+7 (812) 309 34 73. Договоримся!
Общая информация (CE7850-EI-B00)
CE7850-EI-B00 provides 32 40GE QSFP+ optical ports (each can be split into 4 10GE ports), and can be equipped with 2 pluggable power modules and 2 pluggable fan modules.
Быстрые спецификацииs
На рисунке 1 показан внешний вид CE7850-EI-B00.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
CE7850-EI-B00 |
|
Software Version |
V100R003C00 and later |
|
Ports |
32 x 40 GE QSFP+ ports |
|
Power supply |
600W AC |
|
Number of stack members/Stack bandwidth |
16/640G(unidirectional) |
|
Switching Capacity |
2.56 Tbit/s |
|
Forwarding Performance |
1,440 Mpps |
|
Maximum power consumption |
431 W |
|
Typical power consumption |
271 W (100% traffic load, QSFP+ high-speed copper cables on 32 ports, double power modules) |
|
Dimensions (W x D x H) |
17.4 in. x 23.9 in. x 1.7 in. (442 mm x 607 mm x 43.6 mm) |
|
Weight (fully loaded) |
11.2 kg (24.7 lb) |
Детали продукта
Figure 2 shows the rear (port side) panel of CE7850-EI-B00.
Note:
|
? |
40GE QSFP+ Ethernet optical ports |
Figure 3 shows the front (power supply side) panel of CE7850-EI-B00.
Note:
|
? |
Power supply slot 1 |
|
? |
Fan slot 1 |
|
? |
Console port |
|
? |
Bar code label |
|
? |
Fan slot 2 |
|
? |
Power supply slot 2 |
|
? |
USB port |
|
? |
ETH management port |
The Modules
Table 2 shows the recommended elements for the CE7850-EI-B00.
|
Model |
Description |
|
40GE QSFP+ optical transceiver |
|
|
QSFP-40G-iSR4 |
40GBase-iSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.15km,MPO)(Connect to four SFP+ Optical Transceiver) |
|
QSFP-40G-LR4 |
40GBase-LR4 Optical Transceiver,QSFP+,40GE,Single-mode Module(1310nm,10km,LC) |
|
FAN-40HA |
|
|
FAN-40HA-F |
Fan box(HA,Front to Back,FAN panel side intake) |
|
FAN-40HA-B |
Fan box(HA,Back to Front,FAN panel side exhaust) |
Сравнить похожие товары
Table 3 shows the comparison of CE7850-EI-B00 and CE6850-48S4Q-EI.
|
Product Code |
CE7850-EI-B00 |
CE6850-48S4Q-EI |
|
Fixed 10GE interfaces |
None |
48*10GE SFP+ |
|
Fixed 40GE interfaces |
32*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces |
4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces. |
|
Switching Capacity |
2.56 Tbit/s |
1.28 Tbit/s |
|
Forwarding Rate |
1,440 Mpps |
960 Mpps |
|
Maximum power consumption |
431 W |
272 W |
|
Typical power consumption |
271 W |
180 W |
Что бы получить больше информации
У вас есть какие-либо вопросы о CE7850-EI-B00?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Dimensions (W x D x H) | 17.4 in. x 23.9 in. x 1.7 in. (442 mm x 607 mm x 43.6 mm) |
| QoS | Traffic classification based on L2 headers, L3 protocols, L4 protocols, and 802.1p priority |
| Multicast | IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
| VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
| IPv6 | IPv6 Neighbor Discovery (ND) |
| Ports | 32 x 40 GE QSFP+ |
| Switching Capacity | 2.56 Tbit/s |
| Forwarding Performance | 1,440 Mpps |
| MAC Address Table | Maximum: 288k |
| Reliability | LACP |
| IP Routing | IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
| ACL | Ingress: 3,750; Egress: 1,000 |
| SDN | Agile Controller |
| ARP | Maximum: 128k |
| ND | Maximum: 48k |
| IPv4 FIB | Maximum: 256k |
| IPv6 FIB | Maximum: 128k |
| Multicast FIB | Maximum: 8k |
| Environment Parameters | Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) Storage temperature: -40°C to 70°C (-40°F to 158°F) Relative humidity: 5% RH to 95% RH, non-condensing |
| Maximum Power Consumption | 431W |
| Network Convergence | FCoE |
| Airflow Design | Front-to-back or back-to-front |
| Device Virtualization | iStack |
| Programmability | OPS |
| MPLS | MPLS |
| Configuration and Maintenance | Console, Telnet, and SSH terminals |
| Security and Management | 802.1x authentication |
| Weight (fully loaded) | 11.2 kg (24.7 lb) |
| Operating Voltage | 90V AC to 290V AC |
| Network Virtualization | TRILL |
| Traffic Analysis | NetStream |
Теги: CE7850-EI-B00 Huawei