+7 (812) 309 34 73. Договоримся!
The Cisco Firepower 2100 Series is a family of four threat-focused NGFW security platforms that deliver business resiliency through superior threat defense. It offers exceptional sustained performance when advanced threat functions are enabled. These platforms uniquely incorporate an innovative dual multicore CPU architecture that optimizes firewall, cryptographic, and threat inspection functions simultaneously. The series’ firewall throughput range addresses use cases from the Internet edge to the data center. Network Equipment Building Standards (NEBS)- compliance is supported by the Cisco Firepower 2100 Series platform. The FPR2140-NGFW-K9 stands for Cisco Firepower 2140 NGFW Appliance, 1RU, 1 x Network Module Bays.
Quick Spec
Figure 1 shows the appearance of FPR2140-NGFW-K9.
Table 1 shows the quick spec.
|
Product Number |
FPR2140-NGFW-K9 |
|
Product Description |
Cisco Firepower 2140 NGFW Appliance, 1RU, 1 x Network Module Bays |
|
Dimensions (H x W x D) |
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
|
Form factor (rack units) |
1RU |
|
I/O module slots |
1 NM slot |
|
Integrated I/O |
12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces |
|
Network modules |
(FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module |
|
Maximum number of interfaces |
Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+) |
|
Integrated network management ports |
1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) |
|
Serial port |
1 x RJ-45 console |
|
USB |
1 x USB 2.0 Type-A (500mA) |
|
Storage |
1x 200 GB, 1x spare slot (for MSP) |
Product Details
Figure 2 shows the front panel of FPR2140-NGFW-K9.
Note:
|
① |
Power LED |
|
② |
Locator beacon |
|
③ |
System LEDs |
|
④ |
Type A USB 2.0 port |
|
⑤ |
RJ-45 console port |
|
⑥ |
Gigabit Ethernet management port: l Firepower Threat Defense—Management 0 (also referred to as Management 1/1 and Diagnostic 1/1) l ASA—Management 1/1 |
|
⑦ |
12 RJ-45 1G/100M/10M auto duplex/auto MDI-X Base-T ports Ethernet 1/1 through 1/12 labeled top to bottom, left to right |
|
⑧ |
Pullout label card with chassis serial number |
|
⑨ |
SSD 1 |
|
⑩ |
4 fixed SFP+ (1G/10G) ports Fiber ports 1/13 through 1/16 labeled left to right |
|
⑪ |
Network Module (network module slot 1) |
|
⑫ |
SSD 2 |
Figure 3 shows the rear panel of FPR2140-ASA-K9.
Note:
|
① |
Power on/off switch |
|
② |
Power supply module 1 FAIL LED |
|
③ |
Power supply module 2 FAIL LED |
|
④ |
Power supply module 1 |
|
⑤ |
Power supply module 1 OK LED |
|
⑥ |
Fan tray |
|
⑦ |
Power supply module 2 |
|
⑧ |
Power supply module 2 OK LED |
|
⑨ |
2-post grounding lug |
Compare to Similar Items
Table 2 shows the comparison between FPR2140-NGFW-K9 and FPR2120-NGFW-K9.
|
Product Number |
FPR2140-NGFW-K9 |
FPR2120-NGFW-K9 |
|
Product Description |
Cisco Firepower 2140 NGFW Appliance, 1RU,1 x Network Module Bays |
Cisco Firepower 2120 NGFW Appliance, 1RU |
|
Dimensions (H x W x D) |
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
|
Form factor (rack units) |
1RU |
1RU |
|
I/O module slots |
1 NM slot |
0 |
|
Integrated I/O |
12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces |
12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 1 Gigabit (SFP) Ethernet interfaces |
|
Network modules |
(FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module |
None |
|
Maximum number of interfaces |
Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+) |
Up to 16 total Ethernet ports |
|
Storage |
1x 200 GB, 1x spare slot (for MSP) |
1x 100 GB, 1x spare slot (for MSP) |
Get more information
Do you have any question about the FPR2140-NGFW-K9?
Contact us now via Live Chat or info@itg-spb.ru.
FPR2140-NGFW-K9 Specification |
||
|
Product Number |
FPR2140-NGFW-K9 |
|
|
Product Description |
Cisco Firepower 2140 NGFW Appliance, 1RU, 1 x Network Module Bays |
|
|
Hardware Specifications |
||
|
Dimensions (H x W x D) |
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
|
|
Form factor (rack units) |
1RU |
|
|
I/O module slots |
1 NM slot |
|
|
Integrated I/O |
12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces |
|
|
Network modules |
(FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module |
|
|
Maximum number of interfaces |
Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+) |
|
|
Integrated network management ports |
1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) |
|
|
Serial port |
1 x RJ-45 console |
|
|
USB |
1 x USB 2.0 Type-A (500mA) |
|
|
Storage |
1x 200 GB, 1x spare slot (for MSP) |
|
|
Power supplies |
Configuration |
Dual 400W AC. Single/dual 350W DC optional |
|
AC input voltage |
100 to 240V AC |
|
|
AC maximum input current |
< 6A at 100V |
|
|
AC maximum output power |
400W |
|
|
AC frequency |
50 to 60 Hz |
|
|
AC efficiency |
>89% at 50% load |
|
|
DC input voltage |
-48V to -60VDC |
|
|
DC maximum input current |
< 12.5A at -48V |
|
|
DC maximum output power |
350W |
|
|
DC efficiency |
>88% at 50% load |
|
|
Redundancy |
1+1 AC or DC with dual supplies |
|
|
Fans |
1 hot-swappable fan module (with 4 fans) |
|
|
Noise |
56 dBA @ 25C 77 dBA at highest system performance. |
|
|
Rack mountable |
Yes. Mount rails included (4-post EIA-310-D rack) |
|
|
Weight |
21 lb (9.53 kg) 2 x power supplies, 1 x NM, 1 x fan module, 2x SSDs |
|
|
Temperature: operating |
32 to 104°F (0 to 40°C) |
|
|
Temperature: nonoperating |
-4 to 149°F (-20 to 65°C) |
|
|
Humidity: operating |
10 to 85% noncondensing |
|
|
Humidity: nonoperating |
5 to 95% noncondensing |
|
|
Altitude: operating |
10,000 ft (max) |
|
|
Altitude: nonoperating |
40,000 ft (max) |
|
| Характеристики | |
| (FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Facto | Maximum number of interfaces |
| 1 NM slot | Integrated I/O |
| 1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) | Serial port |
| 1 x RJ-45 console | USB |
| 1 x USB 2.0 Type-A (500mA) | Storage |
| 1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) | Form factor (rack units) |
| 12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigab | Network modules |
| 1RU | I/O module slots |
| 1x 200 GB, 1x spare slot (for MSP) | Power supplies |
| AC efficiency | >89% at 50% load |
| AC Frequency | 50 to 60 Hz |
| AC input voltage | 100 to 240V AC |
| AC maximum input current | < 6A at 100V |
| AC maximum output power | 400W |
| Altitude: nonoperating | 40,000 ft (max) |
| Altitude: operating | 10,000 ft (max) |
| Configuration | Dual 400W AC. Single/dual 350W DC optional |
| DC efficiency | >88% at 50% load |
| DC input voltage | -48V to -60VDC |
| DC maximum input current | < 12.5A at -48V |
| DC maximum output power | 350W |
| Fans | 1 hot-swappable fan module (with 4 fans) |
| Hardware Specifications | Dimensions (H x W x D) |
| Humidity: nonoperating | 5 to 95% noncondensing |
| Humidity: operating | 10 to 85% noncondensing |
| Noise | 56 dBA @ 25C77 dBA at highest system performance. |
| Product Description | Cisco Firepower 2140 NGFW Appliance, 1RU, 1 x Network Module Bays |
| Product Number | FPR2140-NGFW-K9 |
| Rack mountable | Yes. Mount rails included (4-post EIA-310-D rack) |
| Redundancy | 1+1 AC or DC with dual supplies |
| Temperature: nonoperating | -4 to 149°F (-20 to 65°C) |
| Temperature: operating | 32 to 104°F (0 to 40°C) |
| Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and netw | Integrated network management ports |
| Weight | 21 lb (9.53 kg) 2 x power supplies, 1 x NM, 1 x fan module, 2x SSDs |
Теги: FPR2140-NGFW-K9 Cisco