+7 (812) 309 34 73. Договоримся!
LS-S2326TP-EI-AC is one of the Huawei S2300 Series Switches. The S2300 series switches are new generation Ethernet intelligent access switches developed by Huawei. The S2300 is mainly deployed on the IP MAN and intranets, meeting the requirements of carrying various Ethernet services and accessing the Ethernet. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP) software, the S2300 supports rich and flexible service features and thus improves operability, manageability, and service expansibility. The S2300 is a case-shaped device with a 1U chassis. The S2300 series are classified into SI and EI models. Huawei S2300 Series Switch S2326TP-EI Mainframe 24 10/100 FastEthernet ports and 2 Combo GE 10/100/1000 Rj-45 + 100/1000 SFP) ports, AC 110/220V, QoS, comprehensive Layer 2 Feature.
Quick Specs
Figure 1 shows the appearance of LS-S2326TP-EI-AC.
Table 1 shows the Quick Specs.
Product Code |
LS-S2326TP-EI-AC |
Fixed Ports |
twenty-four 10/100Base-TX ports and two gigabit Combo ports (10/100/1000Base-T or 100/1000Base-X) |
Forwarding performance |
6.6 Mpps |
Port switching capacity |
8.8 Gbit/s |
Backplane switching capacity |
32 Gbit/s |
Power supplies |
AC: Rated voltage: 100 V to 240 V, 50/60 Hz Maximum voltage: 90 V to 264 V, 50/60 Hz |
Power consumption |
< 15.5 W |
Dimensions: width x depth x height |
442 mm x 220 mm x 43.6 mm |
Weight |
< 2.4 kg |
Product Details
Figure 2 shows the front-right panel of LS-S2326TP-EI-AC.
The Modules
Table 2 shows the recommended elements for the LS-S2326TP-EI-AC.
Model |
Description |
FE-SFP Optical Transceiver |
|
SFP-FE-SX-MM1310 |
Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC) |
eSFP-FE-LX-SM1310 |
Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC) |
S-SFP-FE-LH40-SM1310 |
Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC) |
GE-SFP Optical Transceiver |
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
GE Copper Transceiver |
|
SFP-1000BaseT |
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
Compare to Similar Items
Table 3 shows the comparison of LS-S2326TP-EI-AC, LS-S2309TP-PWR-EI and LS-S2326TP-PWR-EI.
Product Code |
LS-S2326TP-EI-AC |
LS-S2309TP-PWR-EI |
LS-S2326TP-PWR-EI |
Fixed Ports |
twenty-four 10/100Base-TX ports and two gigabit Combo ports (10/100/1000Base-T or 100/1000Base-X) |
eight 10/100Base-TX ports and one gigabit Combo port (10/100/1000Base-T or 100/1000Base-X) |
twenty-four 10/100Base-TX ports and two gigabit Combo ports (10/100/1000Base-T or 100/1000Base-X) |
Forwarding performance |
6.6 Mpps |
2.7 Mpps |
6.6 Mpps |
Port switching capacity |
8.8 Gbit/s |
3.6 Gbit/s |
8.8 Gbit/s |
Backplane switching capacity |
32 Gbit/s |
32 Gbit/s |
32 Gbit/s |
Power supplies |
AC power supplies
|
supports two pluggable AC power supplies and PoE supplies |
Supports AC power supplies and PoE |
Power consumption |
< 15.5 W |
154 W,PoE power = 124 W |
868 W, PoE power = 740 W |
PoE (Power over Ethernet) |
No |
Yes |
Yes |
Dimensions: width x depth x height |
442 mm x 220 mm x 43.6 mm |
320 mm x 220 mm x 43.6 mm |
442 mm x 420 mm x 43.6 mm |
Weight |
< 2.4 kg |
2.5 kg |
4 kg |
Get more information
Do you have any question about the LS-S2326TP-EI-AC?
Contact us now via Live Chat or info@itg-spb.ru.
LS-S2326TP-EI-AC Specifications |
|
Port |
twenty-four 10/100Base-TX ports and two gigabit Combo ports (10/100/1000Base-T or 100/1000Base-X) |
Forwarding performance |
6.6 Mpps |
Port switching capacity |
8.8 Gbit/s |
Backplane switching capacity |
32 Gbit/s |
MAC address table |
Supports 8 K MAC address entries. Supports manual addition and deletion of a MAC address table. Supports configuration of MAC address aging time. Supports disabling of MAC address learning based on port or aggregation group. Supports limit on the number of MAC addresses to be learned on a port. Supports blackhole MAC addresses. |
VLAN features |
Supports IEEE 802.1Q (VLAN) and 4096 VLANs. Supports port-based VLAN. Supports MAC-based VLAN. Supports basic QinQ. Supports 1:1 VLAN switching. Supports N:1 VLAN switching. |
QoS |
Supports port rate limit and traffic rate limit. Supports four queues with different priorities on each port. Supports mapping of packets to different queues based on 802.1p. Supports multiple algorithms including SP, WRR, and SP+WRR. Supports traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, Layer-4 port number, protocol type, VLAN ID, Ethernet frame protocol type, and CoS. Supports traffic-based priority marking and packet redirection. |
IPv6 features |
Supports IPv6 host functions. Supports static route configuration. Supports IPv6 ACL. Supports MLD v1/v2 snooping. |
Multicast |
Supports IGMP v1/v2/v3 snooping. Supports multicast load sharing among bundled ports. Supports port-based multicast rate limit and traffic statistics |
Port mirroring |
Supports 1:1 or N:1 port mirroring. Supports Remote Switched Port Analyzer (RSPAN) and traffic-based mirroring. Supports packet forwarding on an observing port. |
Security |
Supports IEEE 802.1X authentication and the limit on the maximum number of users on a port. Supports dynamic ARP detection. Supports IP Source Guard. Supports multiple authentication methods including AAA, RADIUS, HWTACACS+, and NAC. Supports binding of the IP address, MAC address, port number, and VLAN ID. Support port rate limit. Supports port isolation, port security, and sticky MAC. Supports packet filtering. Supports packet filtering based on MAC addresses. Supports suppression of multicast, broadcast, and unknown single-cast packets. Supports limit on the number of MAC addresses to be learned. Supports CPU protection. |
Surge protection |
Each port has a surge protection capability of 7 kV. Each port has a surge protection capability of 15 kV after an extra surge protection device is added. |
Management |
Supports iStack. Supports automatic configuration. Supports CLI configuration. Supports remote configuration and maintenance by using Telnet. Supports SNMP v1/v2/v3. Supports RMON. Supports HGMP v2. Supports SSH v2. Supports Web management. Supports GVRP. |
Operating environment |
Operating temperature: 0°C to 50°C (long term); –5°C to 55°C (short term); relative humidity: 10% to 90% (non-condensing) |
Power supply |
AC: Rated voltage: 100 V to 240 V, 50/60 Hz Maximum voltage: 90 V to 264 V, 50/60 Hz |
Dimensions: width x depth x height |
442 mm x 220 mm x 43.6 mm |
Weight |
< 2.4 kg |
Power consumption |
< 15.5 W |
Характеристики | |
Backplane switching capacity | 32 Gbit/s |
Dimensions: width x depth x height | 442 mm x 220 mm x 43.6 mm |
Forwarding Performance | 6.6 Mpps |
IPv6 features | Supports IPv6 host functions.Supports static route configuration.Supports IPv6 ACL. Supports MLD v1/v2 snooping. |
MAC Address Table | Supports 8 K MAC address entries. Supports manual addition and deletion of a MAC address table. Supports configuration of MAC address aging time. Supports disabling of MAC address learning based on port or aggregation group. Supports limit on the number of MAC addresses to be learned on a port. Supports blackhole MAC addresses. |
Management | Supports iStack.Supports automatic configuration.Supports CLI configuration.Supports remote configuration and maintenance by using Telnet.Supports SNMP v1/v2/v3. Supports RMON.Supports HGMP v2. Supports SSH v2.Supports Web management.Supports GVRP. |
Multicast | Supports IGMP v1/v2/v3 snooping.Supports multicast load sharing among bundled ports.Supports port-based multicast rate limit and traffic statistics |
Operating Environment | Operating temperature: 0°C to 50°C (long term); –5°C to 55°C (short term); relative humidity: 10% to 90% (non-condensing) |
Port | twenty-four 10/100Base-TX ports and two gigabit Combo ports (10/100/1000Base-T or 100/1000Base-X) |
Port mirroring | Supports 1:1 or N:1 port mirroring.Supports Remote Switched Port Analyzer (RSPAN) and traffic-based mirroring.Supports packet forwarding on an observing port. |
Port switching capacity | 8.8 Gbit/s |
Power consumption | < 15.5 W |
Power supply | AC: Rated voltage: 100 V to 240 V, 50/60 Hz Maximum voltage: 90 V to 264 V, 50/60 Hz |
QoS | Supports port rate limit and traffic rate limit.Supports four queues with different priorities on each port.Supports mapping of packets to different queues based on 802.1p.Supports multiple algorithms including SP, WRR, and SP+WRR.Supports traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, Layer-4 port number, protocol type, VLAN ID, Ethernet frame protocol type, and CoS.Supports traffic-based priority marking and packet redirection. |
Security | Supports IEEE 802.1X authentication and the limit on the maximum number of users on a port.Supports dynamic ARP detection. Supports IP Source Guard.Supports multiple authentication methods including AAA, RADIUS, HWTACACS+, and NAC.Supports binding of the IP address, MAC address, port number, and VLAN ID. Support port rate limit. Supports port isolation, port security, and sticky MAC. Supports packet filtering.Supports packet filtering based on MAC addresses.Supports suppression of multicast, broadcast, and unknown single-cast packets. Supports limit on the number of MAC addresses to be learned.Supports CPU protection. |
Surge Protection | Each port has a surge protection capability of 7 kV. Each port has a surge protection capability of 15 kV after an extra surge protection device is added. |
VLAN Features | Supports IEEE 802.1Q (VLAN) and 4096 VLANs.Supports port-based VLAN.Supports MAC-based VLAN.Supports basic QinQ.Supports 1:1 VLAN switching.Supports N:1 VLAN switching. |
Weight | < 2.4 kg |
Теги: LS-S2326TP-EI-AC Huawei