable)
Rate limiting in the inbound and outbound directions of a portPa	Security
Rated voltage range	• AC input (150 W AC ): 100 V AC to 240 V AC, 50/60 Hz• AC input (600 W AC ): 100 V AC to 240 V AC, 50/60 Hz• DC input (1000 W DC): -48 VDC to -60 V DC
Relative humidity	5% to 95% (non-condensing)
RRPP ring topology and RRPP multi-instanceSmart Link tree topolo	IP routing
Service Features	MAC address table
Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BG	Interoperability
Storage temperature	-40℃ to +70℃
Surge protection specification (power port)	• AC power port: ±6 kV in differential mode, ±6 kV in common mode• DC power port: ±2 kV in differential mode, ±4 kV in common mode
Surge protection specification (service port)	Common mode: ±6 kV
Two-way IP link performance measurementMeasurement on two-way pa	Management and maintenance
Up to 8K ND entriesPMTUIPv6 Ping, IPv6 Tracert, and IPv6 TelnetA	Multicast
VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and R	IPv6 features
VXLAN L2 and L3 gatewaysCentralized and distributed gatewayBGP-E	Super Virtual Fabric (SVF)

Написать отзыв

Теги: S5731-S48T4X Huawei

Корзина покупок