+7 (812) 309 34 73. Договоримся!
Общая информация (CR5P5KBASD6A)
Huawei NetEngine5000E Cluster Routers CR5P5KBASD6A NetEngine5000E-X16A 400G Basic Configuration DC for Multi Chassis-12 pcs PM.
Быстрые спецификацииs
На рисунке 1 показан внешний вид Huawei Router - CR5P5KBASD6A.
Таблица 1 показывает Быстрые спецификацииs.
Product Code |
Huawei Router - CR5P5KBASD6A |
Throughput |
Non-blocking switch fabric, multi-chassis support Maximum system capacity: 819 Tbit/s, 64 chassis (400G) |
Port Capacity |
15 Tbit/s, single chassis (480G) |
Slots/CLC |
16 slots/single chassis |
Interface Types |
GE, 10 GE, 155M POS, 622M POS, 2.5G POS, 10G POS, 40G POS, 40 GE, 100 GE, etc. |
Routing Protocol |
IPv4 static routing, RIP, OSPF, IS-IS, BGP-4, PIM, MSDP, and MBGP |
IPv6 |
IPv4 & IPv6 dual stack; IPv6 line-speed forwarding based on hardware IPv6 static route, BGP4+, RIPng, OSPFv3, and IS-ISv6 IPv6 peer discovery, PMTU discovery, TCP6, ping IPv6, Tracert IPv6, socket IPv6, TFTP IPv6 client, IPv6 policy route, IPv6 NetStream, etc. Manually configured tunnel, automatic tunnel, and 6to4 tunnel |
High Availability |
1:1 standby for MPU, 3+1 backup switching fabric, 8+8 backup for power supply, and 2+2 backup for fan Hot-swappable based on state, Non-Stop Forwarding (NSF) and Non-Stop Routing (NSR) BFD for VRRP/BGP/OSPF/ISIS/TE LSP/LDP/LSP/TE and PIM IGP/BGP/Multicast Fast Convergence IP/LDP/BGP/TE Fast Re-Route (FRR), BGP/ISIS Auto FRR, ETH Trunk, and IP Trunk In-Service Software Upgrade (ISSU), automatic fault diagnosis function, and hot patching Configuration management Bi-direction compatible |
Детали продукта
Figure 2 shows the front panel of Huawei Router - CR5P5KBASD6A.
Figure 3 shows the back panel of Huawei Router - CR5P5KBASD6A.
The Optical transceiver
Table 2 shows the recommended elements for the Huawei Router - CR5P5KBASD6A.
Model |
Description |
FE-SFP Optical Transceiver |
|
SFP-FE-SX-MM1310 |
SFP,100M/155M,Multi-mode Module(1310nm,2km,LC) |
eSFP-FE-LX-SM1310 |
eSFP,100M/155M,Single-mode Module(1310nm,15km,LC) |
S-SFP-FE-LH40-SM1310 |
eSFP,FE,Single-mode Module(1310nm,40km,LC) |
GE-SFP Optical Transceiver |
|
SFP-1000BaseT |
SFP,GE,Electrical Interface Module(100m,RJ45) |
eSFP-GE-SX-MM850 |
eSFP,GE,Multi-mode Module(850nm,0.55km,LC) |
SFP-GE-LX-SM1310 |
eSFP,GE,Single-mode Module(1310nm,10km,LC) |
S-SFP-GE-LH40-SM1310 |
eSFP,GE,Single-mode Module(1310nm,40km,LC) |
S-SFP-GE-LH40-SM1550 |
eSFP,GE,Single-mode Module(1550nm,40km,LC) |
Get More Information
Do you have any question about the CR5P5KBASD6A?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
Specification | |
Interface Types | GE 10GE 155M POS 622M POS 2.5G POS 10G POS 40G POS 40GE 100GE |
High Availability | 1:1 standby for MPU, 3+1 backup switching fabric, 8+8 backup for power supply and 2+2 back for fan<BR>hot swappable based on state,Non-stop Forwarding (NSF) and Non-stop Routing (NSR)<BR>BFD for VRRP/BGP/OSPF/ISIS/TE LSP/LDP/ LSP/TE and PIM<BR>IGP/BGP/Multicast Fast Convergence<BR>IP/LDP/BGP/TE Fast Re-Route (FRR), BGP/ISIS Auto FRR, ETH Trunk, IP Trunk<BR>In-Service Software Upgrade (ISSU), Automatic fault diagnosis function, Hot Patching<BR>Configuration Management<BR>Bi-Direction Compatible |
IPv6 | IPv4 & IPv6 dual stack; IPv6 line speed forwarding based on hardware<BR>IPv6 static route, BGP4+, RIPng, OSPFv3, IS-ISv6<BR>IPv6 peer discovery, PMTU discovery, TCP6, ping IPv6, Tracert IPv6, socket IPv6, TFTP IPv6 client, IPv6 policy route , IPv6 NetStream, etc<BR>Manually configured tunnel, automatic tunnel, 6 to 4 tunnel |
Throughput capability | Non-block switch fabric, support multi Chassis<BR>The maximum system capacity: 819Tbps/64 Chassis (400G) |
Port capacity | 15Tbps/ single Chassis (480G) |
Routing protocol | IPv4 static route, OSPF, IS-IS, BGP, PIM, MSDP, MBGP |
Теги: CR5P5KBASD6A Huawei