Huawei H83BVCLE

H83BVCLE

Производитель: Huawei

Код товара: H83BVCLE - Huawei SmartAX MA5616 Service Boards

0 отзывов

Артикул:

По запросу

Сроки: 14 дней

Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

The H83BVCLE board is a 32-channel VDSL2 over POTS vectoring service board, supporting 600-ohm built-in splitters.

Table 1 shows the quick spec.

H83BVCLE provides these benefits:

· Supports vectoring using a vectoring processing board.

· Provides an upstream transmission rate of 3 Gbit/s.

· Supports board power shutdown.

H83BVCLE provides these external interfaces:

· 32 POTs ports

· 32 VDSL2 lines & POTS

- G.993.2 (VDSL2 over POTS)

- G.997.1 (physical layer management)

- G.998.2 (Ethernet-based multi-pair bonding)

- G.998.4 (INP for DSL)

- G.994.1 (handshake procedures)

- BF TR-165 (vectoring profiles)

- BF TR-129 (protocol-independent management model)

- BF TR-159 (management framework for xDSL bonding)

Table 2 shows the comparison.

Do you have any question about the H83BVCLE?

H83BVCLE Specification
Connector	Champ 64-pin
Built-in splitter	600 ohms
Bandwidth	3 Gbit/s
Maximum frame size	2000 bytes
Operating temperature	-40°C to +65°C
Power consumption	For 17a profiles: • Static: 20 W • Typical: 41 W • Maximum: 47 W For 12a profiles: • Static: 19 W • Typical: 43 W • Maximum: 44 W For 8b profiles: • Static: 19 W • Typical: NA • Maximum: 48 W
Automatic shutdown at a high temperature	Supported
Power-on and power off through the CLI	Supported
Annex	G.992.1 (Annex A/B) G.992.3 (Annex A/B/L/M) G.992.5 (Annex A/B/M) G.993.2 (Annex A/B)
Profile	8a, 8b, 8c, 8d, 12a, 12b, or 17a
Vectoring	Supported
Bonding	Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694.
SRA	Supported
RFI notch	Supported
UPBO	Supported
DPBO	Supported
G.INP	Supported
INM	Supported
Virtual noise	Supported
Built-in MELT	Not supported
Built-in SELT	Supported
IPv6	Supported
1:1 VMAC	Supported

Характеристики
1:1 VMAC	Supported
Annex	G.992.1 (Annex A/B) G.992.3 (Annex A/B/L/M) G.992.5 (Annex A/B/M) G.993.2 (Annex A/B)
Automatic shutdown at a high temperature	Supported
Bandwidth	3 Gbit/s
Bonding	Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694.
Built-in MELT	Not supported
Built-in SELT	Supported
Built-in splitter	600 ohms
Connector	Champ 64-pin
DPBO	Supported
G.INP	Supported
INM	Supported
IPv6	Supported
Maximum frame size	2000 bytes
Operating Temperature	-40°C to +65°C
Power consumption	For 17a profiles: • Static: 20 W • Typical: 41 W • Maximum: 47 WFor 12a profiles: • Static: 19 W • Typical: 43 W • Maximum: 44 WFor 8b profiles: • Static: 19 W • Typical: NA • Maximum: 48 W
Power-on and power off through the CLI	Supported
Profile	8a, 8b, 8c, 8d, 12a, 12b, or 17a
RFI notch	Supported
SRA	Supported
UPBO	Supported
Vectoring	Supported
Virtual noise	Supported

Написать отзыв