+7 (812) 309 34 73. Договоримся!
The Cisco Firepower 4100 Series is a family of four threat-focused NGFW security platforms. Their throughput range addresses data center and internet edge use cases. They deliver superior threat defense, at faster speeds, with a smaller footprint. Cisco Firepower 4100 Series supports flow-offloading, programmatic orchestration, and the management of security services with RESTful APIs. FPR4110-AMP-K9 stands for Cisco Firepower 4110 AMP Appliance. 1U. 2 x NetMod Bays.
Quick Spec
Figure 1 shows the appearance of FPR4110-AMP-K9.
Table 1 shows the quick spec.
|
Product Number |
FPR4110-AMP-K9 |
|
Product Description |
Cisco Firepower 4110 AMP Appliance. 1U. 2 x NetMod Bays |
|
Performance and Capabilities on Firepower Appliances |
|
|
Stateful inspection firewall throughput |
35 Gbps |
|
Stateful inspection firewall throughput (multiprotocol) |
15 Gbps |
|
Concurrent firewall connections |
10 million |
|
Firewall latency (UDP 64B microseconds) |
3.5 |
|
New connections per second |
150,000 |
|
IPsec VPN throughput (450B UDP L2L test) |
8 Gbps |
|
IPsec/Cisco AnyConnect/Apex site-to-site VPN peers |
10,000 |
|
Maximum number of VLANs |
1024 |
|
Hardware Specifications |
|
|
Dimensions (H x W x D) |
1.75 x 16.89 x 29.7 in. (4.4 x 42.9 x 75.4 cm) |
|
Form factor (rack units) |
1RU |
|
Security module slots |
- |
|
I/O module slots |
2 |
Compare to Similar Items
Table 2 shows the comparison between FPR4110-AMP-K9 and FPR4120-AMP-K9.
|
Product Number |
FPR4110-AMP-K9 |
FPR4120-AMP-K9 |
|
Product Description |
Cisco Firepower 4110 AMP Appliance. 1U. 2 x NetMod Bays |
Cisco Firepower 4120 AMP Appliance. 1U. 2 x NetMod Bays |
|
Performance and Capabilities on Firepower Appliances |
||
|
Stateful inspection firewall throughput |
35 Gbps |
60 Gbps |
|
Stateful inspection firewall throughput (multiprotocol) |
15 Gbps |
30 Gbps |
|
Concurrent firewall connections |
10 million |
15 million |
Get more information
Do you have any question about the FPR4110-AMP-K9?
Contact us now via Live Chat or info@itg-spb.ru.
FPR4110-AMP-K9 Specification |
||
|
Product Number |
FPR4110-AMP-K9 |
|
|
Product Description |
Cisco Firepower 4110 AMP Appliance. 1U. 2 x NetMod Bays |
|
|
Cisco Firepower 4110 Specification |
||
|
Performance and Capabilities on Firepower Appliances |
||
|
Stateful inspection firewall throughput |
35 Gbps |
|
|
Stateful inspection firewall throughput (multiprotocol) |
15 Gbps |
|
|
Concurrent firewall connections |
10 million |
|
|
Firewall latency (UDP 64B microseconds) |
3.5 |
|
|
New connections per second |
150,000 |
|
|
IPsec VPN throughput (450B UDP L2L test) |
8 Gbps |
|
|
IPsec/Cisco AnyConnect/Apex site-to-site VPN peers |
10,000 |
|
|
Maximum number of VLANs |
1024 |
|
|
Security contexts (included; maximum) |
10; 250 |
|
|
High availability |
Active/active and active/standby |
|
|
Clustering |
Up to 16 appliances |
|
|
Scalability |
VPN Load Balancing, Firewall Clustering |
|
|
Centralized management |
Centralized configuration, logging, monitoring, and reporting are performed by Cisco Security Manager or alternatively in the cloud with Cisco Defense Orchestrator |
|
|
Adaptive Security Device Manager |
Web-based, local management for small-scale deployments |
|
|
Hardware Specifications |
||
|
Dimensions (H x W x D) |
1.75 x 16.89 x 29.7 in. (4.4 x 42.9 x 75.4 cm) |
|
|
Form factor (rack units) |
1RU |
|
|
Security module slots |
- |
|
|
I/O module slots |
2 |
|
|
Supervisor |
Cisco Firepower 4000 Supervisor with 8 x 10 Gigabit Ethernet ports and 2 Network Module (NM) slots for I/O expansion |
|
|
Network modules |
● 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network modules ● 4 x 40 Gigabit Ethernet Quad SFP+ network modules ● 8-port 1Gbps copper, FTW (fail to wire) Network Module Note: Firepower 4100 Series appliances may also be deployed as dedicated threat sensors, with fail-to-wire network modules. Please contact your Cisco representative for details. |
|
|
Maximum number of interfaces |
Up to 24 x 10 Gigabit Ethernet (SFP+) interfaces; up to 8 x 40 Gigabit Ethernet (QSFP+) interfaces with 2 network modules |
|
|
Integrated network management ports |
1 x Gigabit Ethernet copper port |
|
|
Serial port |
1 x RJ-45 console |
|
|
USB |
1 x USB 2.0 |
|
|
Storage |
200 GB |
|
|
Power supplies |
Configuration |
Single 1100W AC, dual optional. Single/dual 950W DC optional |
|
AC input voltage |
100 to 240V AC |
|
|
AC maximum input current |
13A |
|
|
AC maximum output power |
1100W |
|
|
AC frequency |
50 to 60 Hz |
|
|
AC efficiency |
>92% at 50% load |
|
|
DC input voltage |
-40V to -60VDC |
|
|
DC maximum input current |
27A |
|
|
DC maximum output power |
950W |
|
|
DC efficiency |
>92.5% at 50% load |
|
|
Redundancy |
1+1 |
|
|
Fans |
6 hot-swappable fans |
|
|
Noise |
78 dBA |
|
|
Rack mountable |
Yes, mount rails included (4-post EIA-310-D rack) |
|
|
Weight |
36 lb (16 kg): 2 x power supplies, 2 x NMs, 6x fans; 30 lb (13.6 kg): no power supplies, no NMs, no fans |
|
|
Temperature: operating |
32 to 104°F |
|
|
Temperature: nonoperating |
-40 to 149°F (-40 to 65°C) |
|
|
Humidity: operating |
5 to 95% noncondensing |
|
|
Humidity: nonoperating |
5 to 95% noncondensing |
|
|
Altitude: operating |
10,000 ft (max) |
|
|
Altitude: nonoperating |
40,000 ft (max) |
|
| Характеристики | |
| - | I/O module slots |
| 1 x Gigabit Ethernet copper port | Serial port |
| 1 x RJ-45 console | USB |
| 1 x USB 2.0 | Storage |
| 1.75 x 16.89 x 29.7 in. (4.4 x 42.9 x 75.4 cm) | Form factor (rack units) |
| 1RU | Security module slots |
| 2 | Supervisor |
| 200 GB | Power supplies |
| AC efficiency | >92% at 50% load |
| AC Frequency | 50 to 60 Hz |
| AC input voltage | 100 to 240V AC |
| AC maximum input current | 13A |
| AC maximum output power | 1100W |
| Adaptive Security Device Manager | Web-based, local management for small-scale deployments |
| Altitude: nonoperating | 40,000 ft (max) |
| Altitude: operating | 10,000 ft (max) |
| Centralized management | Centralized configuration, logging, monitoring, and reporting are performed by Cisco Security Manager or alternatively in the cloud with Cisco Defense Orchestrator |
| Cisco Firepower 4000 Supervisor with 8 x 10 Gigabit Ethernet por | Network modules |
| Cisco Firepower 4110 Specification | Performance and Capabilities on Firepower Appliances |
| Clustering | Up to 16 appliances |
| Concurrent firewall connections | 10 million |
| Configuration | Single 1100W AC, dual optional. Single/dual 950W DC optional |
| DC efficiency | >92.5% at 50% load |
| DC input voltage | -40V to -60VDC |
| DC maximum input current | 27A |
| DC maximum output power | 950W |
| Fans | 6 hot-swappable fans |
| Firewall latency (UDP 64B microseconds) | 3.5 |
| Hardware Specifications | Dimensions (H x W x D) |
| High Availability | Active/active and active/standby |
| Humidity: nonoperating | 5 to 95% noncondensing |
| Humidity: operating | 5 to 95% noncondensing |
| IPsec VPN throughput (450B UDP L2L test) | 8 Gbps |
| IPsec/Cisco AnyConnect/Apex site-to-site VPN peers | 10,000 |
| Maximum number of VLANs | 1024 |
| New connections per second | 150,000 |
| Noise | 78 dBA |
| Product Description | Cisco Firepower 4110 AMP Appliance. 1U. 2 x NetMod Bays |
| Product Number | FPR4110-AMP-K9 |
| Rack mountable | Yes, mount rails included (4-post EIA-310-D rack) |
| Redundancy | 1+1 |
| Scalability | VPN Load Balancing, Firewall Clustering |
| Security contexts (included; maximum) | 10; 250 |
| Stateful inspection firewall throughput | 35 Gbps |
| Stateful inspection firewall throughput (multiprotocol) | 15 Gbps |
| Temperature: nonoperating | -40 to 149°F (-40 to 65°C) |
| Temperature: operating | 32 to 104°F(0 to 40°C) |
| Up to 24 x 10 Gigabit Ethernet (SFP+) interfaces; up to 8 x 40 G | Integrated network management ports |
| Weight | 36 lb (16 kg): 2 x power supplies, 2 x NMs, 6x fans; 30 lb (13.6 kg): no power supplies, no NMs, no fans |
| ● 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable | Maximum number of interfaces |
Теги: FPR4110-AMP-K9 Cisco