+7 (812) 309 34 73. Договоримся!
Общая информация (Huawei S7712 non-PoE Chassis with 2*SRUA, 2*AC Power?(ES0Z1B12ACS0))
ES0Z1B12ACS0 is the Huawei S7712 Basic Engine AC Bundle(Including non-PoE Assembly Chassis, SRUA Main Board*2, 800W AC Power*2).
Быстрые спецификацииs
Figure 1 shows the S7712 chassis appearance. ES0Z1B12ACS0 is the Huawei S7712 Basic Engine AC Bundle(Including non-PoE Assembly Chassis, SRUA Main Board*2, 800W AC Power*2).
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
ES0Z1B12ACS0 |
|
Switching Capacity |
3.84 Tbit/s |
|
Forwarding Performance |
2,880 Mpps |
|
Redundancy Design |
Supervisors, Power modules, CMUs, Fans trays |
|
Wireless Management |
Native AC, wired and wireless convergence AP access control, AP region management, and AP profile management Radio profile management, unified static configuration, and centralized dynamic management Basic WLAN services, QoS, security, and user management AC deployment on different network layers |
|
User Management |
Unified management of wired and wireless users 802.1x, MAC, and portal authentications Charging based on traffic volume, online duration, and destination addresses (DAA mode) User authorization based on user groups, domains, and time ranges |
|
iPCA |
Adds marks on service packets in order to measure the number of lost packets and packet loss ratios in real time with zero payload Measures the number of lost packets and packet loss ratios at the network and device levels on Layer 2 and Layer 3 networks |
|
SVF 2.0 |
256 clients (access switches) and 4,096 APS virtualized into a single device 2-level AS structure Unified management on Huawei and non-Huawei devices |
|
Routing |
IPv4 static routes, RIP, OSPF, IS-IS, and BGP4 IPv6 static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+ IPv4/IPv6 equal-cost routes, policy routing, route policy IPv4 and IPv6 stack Pingv6, Telnetv6, FTPv6, TFTPv6, DNSv6, and ICMPv6 IPv4-to-IPv6 transition technologies, such as IPv6 manual tunnel, 6 to 4 tunnel, ISATAP tunnel, GRE tunnel, and IPv4-compatible automatic tunnel |
|
Virtualization |
CSS horizontal virtualization SVF 2.0 vertical virtualization |
|
Buffer Capacity |
200 ms per Po rt |
|
Pack Weight |
56.1 |
|
Pack Volume |
0.322 |
|
Pack Dimension |
810*650*610 |
|
Net Dimension |
489*442*664 |
Детали продукта
На рисунке 2 показана передняя панель ES0Z1B12ACS0.
Note:
|
? |
Twelve service cards slots, including: Open Service Platform Unit slots 100M Interface Card slots 1000M Interface Card slots GE/10GE Interface Card slots 10GE Interface Card slots 40GE Interface Card slots 40GE/100GE Interface Card slots 100GE Interface Card slots NOTE: The cards supported by a switch depends on the software version. |
|
? |
Two MPUs |
|
? |
A pair of mounting brackets NOTE: The mounting brackets are used to secure the chassis in the cabinet. |
|
? |
Four power modules |
|
? |
Two EH1D200CMU00-Centralized Monitoring Unit |
|
? |
Four PoE power modules In versions earlier than V200R006C00: 800 W AC Power Module 2200 W AC Power Module In V200R006C00 and later versions: 2200 W DC Power Module 800 W AC Power Module 2200 W AC Power Module |
|
? |
Ground screw NOTE: The ground screw is used to ground the chassis. |
|
? |
Front ESD jack NOTE: The ground terminal of an ESD wrist strap can be inserted in this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. |
|
? |
Cable management frames NOTE: Cable management frames are used to route cables. |
На рисунке 3 показана задняя панель ES0Z1B12ACS0.
Note:
|
? |
Four Fan Module |
|
? |
Rear ESD jack NOTE: The ground terminal of an ESD wrist strap can be inserted in this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. |
|
? |
Air filter NOTE: The air filter prevents dust from entering the chassis. |
|
? |
A pair of removable handles NOTE: You can install these handles on two sides of the chassis to lift the chassis. |
The Modules, Cards
Table 2 shows the recommended elements for the
|
Model |
Description |
|
AC power module |
|
|
W2PSA0800 |
800W AC Power Module(Black) |
|
PAC-2200WF |
2200W AC Power Module |
|
DC power module |
|
|
W2PSD2200 |
2200W DC Power Module(Black) |
|
ES02PSD16 |
1600W DC Power Module(Black) |
|
FE-SFP optical transceiver |
|
|
SFP-FE-SX-MM1310 |
Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC) |
|
eSFP-FE-LX-SM1310 |
Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC) |
|
S-SFP-FE-LH40-SM1310 |
Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC) |
|
GE-SFP optical transceiver |
|
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
10G-SFP+ optical transceiver |
|
|
SFP-10G-USR |
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
|
OMXD30000 |
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
|
OSX010000 |
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
|
40GE CFP optical transceiver |
|
|
CFP-40G-SR4 |
High Speed Transceiver CFP-40G-SR4,CFP,40G,Multimode Module(850nm,4*10G,0.1km,MPO) |
|
CFP-40G-LR4 |
High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,10km,stright LC) |
|
CFP-40G-ER4
|
High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,40km,stright LC) |
|
40GE QSFP+ optical transceiver |
|
|
QSFP-40G-eSR4 |
40GBase-eSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.3km,MPO)(Connect to four SFP+ Optical Transceiver) |
|
QSFP-40G-ER4 |
40GBase-ER4 Optical Transceiver,QSFP+,40G,Single-mode Module (1310nm,40km,LC) |
|
100GE CFP optical transceiver |
|
|
CFP-100G-SR10
|
High Speed Transceiver,CFP,100G,Multimode Module(850nm,10*10G,0.1km,MPO) |
|
CFP-100G-LR4
|
CFP, 100G, Single-mode Module(1310nm band,4*25G,10km,stright LC) |
|
CFP-100G-ER4
|
High Speed Transceiver,CFP,100G,Single-mode Module(1310nm band,4*25G,40km,stright LC) |
|
GE copper transceiver |
|
|
SFP-1000BaseT |
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
100GE interface card |
|
|
ES1D2C02FEE0 |
Huawei 2-Port 100GBASE-X Interface Card(EE,CFP) ES1D2C02FEE0 |
|
10GE interface card |
|
|
ES1D2X40SFC0 |
40-Port 10GBASE-X Interface Card(FC,SFP+) |
|
ES1D2X16SSC2 |
Huawei 16-Port 10GBASE-X Interface Card(SC,SFP+) ES1D2X16SSC2 |
|
Main control unit |
|
|
ES0D00MCUA00 |
S7703 Main Control Unit A |
|
Fan module |
|
|
ES0E2FBX |
S7700 Wide Voltage Fan Box |
Сравнить похожие товары
Table 3 shows the comparison of ES0Z1B12ACS0, ES0Z1B06ACS0 and ES0Z1B03ACS0.
|
Product Code |
ES0Z1B06ACS0 |
ES0Z1B03ACS0 |
ES0Z1B12ACS0 |
|
Switching Capacity |
3.84 Tbit/s |
1.92 Tbit/s |
3.84 Tbit/s |
|
Forwarding Performance |
2,880 Mpps |
1,440 Mpps |
2,880 Mpps |
|
Redundancy Design |
Supervisors, Power modules, CMUs, Fans trays |
Supervisors, Power modules, CMUs, Fans trays |
Supervisors, Power modules, CMUs, Fans trays |
|
Buffer Capacity |
200 ms per Port |
200 ms per Port |
200 ms per Po rt |
|
Pack Weight |
45.8 |
21.8 |
56.1 |
|
Pack Volume |
0.247 |
0.124 |
0.322 |
|
Pack Dimension |
638*612*632 |
652*595*322 |
810*650*610 |
|
Net Dimension |
489*442*442 |
489*442*175 |
489*442*664 |
Что бы получить больше информации
У вас есть какие-либо вопросы о ES0Z1B12ACS0?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| iPCA | Adds marks on service packets in order to measure the number of lost packets and packet loss ratios in real time with zero payload Measures the number of lost packets and packet loss ratios at the network and device levels on Layer 2 and Layer 3 networks |
| Wireless Management | Native AC, wired and wireless convergence AP access control, AP region management, and AP profile management Radio profile management, unified static configuration, and centralized dynamic management Basic WLAN services, QoS, security, and user management AC deployment on different network layers |
| User Management | Unified management of wired and wireless users 802.1x, MAC, and portal authentications Charging based on traffic volume, online duration, and destination addresses (DAA mode) User authorization based on user groups, domains, and time ranges |
| SVF 2.0 | 256 clients (access switches) and 4,096 APS virtualized into a single device 2-level AS structure Unified management on Huawei and non-Huawei devices |
| Redundancy Design | Supervisors, Power modules, CMUs, Fans trays |
| Routing | IPv4 static routes, RIP, OSPF, IS-IS, and BGP4 IPv6 static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+ IPv4/IPv6 equal-cost routes, policy routing, route policy IPv4 and IPv6 stack Pingv6, Telnetv6, FTPv6, TFTPv6, DNSv6, and ICMPv6 IPv4-to-IPv6 transition technologies, such as IPv6 manual tunnel, 6 to 4 tunnel, ISATAP tunnel, GRE tunnel, and IPv4-compatible automatic tunnel |
| Virtualization | CSS horizontal virtualization SVF 2.0 vertical virtualization |
| Buffer Capacity | 200 ms per Po rt |
| Pack Weight (kg) | 56.1 |
| Pack Volume (m^3) | 0.322 |
| Pack Dimension (D*W*H mm) | 810*650*610 |
| Net Dimension (D*W*H mm) | 489*442*664 |
| Switching Capacity | 3.84 Tbit/s |
| Forwarding Performance | 2,880 Mpps |
Теги: Huawei S7712 non-PoE Chassis with 2*SRUA, 2*AC Power (ES0Z1B12ACS0) Huawei