Huawei S6720-32C-PWH-SI-AC

S6720-32C-PWH-SI-AC

Производитель: Huawei

Код товара: Huawei S6720-32C-PWH-SI-AC

0 отзывов

Артикул:

346 478.49 Рубль

Сроки: 14 дней

Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

Huawei S6720-SI series switches are next-generation multi-gigabit 10GE fixed switches. They are ideal for high-speed wireless device access, 10GE data center server access, and campus network access/aggregation.

Quick Specs

Figure 1 shows the appearance of Huawei S6720-32C-PWH-SI-AC switch.

Table 1 shows the Quick Specs.

Product Code	S6720-32C-PWH-SI -AC
Switching Capacity	2.56 Tbit/s
Forwarding Performance	240 Mpps
Fixed ports	24x100M/1G/2.5G/5G/10GBase-T Ethernet ports, 4x10GE SFP+
Extended slots	One extended slot,support 240GE QSFP+，410GE SFP+
Dimensions (W x D x H, mm)	442 x 420 x 44.4
Height	1 U
Typical power consumption	• 650W DC/580W AC without card and PD: 106.9W • 1150W AC /1000W AC without card and PD: 121.6W
Maximum power consumption (W)	• 650W DC/580W AC (without card and PD): 125.6W • 1150W AC/1000W AC(without card and PD): 125.6W

Product Details

Figure 2 shows the front panel of Huawei S6720-32C-PWH-SI-AC switch.

front panel of S6720-32C-PWH-SI-AC

Note:

①	Twenty-four PoE++ 100M/1000M/2.5GE/5GE/10GE BASE-T ports (MultiGE port)	④	One USB port
②	Four 10GE SFP+ ports	⑤	One ETH management port
③	One console port	⑥	One PNP button

Figure 3 shows the back panel of Huawei S6720-32C-PWH-SI-ACI switch.

back panel of S6720-32C-PWH-SI-AC

Note:

①	Ground screw	④	Fan slot
②	ESN label	⑤	Power module slot 2
③	Rear card slot	⑥	Power module slot 1

The Modules

Table 2 shows the recommended products.

Model	Description
eSFP-GE-SX-MM850	Optical Transceiver, eSFP, GE, Multi-mode Module (850nm, 0.5km, LC)
SFP-GE-LX-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module (1310nm, 10km, LC)
S-SFP-GE-LH40-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module (1310nm, 40km, LC)
eSFP-GE-ZX100-SM1550	eSFP, GE, Single-mode Module (1550nm, 100km, LC)
SFP-GE-LX-SM1310-BIDI	BiDi Transceiver, eSFP, Tx1310nm/Rx1490nm, 1.25Gb/s, -9dBm, -3dBm, -19.5dBm, LC, SM, 10km
SFP-GE-LX-SM1490-BIDI	BiDi Transceiver, eSFP, Tx1490nm/Rx1310nm, 1.25Gb/s, -9dBm, -3dBm, -19.5dBm, LC, SM, 10km
SFP-GE-ZBXD1	Huawei Optical Transceiver SFP-GE-ZBXD1, eSFP, GE, BIDI Single-mode Module (1570nm (Tx)/1490nm (Rx), 80km, LC)
SFP-10G-USR	10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module (850nm, 0.1km, LC)
SFP-10G-ILR	Optical Transceiver, SFP+, 9.8G, Single-mode Module (1310nm, 1.4km, LC)
SFP-10G-ER-1310	Optical Transceiver, SFP+, 10G, Single-mode Module (1310nm, 40km, LC)
HUAWEI SFP-10G-ZR	Huawei 10GBase-ZR Optical Transceiver, SFP+, 10G, Single-mode Module (1550nm, 80km, LC)

Compare to Similar Items

Table 3 shows the comparison.

Product Code	S6720-32C-PWH-SI-AC	S6720-56C-PWH-SI-AC
Switching Capacity	2.56 Tbit/s	2.56 Tbit/s
Forwarding Performance	240 Mpps	240 Mpps
Fixed ports	24x100M/1G/2.5G/5G/10GBase-T Ethernet ports, 4x10GE SFP+	32x10/100/1000Base-T Ethernet ports, 16x100M/1G/2.5G/5G/10GBase-T Ethernet ports, 4x10GE SFP+
Extended slots	One extended slot,support 240GE QSFP+，410GE SFP+	One extended slot,support 240GE QSFP+，410GE SFP+
Dimensions (W x D x H, mm)	442 x 420 x 44.4	442 x 420 x 44.4
Height	1 U	1 U
Typical power consumption	• 650W DC/580W AC without card and PD: 106.9W • 1150W AC /1000W AC without card and PD: 121.6W	Without card and PD: 91.01W
Maximum power consumption (W)	• 650W DC/580W AC (without card and PD): 125.6W • 1150W AC/1000W AC(without card and PD): 125.6W	• 650W DC/580W AC (without card and PD): 120.5W • 1150W AC /1000W AC(without card and PD): 120.5W

Get More Information

Do you have any question about the S6720-32C-PWH-SI-AC?

S6720-32C-PWH-SI-AC Specification
Switching Capacity	2.56 Tbit/s
Forwarding Performance	240 Mpps
Fixed ports	24x100M/1G/2.5G/5G/10GBase-T Ethernet ports, 4x10GE SFP+
Extended slots	One extended slot, support 240GE QSFP+，410GE SFP+
MAC address table	32K MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses
VLAN features	4K VLANs Guest VLAN and voice VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports VLAN mapping Super VLAN Basic QinQ and selective QinQ
IPv4 routing	Static routing, RIPv1, RIPv2, ECMP, URPF, OSPF, IS-IS, and BGP VRRP Policy-based routing Routing policies
IPv6 routing	Static routing RIPng OSPFv3 BGP4+ ISISv6
IPv6 features	Neighbor Discovery (ND) and ND snooping IPv6 Ping VRRP6 DHCPv6 snooping, DHCPv6 server, and DHCPv6 relay MLDv1 and MLDv2 PIM-DM for IPv6 PIM-SM for IPv6 6 Over 4 tunnels
Multicast	IGMP V1/V2/V3 snooping Fast leave IGMP snooping proxy MLD snooping Port-based multicast traffic suppression Inter-VLAN multicast replication Controllable multicast IGMP v1/v2/v3 PIM-SM and PIM-DM Multicast Source Discovery Protocol (MSDP) Multicast routing policies
QoS/ACL	Traffic classification based on ACLs Traffic classification based on outer 802.1p fields, inner VLAN IDs, outer VLAN IDs, source MAC addresses, and Ethernet types Access control after traffic classification Traffic policing based on traffic classifiers Re-marking based on traffic classifiers Class-based packet queuing Associating traffic classifiers with traffic behaviors Rate limiting on inbound and outbound ports Traffic shaping based on ports and queues Tail drop Priority Queuing (PQ) Deficit Round Robin (DRR) PQ + DRR scheduling Weighted Round Robin (WRR) PQ + WRR scheduling
Reliability	STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover Smart Ethernet Protection (SEP) G.8032 Ethernet Ring Protection Switching (ERPS) BFD for OSPF, IS-IS, VRRP, and PIM protocols Enhanced trunk (E-trunk)
Security features	Defense against DoS, ARP, and ICMP attacks Binding of the IP address, MAC address, port number, and VLAN ID of a user Port isolation, port security, and sticky MAC MAC-Forced Forwarding (MACFF) Limit on the number of learned MAC addresses IEEE 802.1X authentication, MAC address authentication, Portal authentication, and hybrid authentication Authentication methods, including AAA, RADIUS, and HWTACACS CPU defense MACSec
Super Virtual Fabric (SVF)	SVF Parent and Client
Management and maintenance	iStack (using service ports as stack ports) Virtual Cable Test (VCT) Ethernet OAM (IEEE 802.3ah and 802.1ag) SNMPv1/v2c/v3 RMON Web-based network management system and relevant features System logs and multi-level alarms GVRP MUX VLAN sFlow Hypertext Transfer Protocol Secure (HTTPS) SSH1.5/SSH2
Operating environment	Working temperature: 0–1800 m, 0–45°C; 1800–5000 m, the highest operating temperature reduces by 1°C every time the altitude increases by 220 m. Relative humidity: 5%–95% (noncondensing)
Input voltage	AC: • Rated voltage range: 100 V to 240 V AC, 50/60 Hz • Maximum voltage range: 90 V to 264 V AC, 47/63Hz DC: • Rated voltage range: –48 V to –60 V DC • Maximum voltage range: –36 V to –72 V DC
Dimensions (W x D x H, mm)	442 x 420 x 44.4
Height	1 U
Typical power consumption	• 650W DC/580W AC without card and PD: 106.9W • 1150W AC /1000W AC without card and PD: 121.6W
Maximum power consumption (W)	• 650W DC/580W AC (without card and PD): 125.6W • 1150W AC/1000W AC(without card and PD): 125.6W

Характеристики
Dimensions (W x D x H, mm)	442 x 420 x 44.4
Extended slots	One extended slot, support 240GE QSFP+，410GE SFP+
Fixed ports	24x100M/1G/2.5G/5G/10GBase-TEthernet ports, 4x10GE SFP+
Forwarding Performance	240 Mpps
Height	1 U
Input voltage	AC:• Rated voltage range: 100 V to 240 V AC, 50/60 Hz• Maximum voltage range: 90 V to 264 V AC, 47/63HzDC:• Rated voltage range: –48 V to –60 V DC• Maximum voltage range: –36 V to –72 V DC
IPv4 routing	Static routing, RIPv1, RIPv2, ECMP, URPF, OSPF, IS-IS, and BGPVRRPPolicy-based routingRouting policies
IPv6 features	Neighbor Discovery (ND) and ND snoopingIPv6 PingVRRP6DHCPv6 snooping, DHCPv6 server, and DHCPv6 relayMLDv1 and MLDv2PIM-DM for IPv6PIM-SM for IPv66 Over 4 tunnels
IPv6 routing	Static routingRIPngOSPFv3BGP4+ISISv6
MAC Address Table	32KMAC address learning and agingStatic, dynamic, and blackhole MAC address entriesPacket filtering based on source MAC addresses
Management and Maintenance	iStack (using service ports as stack ports)Virtual Cable Test (VCT)Ethernet OAM (IEEE 802.3ah and 802.1ag)SNMPv1/v2c/v3RMONWeb-based network management system and relevant featuresSystem logs and multi-level alarmsGVRPMUX VLANsFlowHypertext Transfer Protocol Secure (HTTPS)SSH1.5/SSH2
Maximum power consumption (W)	• 650W DC/580W AC (without card and PD): 125.6W• 1150W AC/1000W AC(without card and PD): 125.6W
Multicast	IGMP V1/V2/V3 snoopingFast leaveIGMP snooping proxyMLD snoopingPort-based multicast traffic suppressionInter-VLAN multicast replicationControllable multicastIGMP v1/v2/v3PIM-SM and PIM-DMMulticast Source Discovery Protocol (MSDP)Multicast routing policies
Operating Environment	Working temperature: 0–1800 m, 0–45°C; 1800–5000 m, the highest operating temperature reduces by 1°C every time the altitude increases by 220 m.Relative humidity: 5%–95% (noncondensing)
QoS/ACL	Traffic classification based on ACLsTraffic classification based on outer 802.1p fields, inner VLAN IDs, outer VLAN IDs, source MAC addresses, and Ethernet typesAccess control after traffic classificationTraffic policing based on traffic classifiersRe-marking based on traffic classifiersClass-based packet queuingAssociating traffic classifiers with traffic behaviorsRate limiting on inbound and outbound portsTraffic shaping based on ports and queuesTail dropPriority Queuing (PQ)Deficit Round Robin (DRR)PQ + DRR schedulingWeighted Round Robin (WRR)PQ + WRR scheduling
Reliability	STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)BPDU protection, root protection, and loop protectionRRPP ring topology and RRPP multi-instanceSmart Link tree topology and Smart Link multi-instance, providing millisecond-level protectionswitchoverSmart Ethernet Protection (SEP)G.8032 Ethernet Ring Protection Switching (ERPS)BFD for OSPF, IS-IS, VRRP, and PIM protocolsEnhanced trunk (E-trunk)
Security features	Defense against DoS, ARP, and ICMP attacksBinding of the IP address, MAC address, port number, and VLAN ID of a userPort isolation, port security, and sticky MACMAC-Forced Forwarding (MACFF)Limit on the number of learned MAC addressesIEEE 802.1X authentication, MAC address authentication, Portal authentication, and hybridauthenticationAuthentication methods, including AAA, RADIUS, and HWTACACSCPU defenseMACSec
Super Virtual Fabric (SVF)	SVF Parent and Client
Switching capacity	2.56 Tbit/s
Typical power consumption	• 650W DC/580W AC without card and PD: 106.9W• 1150W AC /1000W AC without card and PD: 121.6W
VLAN Features	4K VLANsGuest VLAN and voice VLANVLAN assignment based on MAC addresses, protocols, IP subnets, policies, and portsVLAN mappingSuper VLANBasic QinQ and selective QinQ

Написать отзыв

Теги: S6720-32C-PWH-SI-AC Huawei

Корзина покупок