+7 (812) 309 34 73. Договоримся!
H836ADPE is a 64-channel ADSL2+ over POTS service board. It has a 600-ohm built-in splitter and works together with the ADSL terminal unit-remote end (ATU-R) to provide 64-channel ADSL2 access through the ADSL2+ port.
Quick Spec
Table 1 shows the quick spec.
|
Model |
H836ADPE |
|
Connector |
Delander 64-pin |
|
Built-in splitter |
600 ohms |
|
Maximum frame size |
2000 byes (using CCUC, CCUD, and CCUE) 1900 byes (using with CCUB) |
Product Details
H836ADPE provides these benefits:
· Supports 64-port access.
· Supports single ended loop testing (SELT).
· Supports board power-off for energy conservation.
· Supports lower power consumption.
H836ADPE provides these external interfaces:
· 64 POTs Lines
· 64 ADSL2+ Lines:
- G.992.1 (ADSL)
- G.992.3 (ADSL2)
- G.992.5 (ADSL2+)
- G.997.1 (For Consent)
Compare to Similar Item
Table 2 shows the comparison.
|
Model |
H835VDGE |
H835VDTH |
H836ADPE |
|
Connector |
Champ 64-pin |
Champ 64-pin |
Delander 64-pin |
|
Built-in splitter |
600 ohms |
None |
600 ohms |
|
Maximum frame size |
PTM: 1600 bytes ATM: 1800 bytes |
PTM: 1600 bytes ATM: 1800 bytes |
2000 byes (using CCUC, CCUD, and CCUE) 1900 byes (using with CCUB) |
Get More Information
Do you have any question about the H836ADPE?
Contact us now via Live Chat or info@itg-spb.ru.
H836ADPE Specification |
|
|
Connector |
Delander 64-pin |
|
Built-in splitter |
600 ohms |
|
Maximum frame size |
2000 byes (using CCUC, CCUD, and CCUE) |
|
Operating temperature |
-40° C to +65° C |
|
Power consumption |
Static: 12 W |
|
Automatic shutdown at high temperature |
Supported |
|
Power-on and power-off through the CLI |
Supported |
|
Annex |
G.992.1 Annex A |
|
Bonding |
Not supported |
|
SRA |
Supported |
|
RFI notching |
Not supported |
|
G.INP |
Not supported |
|
INM |
Not supported |
|
Built-in MELT |
Not supported |
|
Built-in SELT |
Supported |
|
IPv6 |
Supported (not supported using with CCUB) |
|
1:1 VMAC |
Supported |
|
DPBO |
Not supported |
| Характеристики | |
| 1:1 VMAC | Supported |
| Annex | G.992.1 Annex A G.992.3 Annex A/L/M G.992.5 Annex A/M |
| Automatic shutdown at high temperature | Supported |
| Bonding | Not supported |
| Built-in MELT | Not supported |
| Built-in SELT | Supported |
| Built-in splitter | 600 ohms |
| Connector | Delander 64-pin |
| DPBO | Not supported |
| G.INP | Not supported |
| INM | Not supported |
| IPv6 | Supported (not supported using with CCUB) |
| Maximum frame size | 2000 byes (using CCUC, CCUD, and CCUE) 1900 byes (using with CCUB) |
| Operating Temperature | -40° C to +65° C |
| Power consumption | Static: 12 W Typical: 32 W Maximum: 51 W |
| Power-on and power-off through the CLI | Supported |
| RFI notching | Not supported |
| SRA | Supported |
Теги: H836ADPE Huawei