Цена договорная
+7 (812) 309 34 73. Договоримся!
The Huawei RTN 380 operates at 71–76/81–86 GHz frequency bands (E-band). Compared with common-band microwave devices (6–42 GHz), the RTN 380 features large capacity, low inter-site interference, and rich spectrum resources. The RTN 380 provides 4 Gbps microwave backhaul or aggregation links. It is mainly used for mobile backhaul, fixed-network backhaul, and enterprise private networks. It can also be used as a supplement to metro optical networks as well as for CPRI service backhaul between BBUs and RRUs.
Quick Spec
Table 1 shows the quick spec.
|
Model |
Huawei OptiX RTN 380 |
|
Microwave Type |
• IP microwave over Native Ethernet/PWE3 Ethernet • Microwave for transmitting CPRI services |
|
Frequency Band |
71–76/81–86 GHz |
|
Channel Spacing |
62.5 MHz, 125 MHz, 250 MHz, 500 MHz, 750 MHz |
|
Modulation Scheme |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM |
|
Capacity |
Air-interface capacity: 3.2 Gbps Air-interface throughput: 4 Gbps Switching capacity: 8 Gbps |
Product Details
Figure 1 shows the Huawei OptiX RTN 380 Application Scenarios.
Huawei OptiX RTN 380 provides these features:
(1) Ultra-High Bandwidth and High Spectral Efficiency
• Large capacity: provides 4 Gbps microwave links for sites.
• Large channel bandwidth: provides a channel bandwidth of up to 750 MHz.
• High modulation mode: provides a modulation scheme of up to 64QAM.
• Super Dual Band: works as a slave device to bond with the RTN 900 to provide the Super Dual Band solution. Through this solution, high-bandwidth, long distance, and highly-available backhaul links can be provided. In addition, through the Super Dual Band Relay solution, the transmission distance of E-band microwave links can be extended further.
• AMAC: supports adaptive modulation and adaptive channel bandwidth (AMAC) to ensures the transmission of high-priority services.
(2) Flexible Link Configuration and Full-Range Protection
• Link configuration: 1+0, 2+0, 2 x (1+0)
• Link-level protection: 1+1 HSB, PLA
• Service-level protection: LAG protection
• Network-level protection: ERPS, MSTP protection, MPLS tunnel 1:1 protection, PW 1:1 APS/FPS
(3) Easy Deployment & Maintenance
• Supports zero footprint installation, quick deployment, and easy maintenance.
• Supports connection to NEs at a site through WLAN, implementing contactless maintenance.
• Supports mobile APP-based service commissioning and configuration during site deployment, making operations convenient.
• Supports use of the NCE to implement E2E management, such as service deployment and real-time performance monitoring.
Compare to Similar Items
Table 2 shows the comparison.
|
Model |
Huawei OptiX RTN 320F |
Huawei OptiX RTN 380 |
|
Microwave Type |
IP microwave over Native Ethernet |
• IP microwave over Native Ethernet/PWE3 Ethernet • Microwave for transmitting CPRI services |
|
Frequency Band |
6-42 GHz |
71–76/81–86 GHz |
|
Channel Spacing |
ETSI: 7 MHz, 14 MHz, 28 MHz, 40 MHz, 56 MHz, 112 MHz FCC: 30 MHz, 40 MHz, 50 MHz |
62.5 MHz, 125 MHz, 250 MHz, 500 MHz, 750 MHz |
|
Modulation Scheme |
QPSK strong-4096QAM |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM |
|
Capacity |
Air-interface capacity: 2.24 Gbps (the total capacity of two channels) Air-interface throughput: 5 Gbps (the total capacity of two channels) Switching capacity: 60 Gbps |
Air-interface capacity: 3.2 Gbps Air-interface throughput: 4 Gbps Switching capacity: 8 Gbps |
Get More Information
Do you have any question about the Huawei OptiX RTN 380?
Contact us now via Live Chat or info@itg-spb.ru.
Huawei OptiX RTN 380 Specification |
|
|
Microwave Type |
• IP microwave over Native Ethernet/PWE3 Ethernet • Microwave for transmitting CPRI services |
|
Frequency Band |
71–76/81–86 GHz |
|
Channel Spacing |
62.5 MHz, 125 MHz, 250 MHz, 500 MHz, 750 MHz |
|
Modulation Scheme |
QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM |
|
Capacity |
Air-interface capacity: 3.2 Gbps Air-interface throughput: 4 Gbps Switching capacity: 8 Gbps |
|
RF configuration |
1+0, 2+0, 2 x (1+0), 1+1 HSB |
|
Port Type |
Auxiliary port: USB port, RSSI port, NMS port Service port: Two SFP ports (the COMBO port can be used as a CPRI port) One GE electrical port, one power over Ethernet (P&E) port |
|
Service Type |
• Native Ethernet services: E-Line, E-LAN • PW-based Ethernet services: E-Line, E-Aggr, E-LAN (VPLS) • CPRI services |
|
NMS |
NCE, Web LCT, SNMP, built-in web-based NMS |
|
ETH OAM |
IEEE 802.1ag, IEEE 802.3 ah, ITU-T Y.1731 |
|
Key Features |
AMAC, Super Dual Band, ATPC, Bandwidth Notification, PLA, ERPS, QoS/HQoS, TWAP Light, Anti-theft |
|
Clock Features |
• Supported clock sources: microwave link clock, synchronous Ethernet clock • IEEE 1588v2 time synchronization • ITU-T G.8275.1 time synchronization |
|
Power Supply Mode |
P&E, generally used in conjunction with the RTN PI |
|
Antenna |
• Dish antenna: 0.2 m, 0.3 m, 0.6 m • Panel antenna: 0.3 m • Wide-beam antenna: 0.3 m x 0.077 m |
|
Dimensions |
265 mm x 265 mm x 65 mm |
|
Typical Power Consumption |
39W |
|
Environment |
• Temperature: –33ºC to +55ºC • Humidity: 5% to 100% |
| Характеристики | |
| Antenna | • Dish antenna: 0.2 m, 0.3 m, 0.6 m• Panel antenna: 0.3 m• Wide-beam antenna: 0.3 m x 0.077 m |
| Capacity | Air-interface capacity: 3.2 GbpsAir-interface throughput: 4 GbpsSwitching capacity: 8 Gbps |
| Channel Spacing | 62.5 MHz, 125 MHz, 250 MHz, 500 MHz, 750 MHz |
| Clock Features | • Supported clock sources: microwave link clock, synchronousEthernet clock• IEEE 1588v2 time synchronization• ITU-T G.8275.1 time synchronization |
| Dimensions | 265 mm x 265 mm x 65 mm |
| Environment | • Temperature: –33ºC to +55ºC• Humidity: 5% to 100% |
| ETH OAM | IEEE 802.1ag, IEEE 802.3 ah, ITU-T Y.1731 |
| Frequency Band | 71–76/81–86 GHz |
| Key Features | AMAC, Super Dual Band, ATPC, Bandwidth Notification, PLA, ERPS, QoS/HQoS, TWAP Light, Anti-theft |
| Microwave type | • IP microwave over Native Ethernet/PWE3 Ethernet• Microwave for transmitting CPRI services |
| Modulation scheme | QPSK Strong, QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM |
| NMS | NCE, Web LCT, SNMP, built-in web-based NMS |
| Port Type | Auxiliary port: USB port, RSSI port, NMS portService port:Two SFP ports (the COMBO port can be used as a CPRI port)One GE electrical port, one power over Ethernet (P&E) port |
| Power Supply Mode | P&E, generally used in conjunction with the RTN PI |
| RF configuration | 1+0, 2+0, 2 x (1+0), 1+1 HSB |
| Service Type | • Native Ethernet services: E-Line, E-LAN• PW-based Ethernet services: E-Line, E-Aggr, E-LAN (VPLS)• CPRI services |
| Typical power consumption | 39W |