0
 0
  +7 (812) 309 34 73

по будням с 10:00 до 18:00

C9117AXI-I

Производитель: Cisco
Код товара: C9117AXI-I - Cisco Catalyst 9100 Access Point
0 отзывов
Артикул:
C9117AXI-I
По запросу
Сроки: 14 дней
Нашли дешевле?

+7 (812) 309 34 73. Договоримся!

Характеристики
802.11ac •8x8 downlink MU-MIMO with eight spatial streams•MRC•802.11ac beamforming•20-, 40-, 80-, and 160-MHz channels• PHY data rates up to 3.5 Gbps at 5 GHz•Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)•CSD support
802.11ax •8x8 MIMO with eight spatial streams for 5-GHz band•4x4 MIMO with four spatial streams for 2.4-GHz band•Downlink OFDMA•TWT•MRC•802.11ax beamforming•20-, 40-, 80, and 160-MHz channels•PHY data rates up to 5 Gbps at 5 GHz•Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)•CSD support
802.11n version 2.0 (and related) capabilities •8x8 MIMO with four spatial streams for 5-GHz band•4x4 MIMO with four spatial streams for 2.4-GHz band•Maximal Ratio Combining (MRC)•20- and 40-MHz channels• PHY data rates up to 600 Mbps (40 MHz with 5 GHz)•Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)•Cyclic Shift Diversity (CSD) support
Available transmit power settings 2.4 GHz•23 dBm (200 mW)•20 dBm (100 mW)•17 dBm (50 mW)•14 dBm (25 mW)•11 dBm (12.5 mW)•8 dBm (6.25 mW)•5 dBm (3.13 mW)•2 dBm (1.56 mW)• -1 dBm (0.78 mW)• -4 dBm (0.4 mW)• -6 dBm (0.25 mW)5 GHz•26 dBm (400 mW)•23 dBm (200 mW)•20 dBm (100 mW)•17 dBm (50 mW)•14 dBm (25 mW)•11 dBm (12.5 mW)•8 dBm (6.25 mW)•5 dBm (3.13 mW)•2 dBm (1.56 mW)•-1 dBm (0.78 mW)•-4 dBm (0.4 mW)
Description Cisco Catalyst 9117AX Series, I Domain
Dimensions (W x L x H) • Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)•Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)
Environmental •Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)•Nonoperating (storage) altitude test: 25˚C, 15,000 ft.•Operating temperature: 32° to 122°F (0° to 50°C)•Operating humidity: 10% to 90% (noncondensing)•Operating altitude test: 40˚C, 9843 ft.
Frequency band and 20-MHz operating channels I (I regulatory domain):• 2.412 to 2.472 GHz; 13 channels•5.180 to 5.320 GHz; 8 channels
Indicators • SStatus LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Input power requirements •802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)•Cisco power injector, AIR-PWRINJ6=•802.3af PoE•Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off.
Integrated antenna • 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth•5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth
Interfaces •1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz•Management console port (RJ-45)•USB 2.0 with up to 3.75W (enabled via future software)
Software •Cisco Unified Wireless Network Software Release 8.9 or later•Cisco IOS ® XE Software Release 16.11or later
Supported wireless LAN controllers •Cisco Catalyst 9800 Series Wireless Controllers•Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
System memory •2048 MB DRAM•1024 MB flash
  Написать отзыв

Теги: C9117AXI-I Cisco