+7 (812) 309 34 73. Договоримся!
MA5621A is the The SmartAX MA5621A Multi-service Access Module (the MA5621A) is a multi-dwelling unit (MDU). The MA5621A applies to wireless local area network (WLAN) scenarios and video monitoring scenarios.
Quick Spec
Table 1 shows the quick spec.
|
Model |
MA5621A |
|
Dimensions (WxDxH) |
250 mm x 180 mm x 43.6 mm (without the mounting brackets) 290 mm x 180 mm x 43.6 mm (with the short mounting brackets) 482.6 mm x 180mm x 43.6 mm (with the 19–inch mounting brackets) |
|
Power supply mode |
220 V AC power |
|
Working voltage range |
90-264 V AC |
|
Power Consumption |
< 12 W |
|
System switching capacity |
12 Gbit/s |
|
System packet forwarding rate |
18 packets per second (Mpps) |
|
Uplink ports provided on a daughter board |
Provides one GPON uplink port. |
|
User ports |
· Four FE electrical ports · Two RS485 serial ports |
Product Details
Huawei MA5621 provides these highlights:
★ One-Site-Visit Deployment and Plug and Play
· Performing offline deployment and plug and play. The hardware installation engineer can perform one-site-visit deployment for the MA5621A.
· Automatically obtaining the configuration data from the network management system (NMS) (The configuration data automatically takes effect.) and reporting its online status to the NMS.
★ Remote Batch Upgrade
· Supporting automatic batch upgrade. After the upgrading policies are defined on the NMS, the NMS automatically upgrades network elements (NEs) in batches at a specified time.
· Automatically performing a rollback operation to restore the original version and data if the upgrading fails, ensuring the system security.
· Providing an upgrade package combining both the device software and the patch file.
★ Zero Touch Routine Maintenance
· Accurate fault location
– Fast Ethernet (FE) port loopback detectionRing check.
– Ethernet connectivity fault management (CFM) operation, administration and maintenance (OAM) (IEEE Std 802.1ag), implementing the Ethernet monitoring and fault diagnosing. IEEE is the acronym for Institute of Electrical and Electronics Engineers.
– Ethernet in the First Mile (EFM) OAM (IEEE Std 802.3ah), implementing Ethernet link monitoring.
· Remote troubleshooting
– Remote maintenance, reducing the operational expenditure (OPEX)
– Remote patch installation in batches
– Over-temperature protection
– Self-healing function (automatic reset upon the exhaustion of system dynamic resources)
– Remote reset of the system
· Comprehensive information collection
– Configuration data backup and upload
– Accurate operation log obtaining
· Self-check and diagnosis of the device
– Loss of signal (LOS) alarm and dying gasp alarm, identifying the disconnection of the ONU caused by broken optical fiber or power-off (Dying gasp: The system detects the output of the ONU power module. If the voltage drops and is lower than the threshold, the system generates an alarm.)
★ Network Performance Monitoring
· Network monitoring: The system monitors the traffic on the network side periodically. If traffic bottleneck occurs, the system adjusts the network resources.
· User monitoring: The system performs selective monitoring on the traffic of user ports to find abnormal traffic and unauthorized users.
Get More Information
Do you have any question about the MA5621A?
Contact us now via Live Chat or info@itg-spb.ru.
MA5621A Specification |
|
|
Dimensions (WxDxH) |
250 mm x 180 mm x 43.6 mm (without the mounting brackets) 290 mm x 180 mm x 43.6 mm (with the short mounting brackets) 482.6 mm x 180mm x 43.6 mm (with the 19–inch mounting brackets) |
|
Working environment temperature |
-40°C to +55°C The MA5621A can start at a lowest temperature of -25°C, operate in the normal state at a lowest temperature of -40°C. |
|
Working environment humidity |
5% RH to 95% RH |
|
Atmospheric pressure |
70 kPa to 106 kPa |
|
Altitude |
Below 4000 m |
|
Power supply mode |
220 V AC power |
|
Working voltage range |
90-264 V AC |
|
Power Consumption |
< 12 W |
|
System switching capacity |
12 Gbit/s |
|
System packet forwarding rate |
18 packets per second (Mpps) |
|
Uplink ports provided on a daughter board |
Provides one GPON uplink port. |
|
User ports |
· Four FE electrical ports · Two RS485 serial ports |
| Характеристики | |
| Altitude | Below 4000 m |
| Atmospheric pressure | 70 kPa to 106 kPa |
| Dimensions (WxDxH) | 250 mm x 180 mm x 43.6 mm (without the mounting brackets)290 mm x 180 mm x 43.6 mm (with the short mounting brackets)482.6 mm x 180mm x 43.6 mm (with the 19–inch mounting brackets) |
| Power consumption | < 12 W |
| Power Supply Mode | 220 V AC power |
| System packet forwarding rate | 18 packets per second (Mpps) |
| System Switching Capacity | 12 Gbit/s |
| Uplink ports provided on a daughter board | Provides one GPON uplink port. |
| User ports | · Four FE electrical ports· Two RS485 serial ports |
| Working environment humidity | 5% RH to 95% RH |
| Working environment temperature | -40°C to +55°CThe MA5621A can start at a lowest temperature of -25°C, operate in the normal state at a lowest temperature of -40°C. |
| Working Voltage Range | 90-264 V AC |
Теги: MA5621A Huawei