+7 (812) 309 34 73. Договоримся!
The H83DCSME board is a 48-port SuperVector & POTS combo board with the highest density in the industry, providing 48 channels of SuperVector and POTS access services and supporting vectoring.
Quick Spec
Table 1 shows the quick spec.
|
Model |
H83DCSME |
|
Connector |
Champ 64-pin |
|
Built-in splitter |
600 ohms |
|
Maximum frame size |
PTM: 1919 bytes ATM: 2000 bytes |
Product Details
H83DCSME provides these benefits:
· Support SuperVector
- Featuring fast rate improvement
- Short time to market (TTM)
- Fast return on investment (ROI)
· High precision of MELT for POTS lines
· Three-in-one solution
- Be suitable for scenarios requiring voice and broadband services
· CAPEX and OPEX decrease
- Fewer devices
- Easier engineering
- Less occupied MDF area (reduce 2/3 MDF space)
- Fewer board types and spare parts
- Easier maintenance
H83DCSME provides these external interfaces:
· 2x24 VDSL2 lines
- G.993.2 (VDSL2 over POTS)
- G.997.1 (physical layer management)
- G.998.2 (Ethernet-based multi-pair bonding)
- G.998.4 (INP for DSL)
- G.994.1 (handshake procedures)
- BF TR-129 (protocol-independent management model)
- BF TR-159 (management framework for xDSL bonding)
Compare to Similar Item
Table 2 shows the comparison.
|
Model |
H83BCVLE |
H83BVDLE |
H83DCSME |
|
Connector |
Champ 64-pin |
Champ 64-pin |
Champ 64-pin |
|
Built-in splitter |
600 ohms |
600 ohms |
600 ohms |
|
Maximum frame size |
PTM: 2000 bytes ATM: 1800 bytes |
2000 bytes |
PTM: 1919 bytes ATM: 2000 bytes |
Get More Information
Do you have any question about the H83DCSME?
Contact us now via Live Chat or info@itg-spb.ru.
H83DCSME Specification |
|
|
Connector |
Champ 64-pin |
|
Built-in splitter |
600 ohms |
|
Maximum Frame Size |
PTM: 1919 bytes |
|
Codec |
G.711A |
|
Polarity of wires a and b |
a+ b |
|
Short loop |
Supported |
|
Polarity reversal |
Supported |
|
16/12 KC |
Not supported |
|
MELT |
Supported |
|
Port current |
20 mA / 25 mA / 30 mA |
|
MELT precision |
High |
|
SuperVector |
Supported |
|
Annex |
G.992.1 (Annex A) |
|
Profile |
8a/8b/8c/8d/12a/12b/17a/35b |
|
Bonding |
Supports the bonding of any four |
|
SRA |
Supported |
|
RFI notch |
Supported |
|
UPBO |
Supported |
|
DPBO |
Supported |
|
G.INP |
Supported |
|
INM |
Supported |
|
Virtual noise |
Supported |
|
SELT |
Supported |
|
MELT |
Supported |
|
Operating temperature |
-40° C to +65° C |
|
Power consumption (the convergence ration is 25%.) |
For 8b profiles: For 17a profiles: For 35b profiles: |
|
Automatic shutdown at high temperature |
Supported |
|
Powering on/off by CLI |
Supported |
| Характеристики | |
| 16/12 KC | Not supported |
| Annex | G.992.1 (Annex A) G.992.3 (Annex A/L/M) G.992.5 (Annex A/M) G.993.2 (Annex B) |
| Automatic shutdown at high temperature | Supported |
| Bonding | Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. |
| Built-in splitter | 600 ohms |
| Codec | G.711A G.711U G.729 G.723.1 G.726 |
| Connector | Champ 64-pin |
| DPBO | Supported |
| G.INP | Supported |
| INM | Supported |
| Maximum frame size | PTM: 1919 bytes ATM: 2000 bytes |
| MELT | Supported |
| MELT precision | High |
| Operating Temperature | -40° C to +65° C |
| Polarity of wires a and b | a+ b |
| Polarity reversal | Supported |
| Port current | 20 mA / 25 mA / 30 mA |
| Power consumption (the convergence ration is 25%.) | For 8b profiles: • Static: 23 W •Typical: 45 W • Maximum: 81 WFor 17a profiles: • Static: 23 W •Typical : 45 W • Maximum: 82 WFor 35b profiles: • Static: 23 W •Typical: 46 W • Maximum: 85 W |
| Powering on/off by CLI | Supported |
| Profile | 8a/8b/8c/8d/12a/12b/17a/35b |
| RFI notch | Supported |
| SELT | Supported |
| Short loop | Supported |
| SRA | Supported |
| SuperVector | Supported |
| UPBO | Supported |
| Virtual noise | Supported |
Теги: H83DCSME Huawei