+7 (812) 309 34 73. Договоримся!
The Cisco® Catalyst® 9120 Series Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. Wi-Fi 6; 4x4:4 MIMO, A Domain.
Quick Specs
Table 1 shows the Quick Specs.
|
Product Code |
C9120AXE-A |
|
Description |
Cisco Catalyst 9120AXE Series, A Domain |
|
Software |
• Cisco Unified Wireless Network Software Release 8.9.x or later • Cisco IOS® XE Software Release 16.11 with AP Device Pack, or later |
|
Supported wireless LAN controllers |
• Cisco Catalyst 9800 Series Wireless Controllers • Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
|
Dimensions (W x L x H) |
8.5 x 8.05x 2.0" (21.6 x 21.6 x 5.1 cm) |
|
System memory |
• 2048 MB DRAM • 1024 MB flash |
|
Frequency band and 20-MHz operating channels |
A (A regulatory domain): • 2.412 to 2.462 GHz; 11 channels • 5.180 to 5.320 GHz; 8 channels • 5.500 to 5.700 GHz; 8 channels(excludes 5.600 to 5.640 GHz) • 5.745 to 5.825 GHz; 5 channels |
Product Details
Cisco AP 9120 Series provides these features:
• Wi-Fi 6 (802.11ax)
• Cisco RF ASIC
• Uplink/downlink OFDMA
• MU-MIMO technology
• BSS coloring
• Target wake time
• Intelligent Capture
• Flexible Radio Assignment
• Dual 5-GHz radio support
• Smart antenna connector
• Cisco Mobility Express
• Multigigabit Ethernet support
• Bluetooth 5
• Container support for applications
• Apple Features
Supported Platforms
Table 2 shows the supported platforms and software.
|
Supported wireless LAN controllers and Software |
Recommended Model |
|
Cisco 3500 Series Wireless Controllers |
AIR-CT3504-K9 |
|
Cisco 5520 Series Wireless Controllers |
AIR-CT5520-K9 |
|
Cisco 8540 Series Wireless Controllers |
AIR-CT8540-K9 AIR-CT8540-1K-K9 |
|
Cisco 9800 series Wireless Controllers |
C9800-40-K9 C9800-80-K9 |
|
Cisco Virtual Wireless Controller |
/ |
|
Cisco Unified Wireless Network Software Release 8.9 or later |
/ |
|
Cisco IOS ® XE Software Release 16.11 or later |
/ |
Compare to Similar Items
Table 3 shows the comparison of Cisco AP 9120AXE Series.
|
Product Code |
Description |
|
C9120AXE-A |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, A Domain |
|
C9120AXE-B |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, B Domain |
|
C9120AXE-D |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, D Domain |
|
C9120AXE-E |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, E Domain |
|
C9120AXE-F |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, F Domain |
|
C9120AXE-G |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, G Domain |
|
C9120AXE-H |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, H Domain |
|
C9120AXE-I |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, I Domain |
|
C9120AXE-K |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, K Domain |
|
C9120AXE-N |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, N Domain |
|
C9120AXE-Q |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, Q Domain |
|
C9120AXE-R |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, R Domain |
|
C9120AXE-S |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, S Domain |
|
C9120AXE-T |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, T Domain |
|
C9120AXE-Z |
Cisco Catalyst 9120AXE Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, Z Domain |
Get More Information
Do you have any question about the C9120AXE-A?
Contact us now via Live Chat or info@itg-spb.ru.
C9120AXE-A Specification |
|
|
Description |
Cisco Catalyst 9120AXE Series, A Domain |
|
Software |
• Cisco Unified Wireless Network Software Release 8.9.x or later • Cisco IOS® XE Software Release 16.11 with AP Device Pack, or later |
|
Supported wireless LAN controllers |
• Cisco Catalyst 9800 Series Wireless Controllers • Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
|
802.11n version 2.0 (and related) capabilities |
• 4x4 MIMO with four spatial streams • Maximal Ratio Combining (MRC) • 802.11n and 802.11a/g beamforming • 20- and 40-MHz channels • PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 Dynamic Frequency Selection (DFS) • Cyclic Shift Diversity (CSD) support |
|
802.11ac |
• 4x4 downlink MU-MIMO with four spatial streams • MRC • 802.11ac beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support |
|
802.11ax |
• 4x4 downlink MU-MIMO with four spatial streams • Uplink/downlink OFDMA • TWT • BSS coloring • MRC • 802.11ax beamforming • 20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) • 802.11 DFS • CSD support |
|
Integrated antenna |
Flexible radio (either on 2.4GHz or on 5GHz) • 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth • 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth Dedicated 5GHz radio • 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
|
External antenna (sold separately) |
• Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) • Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna • Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios • Supports Self-Identifiable Antennas (SIA) on one RP-TNC port |
|
Smart Antenna Connector |
• Available on the 9120E and on the 9120P only • Compact multi RF connector with DART interface • Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector • Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio |
|
Interfaces |
• 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45)–IEEE 802.3bz • Management console port (RJ-45) • USB 2.0 @ 3.75W (enabled via future software) |
|
Indicators |
• Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
|
Dimensions (W x L x H) |
• Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7" (21.6 x 21.6 x 4.3 cm), C9120E and C9120P: 8.5 x 8.05x 2.0" (21.6 x 21.6 x 5.1 cm) |
|
Input power requirements |
• 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE®) • Cisco power injector, AIR-PWRINJ6= • 802.3af PoE • Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
|
Environmental |
Cisco Catalyst 9120AXI • Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) • Nonoperating (storage) altitude test: 25˚C, 15,000 ft. • Operating temperature: 32° to 122°F (0° to 50°C) • Operating humidity: 10% to 90% (noncondensing) • Operating altitude test: 40˚C, 9843 ft. Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet; however, the USB interface will remain enabled Cisco Catalyst 9120AXE and 9120AXP • Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) • Nonoperating (storage) altitude test: 25˚C, 15,000 ft. • Operating temperature: -4° to 122°F (-20° to 50°C) • Operating humidity: 10% to 90% (noncondensing) • Operating altitude test: 40˚C, 9843 ft. |
|
System memory |
• 2048 MB DRAM • 1024 MB flash |
|
Warranty |
Limited lifetime hardware warranty |
|
Available transmit power settings |
2.4 GHz • 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1dBm (0.79mW) • -4dBm(0.39mW) 5 GHz • 26 dBm (400 mW) • 23 dBm (200 mW) • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12.5 mW) • 8 dBm (6.25 mW) • 5 dBm (3.13 mW) • 2 dBm (1.56 mW) • -1dBm (0.79mW) |
|
Frequency band and 20-MHz operating channels |
A (A regulatory domain): • 2.412 to 2.462 GHz; 11 channels • 5.180 to 5.320 GHz; 8 channels • 5.500 to 5.700 GHz; 8 channels(excludes 5.600 to 5.640 GHz) • 5.745 to 5.825 GHz; 5 channels |
| Характеристики | |
| 802.11ac | • 4x4 downlink MU-MIMO with four spatial streams• MRC• 802.11ac beamforming• 20-, 40-, 80-, and 160-MHz channels• PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)• 802.11 DFS• CSD support |
| 802.11ax | • 4x4 downlink MU-MIMO with four spatial streams• Uplink/downlink OFDMA• TWT• BSS coloring• MRC• 802.11ax beamforming• 20-, 40-, 80-, and 160-MHz channels• PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)• 802.11 DFS• CSD support |
| 802.11n version 2.0 (and related) capabilities | • 4x4 MIMO with four spatial streams• Maximal Ratio Combining (MRC)• 802.11n and 802.11a/g beamforming• 20- and 40-MHz channels• PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)• 802.11 Dynamic Frequency Selection (DFS)• Cyclic Shift Diversity (CSD) support |
| Available transmit power settings | 2.4 GHz• 23 dBm (200 mW)• 20 dBm (100 mW)• 17 dBm (50 mW)• 14 dBm (25 mW)• 11 dBm (12.5 mW)• 8 dBm (6.25 mW)• 5 dBm (3.13 mW)• 2 dBm (1.56 mW)• -1dBm (0.79mW)• -4dBm(0.39mW)5 GHz• 26 dBm (400 mW)• 23 dBm (200 mW)• 20 dBm (100 mW)• 17 dBm (50 mW)• 14 dBm (25 mW)• 11 dBm (12.5 mW)• 8 dBm (6.25 mW)• 5 dBm (3.13 mW)• 2 dBm (1.56 mW)• -1dBm (0.79mW) |
| Description | Cisco Catalyst 9120AXE Series, A Domain |
| Dimensions (W x L x H) | • Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7" (21.6 x 21.6 x 4.3 cm), C9120E andC9120P: 8.5 x 8.05x 2.0" (21.6 x 21.6 x 5.1 cm) |
| Environmental | Cisco Catalyst 9120AXI• Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)• Nonoperating (storage) altitude test: 25˚C, 15,000 ft.• Operating temperature: 32° to 122°F (0° to 50°C)• Operating humidity: 10% to 90% (noncondensing)• Operating altitude test: 40˚C, 9843 ft.Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet;however, the USB interface will remain enabledCisco Catalyst 9120AXE and 9120AXP• Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)• Nonoperating (storage) altitude test: 25˚C, 15,000 ft.• Operating temperature: -4° to 122°F (-20° to 50°C)• Operating humidity: 10% to 90% (noncondensing)• Operating altitude test: 40˚C, 9843 ft. |
| External antenna (sold separately) | • Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)• Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz)with the AIR-ANT2513-P4M-N= antenna• Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety ofdeployment scenarios• Supports Self-Identifiable Antennas (SIA) on one RP-TNC port |
| Frequency band and 20-MHz operating channels | A (A regulatory domain):• 2.412 to 2.462 GHz; 11 channels• 5.180 to 5.320 GHz; 8 channels• 5.500 to 5.700 GHz; 8 channels(excludes 5.600 to 5.640 GHz)• 5.745 to 5.825 GHz; 5 channels |
| Indicators | • Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Input power requirements | • 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE®)• Cisco power injector, AIR-PWRINJ6=• 802.3af PoE• Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
| Integrated antenna | Flexible radio (either on 2.4GHz or on 5GHz)• 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth• 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuthDedicated 5GHz radio• 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
| Interfaces | • 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45)–IEEE 802.3bz • Management console port (RJ-45)• USB 2.0 @ 3.75W (enabled via future software) |
| Smart antenna connector | • Available on the 9120E and on the 9120P only• Compact multi RF connector with DART interface• Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNCconnector• Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless SecurityMonitoring radio |
| Software | • Cisco Unified Wireless Network Software Release 8.9.x or later• Cisco IOS® XE Software Release 16.11 with AP Device Pack, or later |
| Supported wireless LAN controllers | • Cisco Catalyst 9800 Series Wireless Controllers• Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
| System memory | • 2048 MB DRAM• 1024 MB flash |
| Warranty | Limited lifetime hardware warranty |
Теги: C9120AXE-A Cisco