+7 (812) 309 34 73. Договоримся!
Общая информация (AP2010DN)
Huawei AP2010DN Wireless Access Point Wall Plate AP offers a convenient access solution for building with densely distributed small rooms such as hotels, apartments, dormitories, hospitals, and offices. It offers High-speed, reliable wireless access services at 300 Mbit/s with 2 x 2 MIMO (two spatial streams) and 2.4 GHz5 GHz band switching with build-in antenna. In order to support of unified access controls and policies on the Access controller, it features multiple authentication and encryption modes and advanced security protections.
Быстрые спецификацииs
На рисунке 1 показан внешний вид the AP2010DN.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Number |
AP2010DN |
|
Power Input |
PoE power supply in compliance with IEEE 802.3af/at |
|
Maximum Power Consumption |
5.5W |
|
Operating Temperature |
0°C to +40°C |
|
Antenna Type/Antenna Gain |
Built-in antenna/2.4 GHz: 2 dBi, 5 GHz: 2.5 dBi |
|
Maximum Number of Users |
≤ 128 |
|
Maximum Transmit Power |
19 dBm (combined power) |
|
MIMO: Spatial Streams |
2 x 2:2 |
|
Wireless Protocols |
802.11a/b/g/n |
|
Highest Rate |
300 Mbit/s |
|
Dimensions (H x W x D) |
86 mm x 86 mm x 45 mm |
|
Weight |
≤ 0.4 lb. (0.2 kg) |
Детали продукта
Figure 2 shows the ports of AP2010DN.
Note:
|
? |
ETH0/ETH1: 10/100M port used to connect to the wired Ethernet. |
|
? |
Phone: Phone interface: connects to a POTS phonemodem device. |
|
? |
Default: Reset button used to restore factory settings and restart the AP if you hold down the button more than 3 seconds. |
|
? |
GE/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can connect to a PoE power supply to provide power for APs. |
|
? |
Phone: Phone interface: connects to a traditional PSTN. |
? To be powered by other devices, the GE/PoE port need a Huawei Power Adapter - W0ACPSE14.
Сравнить похожие товары
В таблице 2 показано сравнение of AP2010DN and AP6010DN-AGN-USA.
|
Models |
AP2010DN |
AP6010DN-AGN-USA |
|
Power Input |
PoE power supply in compliance with IEEE 802.3af/at |
12V DC ±10% PoE: –48V DC (in compliance with IEEE 802.3af/at) |
|
Maximum Power Consumption |
5.5W |
10.2W |
|
Operating Temperature |
0°C to +40°C |
–10? to 50? |
|
Antenna Type/Antenna Gain |
Built-in antenna/2.4 GHz: 2 dBi, 5 GHz: 2.5 dBi |
Built-in antenna/2.4 GHz: 4 dBi, 5 GHz: 5 dBi |
|
Maximum Transmit Power |
19 dBm (combined power) |
23 dBm (combined power) |
|
MIMO: Spatial Streams |
2 x 2:2 |
2 x 2:2 |
|
Wireless Protocols |
802.11a/b/g/n |
802.11a/b/g/n |
|
Highest Rate |
300 Mbit/s |
600 Mbit/s |
Что бы получить больше информации
Do you have any question of Huawei AP2010DN access point?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Dimensions (H x W x D) | 86 mm x 86 mm x 45 mm |
| Operating Temperature | 0°C to +40°C |
| Weight | 0.4 lb. (0.2 kg) |
| Maximum Power Consumption | 5.5W |
| Power Input | PoE power supply in compliance with IEEE 802.3af/at |
| Antenna Type/Antenna Gain | Built-in antenna/2.4 GHz: 2 dBi, 5 GHz: 2.5 dBi |
| MIMO: Spatial Streams | 2 x 2:2 |
| Wireless Protocols | 802.11a/b/g/n |
| Highest Rate | 300 Mbit/s |
| Maximum Number of Users | 128 |
| Maximum Transmit Power | 19 dBm (combined power) |
Теги: AP2010DN