+7 (812) 309 34 73. Договоримся!
Общая информация (JG940A)
HPE FlexNetwork 5130 EI Series switches are fully managed enterprise class Gigabit switches supporting Layer 3 static routing and RIP routing, IRF stacking up to nine units high, with four built in 10 Gigabit links. This JG940A has 24 x 10/100/1000 PoE+ enabled ports, 2 x 1GbE / 10GbE SFP+ ports, and 2x RJ 45 1GbE / 10GBASE T ports. Transceivers must be purchased separately.
Быстрые спецификации
На рисунке 1 показан внешний вид HPE JG940A.
Таблица 1 показывает быстрые спецификации.
|
Product Code |
JG940A |
|
Type |
HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch |
|
I/O ports and slots |
24 x RJ-45 autosensing 10/100/1000 ports 2 x SFP+ fixed 1000/10000 SFP+ ports 2 x RJ-45 1/10GBASE-T ports |
|
Additional ports and slots |
1 x RJ-45 serial console port |
|
Memory and processor |
1 GB SDRAM Packet buffer size: 1.5 MB 512 MB flash |
|
Dimensions |
17.32 x 14.17 x 1.72 in (43.99 x 35.99 x4.37 cm) |
|
Weight |
13.23 lb (6 Kg) |
Детали продукта
На рисунке 2 показана передняя панель HPE JG940A.
Note:
|
? |
24 × 10/100/1000Base-T autosensing Ethernet port |
|
? |
2 × SFP+ port |
|
? |
2 × 1/10GBase-T autosensing Ethernet port |
|
? |
Console port |
|
? |
Port LED mode switching button |
|
? |
Port mode LED |
|
? |
LEDs (10/100/1000Base-T autosensing Ethernet port LED, SFP+ port LED, System status LED (SYS), RPS status LED (RPS), 1/10G Base-T autosensing Ethernet port LED) |
На рисунке 3 показана задняя панель HPE JG940A.
Note:
|
? |
AC-input power receptacle |
|
? |
RPS receptacle |
|
? |
Grounding screw |
Сравнить похожие товары
В таблице 2 показано сравнение.
|
Product Code |
JG938A |
JG939A |
JG940A |
JG941A |
|
Type |
HPE FlexNetwork 5130-24G-2SFP+-2XGT EI Switch |
HPE FlexNetwork 5130-48G-2SFP+-2XT EI Switch |
HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch |
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch |
|
I/O ports and slots |
· 24 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: halffull; 1000BASE-T: full only · 2 x SFP+ fixed 1000/10000 SFP+ ports · 2 x RJ-45 1/10GBASE-T ports |
· 48 x 10/100/1000 ports, · 2 x 1GbE / 10GbE SFP+ ports, · 2 x RJ 45 1GbE / 10GBASE T ports. |
· 24 x RJ-45 autosensing 10/100/1000 ports · 2 x SFP+ fixed 1000/10000 SFP+ ports · 2 x RJ-45 1/10GBASE-T ports |
· 48 x RJ-45 autosensing 10/100/1000 ports · 2 x SFP+ fixed 1000/10000 SFP+ ports · 2 x RJ-45 1/10GBASE-T ports |
|
Additional ports and slots |
1 x RJ-45 serial console port |
1 x RJ-45 serial console port |
1 x RJ-45 serial console port |
1 x RJ-45 serial console port |
Что бы получить больше информации
У вас есть какие-либо вопросы о JG940A?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Differentiator | · Gigabit Ethernet switch with 24 10/100/1000BASE-T, 2 SFP+ and 2 10GBASE-T ports · Intelligent Resilient Framework (IRF) technology, static and RIP Layer 3 routing, and PoE/PoE+, supported |
| Routing/switching capacity | 128 Gbps |
| Stacking capabilities | IRF 9 switches |
| Latency | 1000 Mb Latency: < 5 µs 10 Gbps Latency: < 1.5 µs |
| PoE capability | 370 W PoE+ |
| Operating temperature range | -5 to 45°C |
| Operating humidity range | 10 to 90% (noncondensing) |
| Minimum dimensions (W x D x H) | 17.32 x 14.17 x 1.72 in (43.99 x 35.99 x4.37 cm) |
| Input voltage | 100 - 240 VAC, rated -54 to -57 VDC, rated (depending on power supply chosen) |
| Memory and processor | · 1 GB SDRAM · Packet buffer size: 1.5 MB · 512 MB flash |
| Power consumption | 425 W (maximum) |
| Heat dissipation | 105 / 1450 BTU/hr (110.78 / 1529.75 kJ/hr) |
| Management features | IMC - Intelligent Management Center Command-line interface Web browser SNMP manager |
| Throughput | up to 96 Mpps |
| Type | HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch |
| Ports | · 24 x RJ-45 autosensing 10/100/1000 ports · 2 x SFP+ fixed 1000/10000 SFP+ ports · 2 x RJ-45 1/10GBASE-T ports |
| Weight | 13.23 lb (6 Kg) |
Теги: JG940A HPE