+7 (812) 309 34 73. Договоримся!
Общая информация (J9801A)
HPE 1810 Switch Series devices are smart-managed, fixed-configuration Gigabit Ethernet and Fast Ethernet Layer 2 switches designed for small businesses looking for key features in an easy-to-administer solution. This J9801A has 22 RJ-45 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports.
Быстрые спецификации
На рисунке 1 показан внешний вид HPE J9801A.
Таблица 1 показывает быстрые спецификации.
|
Product Code |
J9801A |
|
Type |
HPE 1810-24 v2 Switch |
|
Ports |
22 × RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: halffull 2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: halffull; 1000BASE-T: full only 2 SFP autosensing 100/1000 ports (IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 100BASE-TX: halffull; 1000BASE-T: full only Supports a maximum of 22 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports plus 2 SFP port |
|
Memory and processor |
Up to 38.7 Mp/s |
|
Throughput |
12.4 Gb/s |
|
Dimensions (W x D x H) |
32.99 x 17.3 x 4.39 cm (12.99 x 6.81 x 1.73 in) (1U height) |
|
Weight |
1 kg (2.2 lb) |
Детали продукта
На рисунке 2 показана передняя панель HPE J9801A.
Note:
|
? |
Link/Act and Speed LEDs |
|
? |
Power and Fault LEDs |
|
? |
Locator LED |
|
? |
Reset button |
|
? |
Clear button |
|
? |
22 × 10/100BASE-TX RJ-45 ports |
|
? |
2 × 10/100/1000BASE-T RJ-45 port |
|
? |
2 × SFP slots |
Сравнить похожие товары
В таблице 2 показано сравнение.
|
Product Code |
J9800A |
J9801A |
|
Type |
HPE 1810-8 v2 Switch |
HPE 1810-24 v2 Switch |
|
Throughput |
Up to 2.5 Mp/s |
Up to 38.7 Mp/s |
|
Switching capacity |
3.4 Gb/s |
12.4 Gb/s |
|
Ports |
7 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: halffull 1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: halffull; 1000BASE-T: full only Supports a maximum of 7 autosensing 10/100 ports plus 1 autosensing 10/100/1000 ports |
22 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: halffull 2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: halffull; 1000BASE-T: full only 2 SFP autosensing 100/1000 ports (IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 100BASE-TX: halffull; 1000BASE-T: full only Supports a maximum of 22 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports plus 2 SFP port |
Что бы получить больше информации
У вас есть какие-либо вопросы о J9801A?
Свяжитесь с нами через ЧАТ или e-mail: cisco@router-
| Specification | |
| Nonoperating/storage temperature | -40° to 70°C (-40° to 158°F) |
| Nonoperating/storage relative humidity | 15% to 95% @ 60°C (140°F) |
| Denial of service protection | CPU DoS Protection |
| General protocols | IEEE 802.1p Priority IEEE 802.1Q VLANs IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3x Flow Control RFC 1534 DHCP/BOOTP Interoperation RFC 2030 Simple Network Time Protocol (SNTP) v4 |
| Voltage | 100 - 127 / 200 - 240 V ac |
| Current | 0.4/0.3 A |
| Maximum power rating | 22 W |
| Acoustic | Power: 0 dB no fan |
| Memory and processor | 128MB RAM, 8MB flash; packet buffer size: 512KB |
| 100Mb latency | < 3.4 µs (64-byte packets) |
| Switching capacity | 12.4 Gb/s |
| MAC address table size | 8000 entries |
| Emissions | EN 55022 Class A; CISPR 22 Class A; VCCI V-3; FCC (CFR 47, Part 15) Subpart B Class A; VCCI V-4 |
| Dimensions (W x D x H) | 32.99 x 17.3 x 4.39 cm (12.99 x 6.81 x 1.73 in) (1U height) |
| Network management | IEEE 802.1AB Link Layer Discovery Protocol (LLDP) |
| Operating temperature | 0° to 40°C (32° to 104°F) |
| Immunity | ESD: IEC 61000-4-2 Radiated: IEC 61000-4-3 EFT/Burst: IEC 61000-4-4 Surge: IEC 61000-4-5 Conducted: IEC 61000-4-6 Power frequency magnetic field: IEC 61000-4-8 Voltage dips and interruptions: IEC 61000-4-11 Harmonics: IEC 61000-3-2 Flicker: IEC 61000-3-3 |
| Altitude | up to 3 km (10,000 ft) |
| Mounting | Mounts in an EIA-standard 19-inch telco rack (hardware included), horizontal surface, wall and under table mounting |
| Throughput | Up to 38.7 Mp/s |
| Frequency | 50/60 Hz |
| Safety | UL 60950-1; IEC 60950; EN 60950 |
| Type | HPE 1810-24 v2 Switch |
| Operating relative humidity | 15% to 95% @ 40°C (104°F) |
| Ports | 22 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full 2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP autosensing 100/1000 ports (IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 100BASE-TX: half or full; 1000BASE-T: full only Supports a maximum of 22 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports plus 2 SFP port |
| Weight | 1 kg (2.2 lb) |
Теги: J9801A HPE