Huawei H836VCLE

H836VCLE

Производитель: Huawei

Код товара: H836VCLE - Huawei SmartAX MA5616 Service Boards

0 отзывов

Артикул:

По запросу

Сроки: 14 дней

Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

The H836VCLE board is a 32-channel VDSL2 over POTS service board, supporting 600-ohm built-in splitters.

Table 1 shows the quick spec.

H836VCLE provides these benefits:

· Provides an upstream transmission rate of 3 Gbit/s.

· Supports port protection.

· Supports board power shutdown.

H836VCLE provides these external interfaces:

· 32 POTs ports

· 32 VDSL2 ports:

- G.993.2 (VDSL2 over POTS)

- G.997.1 (physical layer management)

- G.998.2 (Ethernet-based multi-pair bonding)

- G.998.4 (INP for DSL)

- G.994.1 (handshake procedures)

- BF TR-129 (protocol-independent management model)

- BF TR-159 (management framework for xDSL bonding)

Table 2 shows the comparison.

Model	H836VCLE	H835VDTH	H836ADPE
Connector	Champ 64-pin	Champ 64-pin	Delander 64-pin
Built-in splitter	600 ohms	None	600 ohms
Maximum frame size	1900 bytes (CCUB) 2000 bytes (CCUE)	PTM: 1600 bytes ATM: 1800 bytes	2000 byes (using CCUC, CCUD, and CCUE) 1900 byes (using with CCUB)

Do you have any question about the H836VCLE?

H836VCLE Specification
Connector	Champ 64-pin
Built-in splitter	600 ohms
Bandwidth	3 Git/s (CCUE or CCUD) 600 Mbit/s (CCUB)
Maximum frame size	1900 bytes (CCUB) 2000 bytes (CCUE)
Operating temperature	-40°C to +65°C
Power consumption	For 12a/17a profiles: • Static: 15 W •Typical : 25 W • Maximum: 34 W For 8b profiles: • Static: 15 W •Typical: 27 W • Maximum: 37 W
Automatic shutdown at a high temperature	Supported
Power-on or power off through the CLI	Supported
Annex	G.992.1 (Annex A) G.992.3 (Annex A/L/M) G.992.5 (Annex A/M) G.993.2 (Annex A)
Profile	8a, 8b, 8c, 8d, 12a, 12b, or 17a
Bonding	Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694.
SRA	Supported
RFI notch	Supported
UPBO	Supported
DPBO	Supported
G.INP	Supported
INM	Supported
Virtual noise	Supported
Built-in MELT	Not supported
Built-in SELT	Supported
IPv6	Supported (Not supported when CCUB is used.)
1:1 VMAC	Supported

Характеристики
1:1 VMAC	Supported
Annex	G.992.1 (Annex A) G.992.3 (Annex A/L/M) G.992.5 (Annex A/M) G.993.2 (Annex A)
Automatic shutdown at a high temperature	Supported
Bandwidth	3 Git/s (CCUE or CCUD) 600 Mbit/s (CCUB)
Bonding	Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694.
Built-in MELT	Not supported
Built-in SELT	Supported
Built-in splitter	600 ohms
Connector	Champ 64-pin
DPBO	Supported
G.INP	Supported
INM	Supported
IPv6	Supported (Not supported when CCUB is used.)
Maximum frame size	1900 bytes (CCUB) 2000 bytes (CCUE)
Operating Temperature	-40°C to +65°C
Power consumption	For 12a/17a profiles: • Static: 15 W •Typical : 25 W • Maximum: 34 WFor 8b profiles: • Static: 15 W •Typical: 27 W • Maximum: 37 W
Power-on or power off through the CLI	Supported
Profile	8a, 8b, 8c, 8d, 12a, 12b, or 17a
RFI notch	Supported
SRA	Supported
UPBO	Supported
Virtual noise	Supported

Написать отзыв