36 467.02 Рубль
+7 (812) 309 34 73. Договоримся!
The H80BADPE board is a 64-port ADSL2+ over POTS service board. Using its ADSL2+ port, the H80BADPE board works with the ADSL terminal unit-remote end (ATU-R) to provide 64-channel ADSL2+ services.
Quick Spec
Table 1 shows the quick spec.
|
Model |
H80BADPE |
|
Connector |
Delander 64-pin |
|
Built-in splitter |
600 ohms |
|
Maximum frame size |
1800 bytes |
|
Annex |
• G.992.1 Annex A • G.992.3 Annex A/L/M • G.992.5 Annex A/M • G.993.2 Annex A/B |
|
Bonding |
2 pairs |
|
SRA |
Supported |
|
RFI notch |
Supported |
Product Details
H80BADPE provides these benefits:
· High density ADSL2+board, supporting a maximum of 64 ports
· Supports built-in splitters
H80BADPE provides these external interfaces:
· 32x2 PSTN lines
· 32x2 ADSL2+ lines
- G.992.1 (ADSL)
- G.992.3 (ADSL2)
- G.992.5 (ADSL2+)
- G.997.1 (For Consent)
- G.998.1 (ATM-based multi-pair bonding)
- G.998.4 (For Approval)
- BF TR-159 (Management Framework for xDSL Bonding)
Compare to Similar Items
Table 2 shows the comparison.
|
Model |
H807ADPD |
H80BADPE |
|
Connector |
Champ 64-pin |
Delander 64-pin |
|
Built-in splitter |
Not supported |
600 ohms |
|
Maximum frame size |
1800 bytes |
1800 bytes |
|
Annex |
• G.992.1 Annex A |
• G.992.1 Annex A • G.992.3 Annex A/L/M • G.992.5 Annex A/M • G.993.2 Annex A/B |
|
Bonding |
2 pairs |
2 pairs |
|
SRA |
Supported |
Supported |
|
RFI notch |
Supported |
Supported |
|
Power consumption |
• Static: 20 W • Maximum: 41 W |
|
Get More Information
Do you have any question about the H80BADPE?
Contact us now via Live Chat or info@itg-spb.ru.
H80BADPE Specification |
|
|
Connector |
Delander 64-pin |
|
Built-in splitter |
600 ohms |
|
Maximum frame size |
1800 bytes |
|
Operating temperature |
-40° C to +65° C |
|
Power consumption |
• Static: 12.4 W |
|
Annex |
• G.992.1 Annex A |
|
Bonding |
2 pairs |
|
SRA |
Supported |
|
RFI notch |
Supported |
|
G.INP |
Supported |
|
INM |
Supported |
|
Built-in MELT |
Not supported |
|
Built-in SELT |
Supported |
|
IPv6 |
Supported |
|
N:1 VMAC |
Supported |
|
1:1 VMAC |
Supported |
|
DPBO |
Supported |
| Характеристики | |
| 1:1 VMAC | Supported |
| Annex | • G.992.1 Annex A • G.992.3 Annex A/L/M • G.992.5 Annex A/M • G.993.2 Annex A/B |
| Bonding | 2 pairs |
| Built-in MELT | Not supported |
| Built-in SELT | Supported |
| Built-in splitter | 600 ohms |
| Connector | Delander 64-pin |
| DPBO | Supported |
| G.INP | Supported |
| INM | Supported |
| IPv6 | Supported |
| Maximum frame size | 1800 bytes |
| N:1 VMAC | Supported |
| Operating Temperature | -40° C to +65° C |
| Power consumption | • Static: 12.4 W • Maximum: 56.8 W |
| RFI notch | Supported |
| SRA | Supported |
Теги: H80BADPE Huawei