+7 (812) 309 34 73. Договоримся!
H835VDTH is a 24-channel VDSL2 over ISDN service board. It provides the VDSL2 over ISDN access service. It does not have an embedded splitter.
Quick Spec
Table 1 shows the quick spec.
|
Model |
H835VDTH |
|
Connector |
Champ 64-pin |
|
Built-in splitter |
None |
|
Maximum frame size |
PTM: 1600 bytes ATM: 1800 bytes |
Product Details
H835VDTH provides these benefits:
· Supports single-ended loop tests (SELTs).
· Supports board power shutdown.
H835VDTH provides these external interfaces:
· 24 VDSL2 lines:
- G.993.2 (VDSL2 over ISDN)
- G.997.1 (physical layer management)
- G.998.2 (Ethernet-based multipair bonding)
- G.998.4 (INP for DSL)
- G.994.1 (handshake procedures)
- BF TR-165 (vector of profiles)
- BF TR-129 (protocol-independent management model)
- BF TR-159 (management framework for xDSL bonding)
Compare to Similar Item
Table 2 shows the comparison.
|
Model |
H835ADLE |
H835VDGE |
H835VDTH |
|
Connector |
Champ 64-pin |
Champ 64-pin |
Champ 64-pin |
|
Built-in splitter |
600 ohms |
600 ohms |
None |
|
Maximum frame size |
2000 bytes (CCUC, or CCUE) 1900 bytes (with CCUB) |
PTM: 1600 bytes ATM: 1800 bytes |
PTM: 1600 bytes ATM: 1800 bytes |
Get More Information
Do you have any question about the H835VDTH?
Contact us now via Live Chat or info@itg-spb.ru.
H835VDTH Specification |
|
|
Connector |
Champ 64-pin |
|
Built-in splitter |
None |
|
Bandwidth |
800 Mbit/s |
|
Maximum Frame Size |
PTM: 1600 bytes |
|
Operating temperature |
-40° C to +65° C |
|
Power consumption |
For 17a profile: For 8b profile: |
|
High temperature automatic shutdown |
Supported |
|
Powering on/off by CLI |
Supported |
|
Annex |
G.992.1 (Annex B) |
|
Profile |
8a/8b/8c/8d/12a/12b/17a |
|
Vectoring |
Not supported |
|
Bonding |
Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694. |
|
SRA |
Supported |
|
RFI notch |
Supported |
|
UPBO |
Supported |
|
DPBO |
Supported |
|
G.INP |
Supported |
|
INM |
Supported |
|
Virtual noise |
Supported |
|
Built-in MELT |
Not supported |
|
Built-in SELT |
Supported |
|
IPv6 |
Supported |
|
N:1 VMAC |
Supported |
|
1:1 VMAC |
Supported |
| Характеристики | |
| 1:1 VMAC | Supported |
| Annex | G.992.1 (Annex B) G.992.3 (Annex B) G.992.5 (Annex B) G.993.2 (Annex A/B) |
| Bandwidth | 800 Mbit/s |
| Bonding | Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694. |
| Built-in MELT | Not supported |
| Built-in SELT | Supported |
| Built-in splitter | None |
| Connector | Champ 64-pin |
| DPBO | Supported |
| G.INP | Supported |
| High temperature automatic shutdown | Supported |
| INM | Supported |
| IPv6 | Supported |
| Maximum frame size | PTM: 1600 bytes ATM: 1800 bytes |
| N:1 VMAC | Supported |
| Operating Temperature | -40° C to +65° C |
| Power consumption | For 17a profile: • Static: 20 W • Typical: 28 W • Maximum:40 WFor 8b profile: • Static: 20 W • Typical: 30 W • Maximum:43 W |
| Powering on/off by CLI | Supported |
| Profile | 8a/8b/8c/8d/12a/12b/17a |
| RFI notch | Supported |
| SRA | Supported |
| UPBO | Supported |
| Vectoring | Not supported |
| Virtual noise | Supported |
Теги: H835VDTH Huawei