+7 (812) 309 34 73. Договоримся!
The Cisco® 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of 100G transceiver modules solution based on a QSFP form factor.
Quick Specs
Table 1 shows the Quick Specs.
|
Product Code |
QSFP-4SFP25G-CU1M |
|
Description |
Cisco 100GBase QSFP to 4xSFP25G Passive Copper Splitter Cable, 1-meter |
|
Dimensions |
13.5 x 18.4 x 72.4 mm |
|
Nominal Wavelength (nm) |
\ |
|
Cable Type |
Direct-attach copper cable assembly |
|
Core Size (Microns) |
\ |
|
Modal Bandwidth (MHz*km) |
\ |
|
Cable Distance |
1m |
|
Power Consumption (W) |
1.5 |
|
Pull Tab Color |
Beige |
Product Details
QSFP-100G Optical modules provide these highlights:
•Hot-swappable input/output device that plugs into a 100G Gigabit Ethernet Cisco QSFP port
•Interoperable with other IEEE-compliant 100GBASE interfaces where applicable
•Certified and tested on Cisco QSFP-100G ports for superior performance, quality, and reliability
•High-speed electrical interface compliant to IEEE 802.3bm
Platform support
Table 2 shows the supported platforms
|
Supported platform |
Recommended Model |
|
Cisco Switch Catalyst 9500 |
C9500-32C |
|
Cisco Nexus 9300 Series |
N9K-C93180YC-EX |
|
N9K-C93180YC-FX |
|
|
N9K-C9348GC-FXP |
|
|
N9K-C9336C-FX2 |
|
|
N9K-C93108TC-EX |
|
|
N9K-C93180LC-EX |
|
|
N9K-C93108TC-FX |
|
|
N9K-C93600CD-GX |
|
|
Cisco Nexus 3000 Series |
N3K-C3232C |
|
N3K-C36180YC-R |
|
|
N3K-C3636C-R |
|
|
N3K-C3264C-E |
|
|
N3K-C3132C-Z |
|
|
N3K-C34180YC |
|
|
N3K-C3464C |
|
|
Cisco Nexus 9500 Series |
N9K-X9636C-R |
|
N9K-X9636C-RX |
|
|
N9K-C92160YC-X |
|
|
N9K-C9236C |
Compare to Similar Items
Table 3 shows the comparison.
|
Product Code |
QSFP-4SFP25G-CU1M |
QSFP-4SFP25G-CU2M |
QSFP-4SFP25G-CU3M |
QSFP-4SFP25G-CU5M |
|
Description |
Cisco 100GBase QSFP to 4xSFP25G Passive Copper Splitter Cable, 1-meter |
Cisco 100GBase QSFP to 4xSFP25G Passive Copper Splitter Cable, 2-meter |
Cisco 100GBase QSFP to 4xSFP25G Passive Copper Splitter Cable, 3-meter |
Cisco 100GBase QSFP to 4xSFP25G Passive Copper Splitter Cable, 5-meter |
|
Nominal Wavelength (nm) |
\ |
\ |
\ |
\ |
|
Cable Type |
Direct-attach copper cable assembly |
Direct-attach copper cable assembly |
Direct-attach copper cable assembly |
Direct-attach copper cable assembly |
|
Core Size (Microns) |
\ |
\ |
\ |
\ |
|
Modal Bandwidth (MHz*km) |
\ |
\ |
\ |
\ |
|
Cable Distance |
1m |
2m |
3m |
5m |
|
Power Consumption (W) |
1.5 |
1.5 |
1.5 |
1.5 |
|
Pull Tab Color |
Beige |
Brown |
Orange |
Gray |
Get More Information
Do you have any question about the QSFP-4SFP25G-CU1M?
Contact us now via Live Chat or info@itg-spb.ru.
QSFP-4SFP25G-CU1M Specification |
|
|
Description |
Cisco 100GBase QSFP to 4xSFP25G Passive Copper Splitter Cable, 1-meter |
|
Dimensions |
13.5 x 18.4 x 72.4 mm |
|
QSFP Port cabling specifications |
|
|
Nominal Wavelength (nm) |
\ |
|
Cable Type |
Direct-attach copper cable assembly |
|
Core Size (Microns) |
\ |
|
Modal Bandwidth (MHz*km)*1 |
\ |
|
Cable Distance |
1m |
|
Power Consumption (W) |
1.5 |
|
Pull Tab Color |
Beige |
|
*1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm |
|
|
Environmental Conditions and Power Requirements |
|
|
Commercial temperature |
0 to 70°C (32 to 158°F) |
|
Storage temperature |
-40 to 85°C (-40 to 185°F) |
|
Regulatory and Standards compliance |
|
|
Standards |
•SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) - Rev 1.8 May 10, 2013 •SFF-8636: Common Management Interface - DRAFT Rev 1.9 May 12, 2014 •802.3™-2012 IEEE Standard for Ethernet •IEEE 802.3ba Amendment of IEEE Std 802.3-2012 •IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014) •GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable •GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies •GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment •GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors •RoHS 6 |
|
Safety |
•Cable jacket of QSFP copper modules is UL E116441 Compliant •QSFP copper cables are ELV compliant |
| Характеристики | |
| -40 to 85°C (-40 to 185°F) | Regulatory and Standards compliance |
| 0 to 70°C (32 to 158°F) | Storage temperature |
| 1.5 | Pull Tab Color |
| 1m | Power Consumption (W) |
| Beige | *1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm |
| Description | Cisco 100GBase QSFP to 4xSFP25G Passive Copper Splitter Cable, 1-meter |
| Dimensions | 13.5 x 18.4 x 72.4 mm |
| Direct-attach copper cable assembly | Core Size (Microns) |
| Environmental Conditions and Power Requirements | Commercial temperature |
| QSFP Port cabling specifications | Nominal Wavelength (nm) |
| Safety | •Cable jacket of QSFP copper modules is UL E116441 Compliant•QSFP copper cables are ELV compliant |
| Standards | •SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) - Rev 1.8 May 10, 2013•SFF-8636: Common Management Interface - DRAFT Rev 1.9 May 12, 2014•802.3™-2012 IEEE Standard for Ethernet•IEEE 802.3ba Amendment of IEEE Std 802.3-2012•IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014)•GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable•GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies•GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment•GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors•RoHS 6 |
| \ | Cable Distance |
Теги: QSFP-4SFP25G-CU1M Cisco