+7 (812) 309 34 73. Договоримся!
The Huawei OpitX RTN 950A is a new generation integrated microwave transmission system developed by Huawei, which can be installed easily and configured flexibly. It supports the convergence of up to 12 radio links, and supports multiple protection schemes. The OptiX RTN 950A provides a generic platform for TDM/Hybrid/Packet/Routing microwave transmission. The platform provides various service interfaces, large bandwidth, and easy scalability. It provides a seamless microwave transmission solution for mobile communication network or private networks.
Quick Spec
Table 1 shows the quick spec.
|
Model |
Huawei OptiX RTN 950A |
|
Network Layer |
Access and Aggregation layer |
|
Frequency |
6 to 42 GHz |
|
Channel Spacing |
3.5/7/14/28/40/56/112 MHz |
|
Modulation Mode |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
|
Number of RF Directions |
12 |
|
Air-Interface Capacity |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
Product Details
Figure 1 shows the Application of Huawei OptiX RTN 950A.
The OptiX RTN 950A is located at a hub site to aggregate multiple microwave links, or an access site for large-capacity service backhaul.
Huawei OptiX RTN 950A provides these highlights:
· Supports a full spectrum of 6-42 GHz, a channel spacing of 3.5-112 MHz, and a modulation scheme of up to 4096QAM.
· Unified platform for TDM, Hybrid, Packet, and IP Routing services; provides various ports (E1/SDH/FE/GE/2.5GE/10GE) and up to 90 Gbit/s switching capacity.
· Provides an air-interface throughput of up to 2.5 Gbit/s per carrier.
· Provides AES-256 encryption and anti-theft to ensure high security.
· Supports MIMO and CA for future huge-capacity requirements.
· Supports unique four-layer Ethernet frame header compression to provide a large throughput for IP services.
· Provides a leading 13-grade hitless adaptive modulation technology to ensure high availability.
· Up to 12-channel enhanced physical link aggregation (EPLA) and load sharing for high-level granularity traffic.
· Supports the Super Dual Band (SDB) solution for TCO-optimized capacity expansion.
· Ethernet synchronization and full IEEE 1588 V2 (TC/OC/BC) provide high quality eLTE backhaul networks.
Easy Deployment and O&M
· The OptiX RTN 950A can be easily installed in any standard indoor or outdoor cabinet.
· A plug-and-play USB key can be used to achieve fast startup and service provisioning.
· The portable Web LCT can be used for NE-layer management, and the unified platform NCE can be used for complete network management.
Compare to Similar Item
Table 2 shows the comparison.
|
Model |
Huawei OptiX RTN 950 |
Huawei OptiX RTN 950A |
|
Network Layer |
Access and Aggregation layer |
Access and Aggregation layer |
|
Frequency |
6 to 42 GHz |
6 to 42 GHz |
|
Channel Spacing |
3.5/7/14/28/40/56/112 MHz |
3.5/7/14/28/40/56/112 MHz |
|
Modulation Mode |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
|
Number of RF Directions |
10 |
12 |
|
Air-Interface Capacity |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
Get More Information
Do you have any question about the Huawei OptiX RTN 950A?
Contact us now via Live Chat or info@itg-spb.ru.
Huawei OptiX RTN 950A Specification |
|
|
Network Layer |
Access and Aggregation layer |
|
Frequency |
6 to 42 GHz |
|
Channel Spacing |
3.5/7/14/28/40/56/112 MHz |
|
Modulation Mode |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
|
Number of RF Directions |
12 |
|
Air-Interface Capacity |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
|
Switching Capacity |
90 Gbit/s (CSHOF), 10 Gbit/s (CSHO) |
|
TDM Crossing |
32 × 32 VC-4 |
|
Interface Type |
E1, T1, STM-1 (e/o), FE (e/o), GE (e/o), 2.5GE (o), 10GE (o) |
|
RF Configuration Mode |
· N+0 · N × (1+0) · 1+1 · N+1 · XPIC · 2 × 2 CA · 4 × 4 MIMO |
|
Ethernet Function |
· Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding or deleting, and exchange VLAN tags (IEEE 802.1q/p) · ISIS, OSPF, BGP, RSVP, LDP · Flow control (IEEE 802.3x) · Link aggregation groups (IEEE 802.3ad LAG and L1 LAG) · RMON (IETF RFC 2819) |
|
Service Type |
· Native Ethernet services: E-Line service and E-LAN service · PW-carried Ethernet services: E-Line service, E-AGGR service, and E-LAN (VPLS) service (VPLS standing for virtual private LAN service) · L3VPN, L2VPN (VLL), CES, MCE |
|
Key Feature |
CES E1, IEEE 1588v2, H-QOS, PLA/EPLA, AES-256 encryption, Anti-theft, 1+1, N+1, XPIC, AM, TDM, PWE3/MPLS, SDB, L3VPN, CA, MIMO |
|
IDU Dimensions |
442 mm × 220 mm × 88 mm |
|
Environment |
Temperature: IDU -5°C to +60°C; ODU -33°C to +55°C Humidity: IDU 5% to 95%; ODU 5% to 100% |
|
Power |
-38.4V to -57.6V |
|
Typical Power Consumption |
125 W (1+0, ISM6) 228 W (1+1, ISM6) |
|
Certificate |
CE, RCM, FCC, IC, ETL, MCMC |
| Характеристики | |
| Air-Interface Capacity | 1166 to 2500 Mbit/s per carrier (none-XPIC) |
| Certificate | CE, RCM, FCC, IC, ETL, MCMC |
| Channel Spacing | 3.5/7/14/28/40/56/112 MHz |
| Environment | Temperature: IDU -5°C to +60°C; ODU -33°C to +55°CHumidity: IDU 5% to 95%; ODU 5% to 100% |
| Ethernet Function | · Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding or deleting, and exchange VLAN tags (IEEE 802.1q/p)· ISIS, OSPF, BGP, RSVP, LDP· Flow control (IEEE 802.3x)· Link aggregation groups (IEEE 802.3ad LAG and L1 LAG)· RMON (IETF RFC 2819) |
| Frequency | 6 to 42 GHz |
| IDU Dimensions | 442 mm × 220 mm × 88 mm |
| Interface Type | E1, T1, STM-1 (e/o), FE (e/o), GE (e/o), 2.5GE (o), 10GE (o) |
| Key Feature | CES E1, IEEE 1588v2, H-QOS, PLA/EPLA,AES-256 encryption, Anti-theft, 1+1, N+1, XPIC, AM, TDM, PWE3/MPLS,SDB, L3VPN, CA, MIMO |
| Modulation Mode | QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
| Network Layer | Access and Aggregation layer |
| Number of RF Directions | 12 |
| Power | -38.4V to -57.6V |
| RF configuration mode | · N+0· N × (1+0)· 1+1· N+1· XPIC· 2 × 2 CA· 4 × 4 MIMO |
| Service Type | · Native Ethernet services: E-Line service and E-LAN service· PW-carried Ethernet services: E-Line service, E-AGGR service, and E-LAN (VPLS) service (VPLS standing for virtual private LAN service)· L3VPN, L2VPN (VLL), CES, MCE |
| Switching capacity | 90 Gbit/s (CSHOF), 10 Gbit/s (CSHO) |
| TDM Crossing | 32 × 32 VC-4 |
| Typical power consumption | 125 W (1+0, ISM6)228 W (1+1, ISM6) |