+7 (812) 309 34 73. Договоримся!
The Huawei OptiX RTN 905 1E&2E&2F is a new generation integrated microwave transmission system developed by Huawei, which can be installed easily and configured flexibly. It supports one or two radio links, and supports multiple protection schemes. The OptiX RTN 905 1E&2E&2F provides a generic platform for TDM/Hybrid/Packet/Routing microwave transmission. These platforms provide various service interfaces, large bandwidth, and easy scalability. They provide a seamless microwave transmission solution for mobile communication network or private networks.
Quick Spec
Table 1 shows the quick spec.
Model |
OptiX RTN 905 1E&2E |
OptiX RTN 905 2F |
Network Layer |
Access layer |
Access layer |
Frequency |
6 to 42 GHz |
6 to 42 GHz |
Channel Spacing |
3.5/7/14/28/40/56 MHz |
3.5/7/14/28/40/56/112 MHz |
Modulation Mode |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
Number of RF Directions |
2 |
2 |
Air-Interface Capacity |
520 to 1000 Mbit/s per carrier (none-XPIC) |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
Product Details
Figure 1 shows the Application of Huawei OptiX RTN 905 1E&2E.
The OptiX RTN 905 1E&2E is located at an access site to access multi-service microwave links or for large-capacity service backhaul.
Figure 2 shows the Application of Huawei OptiX RTN 905 2F.
The OptiX RTN 905 2F is located at an access site to access multi-service microwave links or for large-capacity service backhaul.
Huawei OptiX RTN 905 provides these highlights:
·Supports a full spectrum of 6-42 GHz, a channel spacing of 3.5-112 MHz, and a modulation scheme of up to 4096 QAM.
·Unified platform for TDM, Hybrid, Packet, and Routing services; provides various ports (E1/SDH/FE/GE/2.5GE/10GE).
·Provides an air-interface throughput of up to 2.5 Gbit/s per carrier.
·Supports unique four-layer Ethernet frame header compression to provide a large throughput for IP services.
·Supports the Super Dual Band (SDB) solution for TCO-optimized capacity expansion.
·Provides a leading 13-grade hitless adaptive modulation technology to ensure high availability.
·Supports use of a web-based NMS. You can use it to manage a local or remote NE by entering the IP address of the NE on the address bar in a browser.
Easy Deployment and O&M
·OptiX RTN 905 1E&2E & 2F can be easily installed in any standard indoor or outdoor cabinet.
·A plug-and-play USB key can be used to achieve fast startup and service provisioning.
·The portable Web LCT can be used for NE-layer management, and the NCE can be used for complete network management.
Get More Information
Do you have any question about the Huawei OptiX RTN 905?
Contact us now via Live Chat or info@itg-spb.ru.
Huawei OptiX RTN 905 Specification |
||
Model |
OptiX RTN 905 1E&2E |
OptiX RTN 905 2F |
Network Layer |
Access layer |
Access layer |
Frequency |
6 to 42 GHz |
6 to 42 GHz |
Channel Spacing |
3.5/7/14/28/40/56 MHz |
3.5/7/14/28/40/56/112 MHz |
Modulation Mode |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM, 4096QAM |
Number of RF Directions |
2 |
2 |
Air-Interface Capacity |
520 to 1000 Mbit/s per carrier (none-XPIC) |
1166 to 2500 Mbit/s per carrier (none-XPIC) |
Switching Capacity |
8 Gbit/s |
60 Gbit/s |
TDM Cross-connect Capacity |
8 × 8 VC-4 |
8 × 8 VC-4 |
Interface Type |
E1, STM-1(e/o), FE(o), GE(e/o), 2.5GE(o) |
E1, STM-1(e/o), FE(o), GE(e/o), 2.5GE(o), 10GE(o) |
RF Configuration Mode |
• 2 × (1+0) • 2+0 • 1+1 • XPIC |
• 2 × (1+0) • 2+0 • 1+1 • 2CA • XPIC |
Ethernet Function |
• Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding or deleting, and exchange VLAN tags (IEEE 802.1q/p) • ISIS, OSPF, BGP, RSVP, LDP • Supports flow control (IEEE 802.3x) • Supports link aggregation groups (IEEE 802.3ad LAG and L1 LAG) • RMON (IETF RFC 2819) |
• Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding or deleting, and exchange VLAN tags (IEEE 802.1q/p) • Supports flow control (IEEE 802.3x) • Supports link aggregation groups (IEEE 802.3ad LAG and L1 LAG) • RMON (IETF RFC 2819) |
Service Type |
Native Ethernet services (E-Line service and E-LAN service) PW-carried Ethernet services, MPLS/PWE3, Native IP, Hierarchy VPN |
Native Ethernet services (E-Line service and E-LAN service) PW-carried Ethernet services, MPLS/PWE3, Hierarchy VPN |
Key Feature |
Sync Ethernet, PLA/EPLA, 1+1, XPIC, AM, TDM, PWE3/MPLS, SDB, L3VPN |
Sync. Ethernet, PLA/EPLA, 1+1, XPIC, AM, TDM, PWE3/MPLS, SDB, CA |
IDU Dimensions |
442 mm × 220 mm × 44 mm |
442 mm × 220 mm × 44 mm |
Environment |
Temperature: IDU -5°C to +60°C; ODU -33°C to +55°C Humidity: IDU 5% to 95%; ODU 5% to 100% |
Temperature: IDU -5°C to +60°C; ODU -33°C to +55°C Humidity: IDU 5% to 95%; ODU 5% to 100% |
Power |
-38.4V to -57.6V |
-38.4V to -57.6V |
Typical Power Consumption |
55 W (IDU 905 1E) 92 W (IDU 905 2E) |
88.8 W (1×IDU 905 2F + 2×XMC-3 ODU) |
Certificate |
CE, RCM, FCC, IC, ETL, MCMC |
CE, RCM, FCC, IC, ETL, MCMC |
Характеристики | |
-38.4V to -57.6V | Typical Power Consumption |
1166 to 2500 Mbit/s per carrier (none-XPIC) | Switching Capacity |
2 | 2 |
3.5/7/14/28/40/56 MHz | 3.5/7/14/28/40/56/112 MHz |
442 mm × 220 mm × 44 mm | Environment |
55 W (IDU 905 1E) 92 W (IDU 905 2E) | 88.8 W (1×IDU 905 2F + 2×XMC-3 ODU) |
6 to 42 GHz | Channel Spacing |
8 Gbit/s | 60 Gbit/s |
8 × 8 VC-4 | Interface Type |
Access layer | Access layer |
Air-Interface Capacity | 520 to 1000 Mbit/s per carrier (none-XPIC) |
Certificate | CE, RCM, FCC, IC, ETL, MCMC |
E1, STM-1(e/o), FE(o), GE(e/o), 2.5GE(o) | E1, STM-1(e/o), FE(o), GE(e/o), 2.5GE(o), 10GE(o) |
Frequency | 6 to 42 GHz |
IDU Dimensions | 442 mm × 220 mm × 44 mm |
Model | OptiX RTN 905 1E&2E |
Modulation Mode | QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 512QAM Light, 1024QAM, 1024QAM Light, 2048QAM |
Native Ethernet services (E-Line service and E-LAN service)PW-ca | Key Feature |
OptiX RTN 905 2F | Network Layer |
Power | -38.4V to -57.6V |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 25 | Number of RF Directions |
RF configuration mode | • 2 × (1+0)• 2+0• 1+1• XPIC |
Service Type | Native Ethernet services (E-Line service and E-LAN service)PW-carried Ethernet services, MPLS/PWE3, Native IP, Hierarchy VPN |
Sync Ethernet, PLA/EPLA, 1+1, XPIC, AM, TDM, PWE3/MPLS, SDB, L3V | Sync. Ethernet, PLA/EPLA, 1+1, XPIC, AM, TDM, PWE3/MPLS,SDB, CA |
TDM Cross-connectCapacity | 8 × 8 VC-4 |
Temperature: IDU -5°C to +60°C; ODU -33°C to +55°CHumidity: IDU | Temperature: IDU -5°C to +60°C; ODU -33°C to +55°CHumidity: IDU 5% to 95%; ODU 5% to 100% |
• 2 × (1+0)• 2+0• 1+1• 2CA• XPIC | Ethernet Function |
• Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format addi | • Ethernet ll, IEEE 802.3, and IEEE 802.1q/p service format adding ordeleting, and exchange VLAN tags (IEEE 802.1q/p)• Supports flow control (IEEE 802.3x)• Supports link aggregation groups (IEEE 802.3ad LAG and L1 LAG)• RMON (IETF RFC 2819) |