Huawei H83BVDLE

H83BVDLE

Производитель: Huawei

Код товара: H83BVDLE - Huawei SmartAX MA5616 Service Boards

0 отзывов

Артикул:

По запросу

Сроки: 14 дней

Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

H83BVDLE is a 32-channel VDSL2 over POTS service board. It supports 600-ohm built-in splitter.

Table 1 shows the quick spec.

H83BVDLE provides these benefits:

· Supports the upstream port rate of 3 Gbit/s.

· Supports board power-off for energy conservation.

H83BVDLE provides these external interfaces:

· 32 POTs Lines

· 32 VDSL2 Lines:

- G.993.2 (VDSL2 over POTS)

- G.997.1 (physical layer management)

- G.998.2 (Ethernet-based multi-pair bonding)

- G.998.4 (INP for DSL)

- G.994.1 (handshake procedures)

- BF TR-129 (protocol-independent management model)

- BF TR-159 (management framework for xDSL bonding)

Table 2 shows the comparison.

Do you have any question about the H83BVDLE?

H83BVDLE Specification
Connector	Champ 64-pin
Built-in splitter	600 ohms
Maximum frame size	2000 bytes
Operating temperature	-40° C to +65° C
Power consumption	For 17a profiles: • Static: 10 W •Typical: 20 W • Maximum: 32 W For 8b profiles: • Static: 10 W •Typical: 21 W • Maximum: 36 W
Automatic shutdown at high temperature	Supported
Power-on and power-off through the CLI	Supported
Category	Specifications
Annex	G.992.1 (Annex A) G.992.3 (Annex A/L/M) G.992.5 (Annex A/M) G.993.2 (Annex A/B)
Profile	8a/8b/8c/8d/12a/12b/17a
Vectoring	Not supported
Bonding	Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694.
SRA	Supported
RFI notching	Supported
UPBO	Supported
DPBO	Supported
G.INP	Supported
INM	Supported
Virtual noise	Supported
Built-in MELT	Not supported
Built-in SELT	Supported
IPv6	Supported
1:1 VMAC	Supported

Характеристики
1:1 VMAC	Supported
Annex	G.992.1 (Annex A) G.992.3 (Annex A/L/M) G.992.5 (Annex A/M) G.993.2 (Annex A/B)
Automatic shutdown at high temperature	Supported
Bonding	Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694.
Built-in MELT	Not supported
Built-in SELT	Supported
Built-in splitter	600 ohms
Category	Specifications
Connector	Champ 64-pin
DPBO	Supported
G.INP	Supported
INM	Supported
IPv6	Supported
Maximum frame size	2000 bytes
Operating Temperature	-40° C to +65° C
Power consumption	For 17a profiles: • Static: 10 W •Typical: 20 W • Maximum: 32 WFor 8b profiles: • Static: 10 W •Typical: 21 W • Maximum: 36 W
Power-on and power-off through the CLI	Supported
Profile	8a/8b/8c/8d/12a/12b/17a
RFI notching	Supported
SRA	Supported
UPBO	Supported
Vectoring	Not supported
Virtual noise	Supported

Написать отзыв