HPE JG722A
  +7 (812) 309 34 73

по будням с 10:00 до 18:00

JG722A

Производитель: HPE
Код товара: JG722A - HP 850 Controller
Артикул: ART14191

Цена договорная

Нет в наличии
Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

Specification
Additional ports and slots 1 RJ-45 serial console port
1 RJ-45 out-of-band management port
Memory and processor (Processor) Broadcom XLP432 Eight core @ 1.4 GHz, 4GB flash, 4GB DDR3 SDRAM
Nonoperating/storage temperature -40° to 70°C (-40° to 158°F)
Nonoperating/storage relative humidity 5% to 95%, noncondensing
AC voltage 100 - 240 V ac
DC voltage -48 to -60 V dc
Maximum heat dissipation 576.03 kJ/hr (546 BTU/hr)
Maximum power rating 150 W
I/O ports and slots · 8 dual-personality ports; 8 RJ-45 autosensing 100/1000 ports (IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Duplex: 100BASE-TX: half or full; 1000BASE-T: full only Media type: Auto-MDIX SFP 100/1000 Mb/s ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
· 2 SFP+ 10GbE ports
Mounting and enclosure EIA-standard 19-inch telco rack or equipment cabinet (hardware included)
Dimensions (W x D x H) 44 x 42 x 4.36 cm (17.32 x 16.54 x 1.72 in) (1U height)
Power supplies 2 power supply slots
1 minimum power supply required
Includes: 1 x JG745A (HP X351 150 W 100 - 240 V a to 12 V dc power supply)
Operating temperature 0° to 45°C (32° to 113°F)
Altitude Up to 5 km (16,404 ft)
Frequency 50/60 Hz
Type HP 850 Unified Wired-WLAN Appliance
Operating relative humidity 5% to 95%, noncondensing
Features Default supported APs: 64
Maximum supported APs: 512 (via the optional purchase of the 32 or 128 access point E-LTU) Maximum supported clients and centralized throughput:
10,000 clients
10G centralized throughput
Maximum supported users via local portal authentication: 2000
Maximum supported users via local authentication (AAA): 1,000
Maximum supported configured SSIDs: 512
Maximum supported ACLs: 32,000
Supported MSM APs are automatically discovered, Comware firmware is loaded, and the APs can be fully managed. AP upgrade license rules for redundant HP 850 Unified Wired-WLAN Appliance deployments
The primary HP 850 Unified Wired-WLAN Appliance’s AP count must be increased using the optional HP Unified Wired-WLAN 128 AP E-LTU (JG649AAE) or the HP Unified Wired-WLAN 32 AP E-LTU (JG774AAE).
The secondary HP 850 Unified Wired-WLAN Appliance’s AP count can be increased as needed using the reduced-cost HP Unified Wired-WLAN 128 AP Redundant E-LTU.
The AC Power supplies are hot-swappable.
Weight 5.6 kg (12.35 lb)
  Написать отзыв