Цена договорная
+7 (812) 309 34 73. Договоримся!
The Huawei OptiX RTN 910A is a new generation integrated microwave transmission system developed by Huawei, which can be installed easily and configured flexibly. It supports the convergence of up to 6 radio links, and supports multiple protection schemes. The OptiX RTN 910A provides a generic platform for TDM/Hybrid/Packet/Routing microwave transmission. The platform provides various service interfaces, large bandwidth, and easy scalability. It provides a seamless microwave transmission solution for mobile communication network or private networks
Quick Spec
Table 1 shows the quick spec.
|
Model |
Huawei OptiX RTN 910A |
|
Network Layer |
Access and Aggregation layer |
|
Frequency |
6 to 42 GHz |
|
Channel Spacing |
3.5/7/14/28/40/56/112 MHz |
|
Modulation Mode |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
|
Number of RF Directions |
6 |
|
Air-Interface Capacity |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
Product Details
Figure 1 shows the Application of Huawei OptiX RTN 910A.
The OptiX RTN 910A is located at a hub site to aggregate multiple microwave links, or an access site for large-capacity service backhaul.
Huawei OptiX RTN 910A provides these highlights:
·Supports a full spectrum of 6-42 GHz, a channel spacing of 3.5-112 MHz, and a modulation scheme of up to 4096QAM.
·Unified platform for TDM, Hybrid, Packet, and IP Routing services; provides various ports (E1/SDH/FE/GE/2.5GE/10GE) and up to 60 Gbit/s switching capacity.
·Provides an air-interface throughput of up to 2.5 Gbit/s per carrier.
·Provides AES-256 encryption and anti-theft to ensure high security.
·Supports unique four-layer Ethernet frame header compression to provide a large throughput for IP services.
·Provides a leading 13-grade hitless adaptive modulation technology to ensure high availability.
·Up to physical link aggregation (PLA/EPLA/EPLA+) and load sharing for high-level granularity traffic.
·Supports the Super Dual Band (SDB) solution for TCO-optimized capacity expansion.
·Supports CA, MIMO and L3VPN.
·Ethernet synchronization and full IEEE 1588 V2 (TC/OC/BC) provide high quality eLTE backhaul networks.
Easy Deployment and O&M
·The OptiX RTN 910A can be easily installed in any standard indoor or outdoor cabinet. A plug-and-play USB key can be used to achieve fast startup and service provisioning.
·The portable Web LCT can be used for NE-layer management, and the unified platform NCE can be used for complete network management.
Compare to Similar Item
Table 2 shows the comparison.
|
Model |
Huawei OptiX RTN 910A |
Huawei OptiX RTN 905 |
|
Network Layer |
Access and Aggregation layer |
Access layer |
|
Frequency |
6 to 42 GHz |
6 to 42 GHz |
|
Channel Spacing |
3.5/7/14/28/40/56/112 MHz |
3.5/7/14/28/40/56/112 MHz |
|
Modulation Mode |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
|
Number of RF Directions |
6 |
2 |
|
Air-Interface Capacity |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
Get More Information
Do you have any question about the Huawei OptiX RTN 910A?
Contact us now via Live Chat or info@itg-spb.ru.
Huawei OptiX RTN 910A Specification |
|
|
Network Layer |
Access and Aggregation layer |
|
Frequency |
6 to 42 GHz |
|
Channel Spacing |
3.5/7/14/28/40/56/112 MHz |
|
Modulation Mode |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
|
Number of RF Directions |
6 |
|
Air-Interface Capacity |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
|
Switching Capacity |
10 Gbit/s (CSHR) 60 Gbit/s (CSHRF) |
|
TDM Cross-connect Capacity |
8 × 8 VC-4 |
|
Interface Type |
CSHR: 4 × GE, 2 × FE/GE/2.5GE, 16 × E1 CSHRF: 2 × GE, 4 × 10GE/2.5GE/ GE, 1 × COMBO, 16 × E1 |
|
Configuration Mode |
·N+0 (N ≦ 6) ·N × (1+0) (N ≦ 6) ·1+1 ·N+1 (N ≦ 5) ·XPIC ·4×4 MIMO ·2CA |
|
Ethernet Function |
·Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding or deleting, and exchange VLAN tags (IEEE 802.1q/p) ·ISIS, OSPF, BGP, RSVP, LDP ·Flow control (IEEE 802.3x) ·Link aggregation groups (IEEE 802.3ad LAG and L1 LAG) ·RMON (IETF RFC 2819) |
|
Service Type |
·Native Ethernet services: E-Line service and E-LAN service ·PW-carried Ethernet services: E-Line service, E-AGGR service, and E-LAN (VPLS) service (VPLS standing for virtual private LAN service) ·L3VPN, L2VPN (VLL), CES, MCE |
|
Key Feature |
CES E1, IEEE 1588v2, H-QOS, PLA/EPLA/EPLA+, AES-256 encryption, Anti-theft, 1+1,N+1, XPIC, AM, TDM, PWE3/MPLS, L3VPN, SDB, CA, MIMO |
|
IDU Dimensions |
442 mm × 220 mm × 44 mm |
|
Environment |
Temperature: IDU -5°C to +60°C; ODU -33°C to +55°C Humidity: IDU 5% to 95%; ODU 5% to 100% |
|
Power |
-38.4 V to -57.6 V |
|
Typical Power Consumption |
CSHR： 89 W (2×(1+0)) CSHRF： 105.5 W (2×(1+0)) |
|
Certificate |
CE, RCM, FCC, IC, ETL, MCMC |
| Характеристики | |
| Air-Interface Capacity | 1166 to 2500 Mbit/s per carrier (none-XPIC) |
| Certificate | CE, RCM, FCC, IC, ETL, MCMC |
| Channel Spacing | 3.5/7/14/28/40/56/112 MHz |
| Configuration Mode | ·N+0 (N ≦ 6)·N × (1+0) (N ≦ 6)·1+1·N+1 (N ≦ 5)·XPIC·4×4 MIMO·2CA |
| Environment | Temperature: IDU -5°C to +60°C; ODU -33°C to +55°CHumidity: IDU 5% to 95%; ODU 5% to 100% |
| Ethernet Function | ·Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding or deleting, and exchange VLAN tags (IEEE 802.1q/p)·ISIS, OSPF, BGP, RSVP, LDP·Flow control (IEEE 802.3x)·Link aggregation groups (IEEE 802.3ad LAG and L1 LAG)·RMON (IETF RFC 2819) |
| Frequency | 6 to 42 GHz |
| IDU Dimensions | 442 mm × 220 mm × 44 mm |
| Interface Type | CSHR: 4 × GE, 2 × FE/GE/2.5GE, 16 × E1CSHRF: 2 × GE, 4 × 10GE/2.5GE/ GE, 1 × COMBO, 16 × E1 |
| Key Feature | CES E1, IEEE 1588v2, H-QOS, PLA/EPLA/EPLA+,AES-256 encryption, Anti-theft, 1+1,N+1, XPIC, AM, TDM,PWE3/MPLS, L3VPN, SDB, CA, MIMO |
| Modulation Mode | QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
| Network Layer | Access and Aggregation layer |
| Number of RF Directions | 6 |
| Power | -38.4 V to -57.6 V |
| Service Type | ·Native Ethernet services: E-Line service and E-LAN service·PW-carried Ethernet services: E-Line service, E-AGGR service, and E-LAN (VPLS) service (VPLS standing for virtual private LAN service)·L3VPN, L2VPN (VLL), CES, MCE |
| Switching capacity | 10 Gbit/s (CSHR)60 Gbit/s (CSHRF) |
| TDM Cross-connectCapacity | 8 × 8 VC-4 |
| Typical power consumption | CSHR： 89 W (2×(1+0))CSHRF： 105.5 W (2×(1+0)) |