+7 (812) 309 34 73

по будням с 10:00 до 18:00

LE0KS9306

Производитель: Huawei
Код товара: LE0KS9306 Huawei S9300 Series Switch
Артикул: ART5069
По запросу
Сроки: 14 дней
Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

Specification
PoE ·Power input: Versions earlier than V200R006C00 support only AC power supply. V200R006C00 and later versions support both AC power supply and DC power supply (only 2200 W DC power modules).
·PoE power module backup: no backup, 3+1 backup, or 2+2 backup
·Maximum output power: 8800 W
Switching capacity 3.84Tbps
QoS Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p fields
ACL, CAR, and actions including Remark and Schedule
Queuing algorithms, such as SP, WRR, DRR, SP+WRR, and SP+DRR
Congestion avoidance mechanisms, including WRED and tail drop
H-QOS
Traffic shaping
Multicast IGMPv1/v2/v3 and IGMP v1/v2/v3 snooping
PIM-DM, PIM-SM, and PIM-SSM
MSDP and MBGP
Prompt leave
Multicast traffic control
Multicast querier
Multicast protocol packet suppression
Multicast CAC
Multicast ACL
Reliability and availability MTBF: 24.2 years
MTTR: 52 minutes
Availability: 0.9999959
MAC address MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source
MAC addresses MAC address limiting based on ports and VLANs
VLAN Access, trunk, and hybrid
Default VLAN
VLAN switching
QinQ and selective QinQ
MAC-based VLAN assignment
IP routing IPv4 dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+
Packet forwarding rate 2880Mpps
Reliability LACP and inter-chassis E-Trunk
VRRP and BFD for VRRP
BFD for BGP/IS-IS/OSPF/static route
NSF and GR for BGP/IS-IS/OSPF/LDP
TE FRR and IP FRR
Ethernet OAM in compliance with IEEE 802.3ah and 802.1ag (hardware-level) ITU-Y.1731
DLDP
Service slot quantity 6
User management Unified user management
802.1x, MAC, and Portal authentications
Charging based on traffic volume and online duration
User authorization based on user groups, domains, and time ranges
Configuration and maintenance iPCA, monitor network quality for any service flow at any network node, at any time, and without extra costs
Terminal access services such as console port login, Telnet, and SSH
Network management protocols, such as SNMPv1/v2/v3
File uploading and downloading through FTP and TFTP
BootROM upgrade and remote in-service upgrade
Hot patches
User operation logs
Security and user management 802.1x authentication and Portal authentication
NAC
RADIUS and HWTACACS authentication for login users
Command line authority control based on user levels (unauthorized users cannot use commands)
Defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and traffic flooding attacks
1K CPU queues
Ping and traceroute
RMON
Security protection Firewall
Network Address Translation (NAT)
IPSec, SSL VPN
Intrusion Protection System (IPS)
Load balancing Analog Digital Conversion (ADC)
Energy saving Energy Efficient Ethernet (802.3az)
LPU slots 6
STP/ERPS STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
BPDU protection, root protection, and loop protection
BPDU tunnel
G.8032 Ethernet Ring Protection Switching (ERPS)
MPU slots 2
Fan slots 2
System power supply slots 4
PoE power supply slots 4
Maximum port density ·V100R006C00 and V200R001C00: 288xFE, 288xGE, 240x10GE
·V200R002C00 to V200R007C00: 288xFE, 288xGE, 240x10GE, 12x40GE
·V200R008C00 to V200R009C00: 288xFE, 288xGE, 240x10GE, 12x40GE, 12x100GE
·V200R010C00 and later versions: 288xFE, 288xGE, 288x10GE, 48x40GE, 24x100GE
Installation In an N66E or N68E cabinet, one or two chassis in a cabinet
CSS CSS card or service port clustering
Maximum power consumption (fully loaded, no PoE power supply) 2200 W
Power specifications ·DC input voltage
Rated voltage: -48 V DC/-60 V DC
Maximum voltage range:
1600 W/2400 W DC power module: -38.4 V DC to -72 V DC
2200 W DC power module: -40 V DC to -72 V DC
·AC input voltage
Rated voltage: 110 V AC/220 V AC, 50/60 Hz
Maximum voltage range: 90 V AC to 290 V AC; 47 Hz to 63 Hz (The output power reduces to half of the maximum output when the input voltage is in the range of 90 V AC to 175 V AC.)
Dimensions (W x D x H, excluding rack-mounting brackets) ·With cable management frames: 442 mm x 585 mm x 441.7 mm (17.4 in. x 23.0 in. x 17.39 in. (10 U))
·Without cable management frames: 442 mm x 489 mm x 441.7 mm (17.4 in. x 19.3 in. x 17.39 in. (10 U))
Weight (empty/fully loaded) 15 kg/42 kg (33.1 lb/92.6 lb)
Environment parameters ·Operating temperature and altitude:
-60 m to +1800 m (197 ft. to 5906 ft.): 0°C to 45°C (32°F to 113°F)
1800 m to 4000 m (5906 ft. to 13123 ft.): Operating temperature decreases by 1°C (1.8°F) every time the altitude increases 220 m (722 ft.).
4000 m (13123 ft.): 0°C to 35°C (32°F to 95°F)
·Operating relative humidity: 5% RH to 95% RH (noncondensing)
·Storage temperature: -40°C to +70°C (-40°F to +158°F)
·Storage altitude: < 5000 m (16404 ft.)
·Storage relative humidity: 5% RH to 95% RH (noncondensing)
Noise at normal temperature (acoustic power) 72 dBA
EMC compliance CISPR22 Class A
CISPR24
EN55022 Class A
EN50024
ETSI EN 300 386 Class A
ICES 003 Class A
AS/NZS CISPR22 Class A
VCCI Class A
IEC61000-6-2
IEC61000-6-4
IEC61000-4-2
ITU-T K 20
ITU-T K 21
ITU-T K 44
CNS13438 CLASS A
KN 22 CLASS A
Environmental standards compliance RoHS
REACH
WEEE
Safety standards compliance IEC 60950-1
EN 60950-1
UL 60950-1
CSA C22.2 No 60950-1
AS/NZS 60950.1
BS EN 60950-1
MPLS Basic MPLS functions
MPLS OAM
MPLS TE
MPLS VPN/VLL/VPLS
  Написать отзыв