+7 (812) 309 34 73. Договоримся!
The Cisco® 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of 100G transceiver modules solution based on a QSFP form factor.
Quick Specs
Table 1 shows the Quick Specs.
|
Product Code |
QSFP-100G-SM-SR= |
|
Description |
Cisco 100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C |
|
Dimensions |
13.5 x 18.4 x 72.4 mm |
|
Nominal Wavelength (nm) |
1271, 1291, 1311, 1331 |
|
Cable Type |
SMF |
|
Core Size (Microns) |
G.652 |
|
Modal Bandwidth (MHz*km) |
\ |
|
Cable Distance |
2km |
|
Power Consumption (W) |
3.5 |
|
Pull Tab Color |
Green |
Product Details
QSFP-100G Optical modules provide these highlights:
•Hot-swappable input/output device that plugs into a 100G Gigabit Ethernet Cisco QSFP port
•Interoperable with other IEEE-compliant 100GBASE interfaces where applicable
•Certified and tested on Cisco QSFP-100G ports for superior performance, quality, and reliability
•High-speed electrical interface compliant to IEEE 802.3bm
Compare to Similar Items
Table 2 shows the comparison.
|
Product Code |
QSFP-100G-CWDM4-S= |
QSFP-100G-ER4L-S= |
QSFP-100G-LR4-S= |
QSFP-100G-PSM4-S= |
QSFP-100G-SM-SR= |
QSFP-100G-SR4-S= |
QSFP-40/100-SRBD= |
|
Description |
Cisco 100GBASE CWDM4 QSFP Transceiver, LC, 2km over SMF |
Cisco 100GBASE QSFP Transceiver, 40KM reach over SMF, Duplex LC |
100GBASE LR4 QSFP Transceiver, LC, 10km over SMF |
100GBASE PSM4 QSFP Transceiver, MPO, 500m over SMF |
Cisco 100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C |
100GBASE SR4 QSFP Transceiver, MPO, 100m over OM4 MMF |
100G and 40GBASE SR-BiDi QSFP Transceiver, LC, 100m OM4 MMF |
|
Dimensions |
13.5 x 18.4 x 72.4 mm |
13.5 x 18.4 x 72.4 mm |
13.5 x 18.4 x 72.4 mm |
13.5 x 18.4 x 72.4 mm |
13.5 x 18.4 x 72.4 mm |
13.5 x 18.4 x 72.4 mm |
13.5 x 18.4 x 72.4 mm |
|
Nominal Wavelength (nm) |
1271, 1291, 1311, 1331 |
1295, 1300, 1304, 1309 |
1295, 1300, 1304, 1309 |
1310 |
1271, 1291, 1311, 1331 |
850 |
855, 908 |
|
Cable Type |
SMF |
SMF |
SMF |
SMF |
SMF |
MMF |
MMF |
|
Core Size (Microns) |
G.652 |
G.652 |
G.652 |
G.652 |
G.652 |
50.0 50.0 |
50.0 50.0 |
|
Modal Bandwidth (MHz*km) |
\ |
\ |
\ |
\ |
\ |
2000 (OM3) 4700 (OM4) |
2000 (OM3) 4700 (OM4) |
|
Cable Distance |
2km |
40km (with host FEC) 30km (without host FEC) |
10km |
500m |
2km |
70m 100m |
70m 100m |
|
Power Consumption (W) |
3.5 |
4.5 |
4.0 |
3.5 |
3.5 |
3.5 |
3.5 |
|
Pull Tab Color |
Green |
Rad |
Blue |
Orange |
Green |
Beige |
Gray |
Get More Information
Do you have any question about the QSFP-100G-SM-SR=?
Contact us now via Live Chat or info@itg-spb.ru.
QSFP-100G-SM-SR= Specification |
|
|
Description |
Cisco 100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C |
|
Dimensions |
13.5 x 18.4 x 72.4 mm |
|
QSFP Port cabling specifications |
|
|
Nominal Wavelength (nm) |
1271, 1291, 1311, 1331 |
|
Cable Type |
SMF |
|
Core Size (Microns) |
G.652 |
|
Modal Bandwidth (MHz*km)*1 |
\ |
|
Cable Distance |
2km |
|
Power Consumption (W) |
3.5 |
|
Pull Tab Color |
Green |
|
*1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm |
|
|
Optical characteristics |
|
|
Transmit Power (dBm) per lane*2 |
Max:+2.5 Min:-6.9 |
|
Receive Power (dBm) per lane*2*3 |
Max:+2.5 Min: -11.1 |
|
Receive Power (dBm) per lane |
Four lanes: 1271, 1291, 1311, 1331 |
|
*2 Transmitter and receiver power is average optical power, unless specified *3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation |
|
|
Environmental Conditions and Power Requirements |
|
|
Commercial temperature |
+10 to 60°C (50 to 140°F) |
|
Storage temperature |
-40 to 85°C (-40 to 185°F) |
|
Regulatory and Standards compliance |
|
|
Standards |
•SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) - Rev 1.8 May 10, 2013 •SFF-8636: Common Management Interface - DRAFT Rev 1.9 May 12, 2014 •802.3™-2012 IEEE Standard for Ethernet •IEEE 802.3ba Amendment of IEEE Std 802.3-2012 •IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014) •GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable •GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies •GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment •GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors •RoHS 6 |
|
Safety |
•Cable jacket of QSFP copper modules is UL E116441 Compliant •QSFP copper cables are ELV compliant |
| Характеристики | |
| +10 to 60°C (50 to 140°F) | Storage temperature |
| -40 to 85°C (-40 to 185°F) | Regulatory and Standards compliance |
| 1271, 1291, 1311, 1331 | Cable Type |
| 2km | Power Consumption (W) |
| 3.5 | Pull Tab Color |
| Description | Cisco 100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C |
| Dimensions | 13.5 x 18.4 x 72.4 mm |
| Environmental Conditions and Power Requirements | Commercial temperature |
| Four lanes: 1271, 1291, 1311, 1331 | *2 Transmitter and receiver power is average optical power, unless specified*3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation |
| G.652 | Modal Bandwidth (MHz*km)*1 |
| Green | *1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm |
| Max:+2.5Min: -11.1 | Receive Power (dBm) per lane |
| Max:+2.5Min:-6.9 | Receive Power (dBm) per lane*2*3 |
| Optical characteristics | Transmit Power (dBm) per lane*2 |
| QSFP Port cabling specifications | Nominal Wavelength (nm) |
| Safety | •Cable jacket of QSFP copper modules is UL E116441 Compliant•QSFP copper cables are ELV compliant |
| SMF | Core Size (Microns) |
| Standards | •SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) - Rev 1.8 May 10, 2013•SFF-8636: Common Management Interface - DRAFT Rev 1.9 May 12, 2014•802.3™-2012 IEEE Standard for Ethernet•IEEE 802.3ba Amendment of IEEE Std 802.3-2012•IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014)•GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable•GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies•GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment•GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors•RoHS 6 |
| \ | Cable Distance |
Теги: QSFP-100G-SM-SR= Cisco