Huawei H835VDGE

H835VDGE

Производитель: Huawei

Код товара: H835VDGE - Huawei SmartAX MA5616 Service Boards

0 отзывов

Артикул:

По запросу

Сроки: 14 дней

Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

H835VDGE is a 16-channel VDSL2 over POTS service board. It has a 600-ohm built-in real impedance splitter and is used for VDSL2 over POTS access.

Table 1 shows the quick spec.

H835VDGE provides these benefits:

· Supports single ended loop testing (SELT).

· Supports board power-off for energy conservation.

H835VDGE provides these external interfaces:

· 24 VDSL2 Lines:

- G.997.1 (physical layer management)

- G.998.2 (Ethernet-based multi-pair bonding)

- G.998.4 (INP for DSL)

- G.994.1 (handshake procedures)

- BF TR-129 (protocol-independent management model)

- BF TR-159 (management framework for xDSL bonding)

Table 2 shows the comparison.

Model	H835ADLE	H835VDGE
Connector	Champ 64-pin	Champ 64-pin
Built-in splitter	600 ohms	600 ohms
Maximum frame size	2000 bytes (CCUC, or CCUE) 1900 bytes (with CCUB)	PTM: 1600 bytes ATM: 1800 bytes

Do you have any question about the H835VDGE?

H835VDGE Specification
Connector	Champ 64-pin
Built-in splitter	600 ohms
Maximum frame size	PTM: 1600 bytes ATM: 1800 bytes
Operating temperature	-40° C to +65° C
Power consumption	For 17a profiles: • Static: 15 W •Typical: 23 W • Maximum: 29 W For 8b profiles: • Static: 15 W •Typical: 25 W • Maximum: 34 W
Automatic shutdown at high temperature	Supported
Power-on and power-off through the CLI	Supported
Annex	G.992.1 (Annex A) G.992.3 (Annex A/L/M) G.992.5 (Annex A/M) G.993.2 (Annex A/B)
Profile	8a/8b/8c/8d/12a/12b/17a/30a
Vectoring	Not supported
Bonding	Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694.
SRA	Supported
RFI notching	Supported
UPBO	Supported
DPBO	Supported
G.INP	Supported
INM	Supported
Virtual noise	Supported
Built-in MELT	Not supported
Built-in SELT	Supported
IPv6	Supported
1:1 VMAC	Supported

Характеристики
1:1 VMAC	Supported
Annex	G.992.1 (Annex A) G.992.3 (Annex A/L/M) G.992.5 (Annex A/M) G.993.2 (Annex A/B)
Automatic shutdown at high temperature	Supported
Bonding	Supports the bonding of any four ports on the MA5616 equipped with a CCUE control board. And supports 8-pair bonding when being connected to the MA5694.
Built-in MELT	Not supported
Built-in SELT	Supported
Built-in splitter	600 ohms
Connector	Champ 64-pin
DPBO	Supported
G.INP	Supported
INM	Supported
IPv6	Supported
Maximum frame size	PTM: 1600 bytes ATM: 1800 bytes
Operating Temperature	-40° C to +65° C
Power consumption	For 17a profiles: • Static: 15 W •Typical: 23 W • Maximum: 29 WFor 8b profiles: • Static: 15 W •Typical: 25 W • Maximum: 34 W
Power-on and power-off through the CLI	Supported
Profile	8a/8b/8c/8d/12a/12b/17a/30a
RFI notching	Supported
SRA	Supported
UPBO	Supported
Vectoring	Not supported
Virtual noise	Supported

Написать отзыв