Цена договорная
+7 (812) 309 34 73. Договоримся!
The H835ADLE board is a 32-channel ADSL2+ over POTS service board, supporting 600-ohm built-in splitters. Using its ADSL2+ ports, the H835ADLE board works with the ADSL terminal unit-remote end (ATU-R) to provide 32-channel ADSL2+ services.
Quick Spec
Table 1 shows the quick spec.
|
Model |
H835ADLE |
|
Connector |
Champ 64-pin |
|
Built-in splitter |
600 ohms |
|
Maximum frame size |
2000 bytes (CCUC, or CCUE) |
Product Details
H835ADLE provides these benefits:
· Provides a downstream rate of 600 Mbit/s.
· Supports single-ended loop tests (SELTs).
· Supports board power shutdown.
H835ADLE provides these external interfaces:
· 32 POTs ports
· 32 ADSL2+ ports:
- G.992.1 (ADSL)
- G.992.3 (ADSL2)
- G.992.5 (ADSL2+)
- G.997.1 (physical layer management)
- G.998.1 (ATM-based multi-pair bonding)
- G.998.4 (INP for DSL)
Compare to Similar Item
Table 2 shows the comparison.
|
Model |
H832SHLH |
H835ADLE |
|
Connector |
Champ 64-pin |
Champ 64-pin |
|
Built-in splitter |
None |
600 ohms |
|
Maximum frame size |
ATM: 2000 |
2000 bytes (CCUC, or CCUE) 1900 bytes (with CCUB) |
Get More Information
Do you have any question about the H835ADLE?
Contact us now via Live Chat or info@itg-spb.ru.
H835ADLE Specification |
|
|
Connector |
Champ 64-pin |
|
Built-in splitter |
600 ohms |
|
Maximum frame size |
2000 bytes (CCUC, or CCUE) |
|
Operating temperature |
-40°C to +65°C |
|
Power consumption |
Static: 6 W |
|
Automatic shutdown at a high temperature |
Supported |
|
Power-on and power off through the CLI |
Supported |
|
Annex |
G.992.1 Annex A |
|
Bonding |
2, 4, 6, or 8 pairs |
|
SRA |
Supported |
|
RFI notch |
Supported |
|
G.INP |
Supported |
|
INM |
Supported |
|
Built-in MELT |
Not supported |
|
Built-in SELT |
Supported |
|
IPv6 |
Supported |
|
1:1 VMAC |
Supported |
|
DPBO |
Supported |
| Характеристики | |
| 1:1 VMAC | Supported |
| Annex | G.992.1 Annex A G.992.3 Annex A/L/M G.992.5 Annex A/M |
| Automatic shutdown at a high temperature | Supported |
| Bonding | 2, 4, 6, or 8 pairs |
| Built-in MELT | Not supported |
| Built-in SELT | Supported |
| Built-in splitter | 600 ohms |
| Connector | Champ 64-pin |
| DPBO | Supported |
| G.INP | Supported |
| INM | Supported |
| IPv6 | Supported (Not supported when CCUB is used.) |
| Maximum frame size | 2000 bytes (CCUC, or CCUE) 1900 bytes (with CCUB) |
| Operating Temperature | -40°C to +65°C |
| Power consumption | Static: 6 W Typical: 19 W Maximum: 33 W |
| Power-on and power off through the CLI | Supported |
| RFI notch | Supported |
| SRA | Supported |
Теги: H835ADLE Huawei