+7 (812) 309 34 73. Договоримся!
Общая информация (ET1BS12712S0)
ET1BS12712S0 is the Huawei S12712 Switch assembly chassis, including 12 slots.
Быстрые спецификацииs
Figure 1 shows the S12712 appearance. ET1BS12712S0 is its assembly chassis, including no cards, modulesunits.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
ET1BS12712S0 |
|
Packet Forwarding Rates |
9,120 Mpps; 12,960 Mpps(With Necessary Plug-ins) |
|
Switching Capacity |
17.44 Tbit/s; 44.96 Tbit/s(With Necessary Plug-ins) |
|
MPU Slots |
2 |
|
SFU Slots |
4 |
|
Service Card Slots |
12 |
|
Energy Saving |
Energy Efficient Ethernet (802.3az) |
|
Redundancy Design |
MPUs, SFUs, power supplies, and fan modules |
|
Maximum Power Consumption of the Entire Equipment |
≤ 6,600W |
|
Dimensions (W x D x H) |
With cable management frames: 442 mm x 585 mm x 841.75 mm (17.4 in. x 23.0 in. x 33.1 in. (19 U)) Without cable management frames: 442 mm x 489 mm x 841.75 mm (17.4 in. x 19.3 in. x 33.1 in. (19 U)) |
|
Weight |
63 kg |
Детали продукта
Figure 2 shows the front structure of the ET1BS12712S0.
Note:
|
? |
Two MPUs |
|
? |
Twelve service cards, including: ·Open Service Platform Unit·1000M Interface Card ·GE/10GE Interface Card ·10GE Interface Card ·40GE Interface Card ·100GE Interface Card |
|
? |
Four SFUs |
|
? |
A pair of mounting brackets |
|
? |
Six power modules |
|
? |
Two CMUs |
|
? |
Front ESD jack |
|
? |
Cable management frames |
·The ET1BS12712S0 is just a Chassis that it doesn't provide cards, modulesunits. The cards, modulesunits must be purchased separately.
·The mounting brackets are used to secure the chassis in a cabinet.
·The ground terminal of an ESD wrist strap can be inserted in this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded.
·The cable management frames separate cables on different cards and help route cables orderly.
Figure 3 shows the rear structure of the ET1BS12712S0.
Note:
|
? |
Five Fan Modules |
|
? |
Rear ESD jack |
|
? |
JG ground terminal |
|
? |
A pair of handles |
|
? |
Air filter |
·The ground terminal of an ESD wrist strap can be inserted in this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded.
·The handles are only used for this purpose: After you lift the chassis onto the guide railstray, grasp the handles to drag the chassis into the cabinet.
·The air filter prevents dust from entering the chassis.
The Modules, Cards
Table 2 shows the recommended elements for the ET1BS12712S0.
|
Model |
Description |
|
FE-SFP optical transceiver |
|
|
SFP-FE-SX-MM1310 |
Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC) |
|
eSFP-FE-LX-SM1310 |
Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC) |
|
S-SFP-FE-LH40-SM1310 |
Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC) |
|
GE-SFP optical transceiver |
|
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
10G-SFP+ optical transceiver |
|
|
SFP-10G-USR |
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
|
OMXD30000 |
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
|
OSX010000 |
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
|
40GE CFP optical transceiver |
|
|
CFP-40G-SR4 |
High Speed Transceiver CFP-40G-SR4,CFP,40G,Multimode Module(850nm,4*10G,0.1km,MPO) |
|
CFP-40G-LR4 |
High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,10km,stright LC) |
|
CFP-40G-ER4
|
High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,40km,stright LC) |
|
40GE QSFP+ optical transceiver |
|
|
QSFP-40G-eSR4
|
40GBase-eSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.3km,MPO)(Connect to four SFP+ Optical Transceiver) |
|
QSFP-40G-ER4
|
40GBase-ER4 Optical Transceiver,QSFP+,40G,Single-mode Module (1310nm,40km,LC) |
|
100GE CFP optical transceiver |
|
|
CFP-100G-SR10
|
High Speed Transceiver,CFP,100G,Multimode Module(850nm,10*10G,0.1km,MPO) |
|
CFP-100G-LR4
|
CFP, 100G, Single-mode Module(1310nm band,4*25G,10km,stright LC) |
|
CFP-100G-ER4
|
High Speed Transceiver,CFP,100G,Single-mode Module(1310nm band,4*25G,40km,stright LC) |
|
GE copper transceiver |
|
|
SFP-1000BaseT |
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
100GE interface card |
|
|
ET1D2C02FEE0
|
2-Port 100GBASE-X Interface Card(EE,CFP) ET1D2C02FEE0series) |
|
10GE interface card |
|
|
ET1D2X32SSC0
|
32-Port 10GBASE-X Interface Card(SC,SFP+) |
|
ET1D2X12SSA0
|
12-Port 10GBASE-X Interface Card(SA,SFP+) |
|
40GE interface card |
|
|
ET1D2L08QSC0
|
8-Port 40GBASE-X Interface Card(SC,QSFP+) |
|
ET1D2L02QSC0
|
2-Port 40GBASE-X Interface Card(SC,QSFP+) |
|
Centralized monitoring unit |
|
|
EH1D200CMU00
|
Centralized Monitoring Board |
|
Cluster switching system unit |
|
|
EH1D2VS08000
|
8-Port 10G Cluster Switching System Service Unit (SFP+) |
|
Firewall module |
|
|
ET1D2FW00S02
|
NGFW Module C,with HW General Security Platform Software |
|
ET1D2FW00S01
|
NGFW Module B,with HW General Security Platform Software |
|
GE/10GE interface card |
|
|
ET1D2S08SX1E
|
8-Port 10GBASE-X and 8-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T Combo Interface Card(X1E,RJ45/SFP/SFP+) |
|
ET1D2S04SX1E
|
4-Port 10GBASE-X and 24-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T Combo Interface Card(X1E,RJ45/SFP/SFP+) |
|
Intrusion prevention system module |
|
|
ET1D2IPS0S00
|
IPS Module A,with HW General Security Platform Software |
|
Main processing unit |
|
|
ET1D2MPUA000
|
S12708/S12712,Main Processing Unit A(Optional clock) |
|
Switch fabric unit |
|
|
ET1D2SFUD000
|
S12708/S12712,Switch Fabric Unit D |
|
ET1D2SFUA000
|
S12708/S12712,Switch Fabric Unit A |
|
Wireless access controller unit |
|
|
ACU2
|
WLAN ACU2 Access Controller Unit(128 AP Control Resource Included) |
|
GE interface card |
|
|
ET1D2T36SEA0
|
36-Port 10/100/1000BASE-T and 12-Port 100/1000BASE-X Interface Card(EA,RJ45/SFP) |
|
ET1D2G48SX1E
|
48-Port 100/1000BASE-X Interface Card(X1E,SFP) |
Сравнить похожие товары
Table 3 shows the comparison of ET1BS12712S0 and ET1BS12708S0.
|
Product Code |
ET1BS12712S0 |
ET1BS12708S0 |
|
Description |
Huawei S12712 Switch assembly chassis |
Huawei S12708 Switch assembly chassis |
|
Packet Forwarding Rates |
9,120 Mpps; 12,960 Mpps(With Necessary Plug-ins) |
6,240 Mpps; 9,120 Mpps(With Necessary Plug-ins) |
|
Switching Capacity |
17.44 Tbit/s; 44.96 Tbit/s(With Necessary Plug-ins) |
12.32 Tbit/s; 32.16 Tbit/s(With Necessary Plug-ins) |
|
MPU Slots |
2 |
2 |
|
SFU Slots |
4 |
4 |
|
Service Card Slots |
12 |
8 |
|
Maximum Power Consumption of the Entire Equipment |
≤ 6,600W |
≤ 4,400W |
|
Weight |
63 kg |
42 kg |
Что бы получить больше информации
У вас есть какие-либо вопросы о ET1BS12712S0?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| User Management | Unified user management |
| Redundancy Design | MPUs, SFUs, power supplies, and fan modules |
| QoS | 256K ACLs |
| Multicast | 128,000 multicast routing entries |
| VLAN | Access, trunk, and hybrid interface types, auto-negotiation of LNP links |
| Dimensions (H x W x D) | 841.75 mm x 442 mm x 489 mm, 19U |
| Switching Capacity | 17.44 Tbit/s; 44.96 Tbit/s |
| Interoperability | Interoperable with VBST (compatible with PVST/PVST+/RPVST) |
| Reliability | Link Aggregation Control Protocol (LACP) and E-Trunk |
| IP Routing | 3M IPv4 routing entries |
| Packet Forwarding Rates | 9,120 Mpps; 12,960 Mpps |
| MPU Slots | 2 |
| SFU Slots | 4 |
| Service Card Slots | 12 |
| CSS2 | 1+N backup of MPUs in a cluster |
| Wireless Network Management | Native AC |
| iPCA Quality Awareness | Marking real service packets to obtain real-time count of dropped packets and packet loss ratio |
| SVF2.0 Virtualization | Up to 4K clients (access switches and APs) virtualized into a single device |
| Ring Network Protection | Spanning Tree Protocol (STP) (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
| Network Synchronization | Ethernet synchronization |
| Security Protection* | Firewall |
| ARP | 256K ARP entries |
| Energy Saving | Energy Efficient Ethernet (802.3az) |
| Weight (empty chassis) | 63 kg |
| Maximum Power Consumption of the Entire Equipment | 6,600W |
| MAC Address | 1M MAC address entries |
| MPLS | Basic MPLS functions |
| Configuration and Maintenance | Terminal access services such as console port login, Telnet, and SSH |
| Security and Management | MAC address, Portal, 802.1x, and Dynamic Host Configuration Protocol (DHCP) snooping triggered authentication |
| Operating Voltage | DC: –40V to –72V AC: 90V to 290V |
Теги: ET1BS12712S0 Huawei