+7 (812) 309 34 73. Договоримся!
The Cisco Firepower 2100 Series is a family of four threat-focused NGFW security platforms that deliver business resiliency through superior threat defense. It offers exceptional sustained performance when advanced threat functions are enabled. These platforms uniquely incorporate an innovative dual multicore CPU architecture that optimizes firewall, cryptographic, and threat inspection functions simultaneously. The series’ firewall throughput range addresses use cases from the Internet edge to the data center. Network Equipment Building Standards (NEBS)- compliance is supported by the Cisco Firepower 2100 Series platform. The FPR2130-K9= stands for Firepower 2130 appliance with 1 network module bay and no power supply or fan (spare).
Quick Spec
Figure 1 shows the appearance of FPR2130-K9=.
Table 1 shows the quick spec.
|
Product Number |
FPR2130-K9= |
|
Product Description |
Firepower 2130 appliance with 1 network module bay and no power supply or fan (spare) |
|
ASA Performance and Capabilities on Firepower Appliances |
|
|
Stateful inspection firewall throughput |
10 Gbps |
|
Stateful inspection firewall throughput (multiprotocol) |
5 Gbps |
|
Concurrent firewall connections |
2 million |
|
New connections per second |
40000 |
|
Hardware Specifications |
|
|
Dimensions (H x W x D) |
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
|
Form factor (rack units) |
1RU |
|
I/O module slots |
1 NM slot |
|
Integrated I/O |
12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces |
|
Network modules |
(FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module |
|
Maximum number of interfaces |
Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+) |
|
Integrated network management ports |
1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) |
Product Details
Figure 2 shows the front panel of FPR2130-K9=.
Note:
|
① |
Power LED |
|
② |
Locator beacon |
|
③ |
System LEDs |
|
④ |
Type A USB 2.0 port |
|
⑤ |
RJ-45 console port |
|
⑥ |
Gigabit Ethernet management port: l Firepower Threat Defense—Management 0 (also referred to as Management 1/1 and Diagnostic 1/1) l ASA—Management 1/1 |
|
⑦ |
12 RJ-45 1G/100M/10M auto duplex/auto MDI-X Base-T ports Ethernet 1/1 through 1/12 labeled top to bottom, left to right |
|
⑧ |
Pullout label card with chassis serial number |
|
⑨ |
4 fixed SFP (1G) ports Fiber ports 1/13 through 1/16 labeled left to right |
|
⑩ |
SSD (slot 1) |
|
⑪ |
SSD (slot 2) |
Figure 3 shows the rear panel of FPR2130-K9=.
Note:
|
① |
Power on/off switch |
|
② |
Fixed power supply module |
|
③ |
Fixed fans |
|
④ |
2-post grounding lug |
Compare to Similar Items
Table 2 shows the comparison between FPR2130-K9= and FPR2110-K9=.
|
Product Number |
FPR2130-K9= |
FPR2110-K9= |
|
Product Description |
Firepower 2130 appliance with 1 network module bay and no power supply or fan (spare) |
Firepower 2110 appliance 1 RU with no power supply or fan (spare) |
|
Performance and Capabilities on Firepower Appliances |
||
|
Stateful inspection firewall throughput |
10 Gbps |
3 Gbps |
|
Stateful inspection firewall throughput (multiprotocol) |
5 Gbps |
1.5 Gbps |
|
Concurrent firewall connections |
2 million |
1 million |
|
New connections per second |
40000 |
18000 |
|
Hardware Specifications |
||
|
Dimensions (H x W x D) |
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
|
Form factor (rack units) |
1RU |
1RU |
Get More Information
Do you have any question about the FPR2130-K9=?
Contact us now via Live Chat or info@itg-spb.ru.
FPR2130-K9= Specification |
||
|
Product Number |
FPR2130-K9= |
|
|
Product Description |
Firepower 2130 appliance with 1 network module bay and no power supply or fan (spare) |
|
|
Performance and Capabilities on Firepower Appliances |
||
|
Stateful inspection firewall throughput |
10 Gbps |
|
|
Stateful inspection firewall throughput (multiprotocol) |
5 Gbps |
|
|
Concurrent firewall connections |
2 million |
|
|
New connections per second |
40000 |
|
|
IPsec VPN throughput (450B UDP L2L test) |
1 Gbps |
|
|
IPsec/Cisco AnyConnect/Apex site-to-site VPN peers |
7500 |
|
|
Maximum number of VLANs |
750 |
|
|
Security contexts (included; maximum) |
2; 30 |
|
|
High availability |
Active/active and active/standby |
|
|
Scalability |
VPN Load Balancing |
|
|
Centralized management |
Centralized configuration, logging, monitoring, and reporting are performed by Cisco Security Manager or alternatively in the cloud with Cisco Defense Orchestrator |
|
|
Adaptive Security Device Manager |
Web-based, local management for small-scale deployments |
|
|
Hardware Specifications |
||
|
Dimensions (H x W x D) |
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
|
|
Form factor (rack units) |
1RU |
|
|
I/O module slots |
1 NM slot |
|
|
Integrated I/O |
12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces |
|
|
Network modules |
(FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module |
|
|
Maximum number of interfaces |
Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+) |
|
|
Integrated network management ports |
1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) |
|
|
Serial port |
1 x RJ-45 console |
|
|
USB |
1 x USB 2.0 Type-A (500mA) |
|
|
Storage |
1x 200 GB, 1x spare slot (for MSP) |
|
|
Power supplies |
Configuration |
Single integrated 250W AC power supply. |
|
AC input voltage |
100 to 240V AC |
|
|
AC maximum input current |
< 6A at 100V |
|
|
AC maximum output power |
400W |
|
|
AC frequency |
50 to 60 Hz |
|
|
AC efficiency |
>89% at 50% load |
|
|
DC input voltage |
-48V to -60VDC |
|
|
DC maximum input current |
< 12.5A at -48V |
|
|
DC maximum output power |
350W |
|
|
DC efficiency |
>88% at 50% load |
|
|
Redundancy |
1+1 AC or DC with dual supplies |
|
|
Fans |
1 hot-swappable fan module (with 4 fans) |
|
|
Noise |
56 dBA @ 25C 77 dBA at highest system performance. |
|
|
Rack mountable |
Yes. Mount rails included (4-post EIA-310-D rack) |
|
|
Weight |
19.4 lb (8.8 kg) 1 x power supplies, 1 x NM, 1 x fan module, 2x SSDs |
|
|
Temperature: operating |
32 to 104°F (0 to 40°C) or NEBS operation (see below) |
|
|
Temperature: nonoperating |
-4 to 149°F (-20 to 65°C) |
|
|
Humidity: operating |
10 to 85% noncondensing |
|
|
Humidity: nonoperating |
5 to 95% noncondensing |
|
|
Altitude: operating |
10,000 ft (max) or NEBS operation (see below) |
|
|
Altitude: nonoperating |
40,000 ft (max) |
|
|
NEBS operation |
Operating altitude: 0 to 13,000 ft (3962 m) Operating temperature: Long term: 0 to 45°C, up to 6,000 ft (1829 m) Long term: 0 to 35°C, 6,000 to 13,000 ft (1829 to 3964 m) Short term: -5 to 55°C, up to 6,000 ft (1829 m) |
|
| Характеристики | |
| >88% at 50% load | Redundancy |
| >89% at 50% load | DC input voltage |
| < 12.5A at -48V | DC maximum output power |
| < 6A at 100V | AC maximum output power |
| -4 to 149°F (-20 to 65°C) | Humidity: operating |
| -48V to -60VDC | DC maximum input current |
| 1 Gbps | IPsec/Cisco AnyConnect/Apex site-to-site VPN peers |
| 1 hot-swappable fan module (with 4 fans) | Noise |
| 1+1 AC or DC with dual supplies | Fans |
| 10 Gbps | Stateful inspection firewall throughput (multiprotocol) |
| 10 to 85% noncondensing | Humidity: nonoperating |
| 10,000 ft (max) or NEBS operation (see below) | Altitude: nonoperating |
| 100 to 240V AC | AC maximum input current |
| 19.4 lb (8.8 kg) 1 x power supplies, 1 x NM, 1 x fan module, 2x | Temperature: operating |
| 2 million | New connections per second |
| 2; 30 | High availability |
| 32 to 104°F (0 to 40°C) or NEBS operation (see below) | Temperature: nonoperating |
| 350W | DC efficiency |
| 40,000 ft (max) | NEBS operation |
| 40000 | IPsec VPN throughput (450B UDP L2L test) |
| 400W | AC frequency |
| 5 Gbps | Concurrent firewall connections |
| 5 to 95% noncondensing | Altitude: operating |
| 50 to 60 Hz | AC efficiency |
| 56 dBA @ 25C77 dBA at highest system performance. | Rack mountable |
| 750 | Security contexts (included; maximum) |
| 7500 | Maximum number of VLANs |
| Active/active and active/standby | Scalability |
| Centralized configuration, logging, monitoring, and reporting ar | Adaptive Security Device Manager |
| Dimensions (H x W x D) | 1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) |
| Form factor (rack units) | 1RU |
| I/O module slots | 1 NM slot |
| Integrated I/O | 12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces |
| Integrated network management ports | 1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) |
| Maximum number of interfaces | Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+) |
| Network modules | (FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module |
| Performance and Capabilities on Firepower Appliances | Stateful inspection firewall throughput |
| Power supplies | Configuration |
| Product Description | Firepower 2130 appliance with 1 network module bay and no power supply or fan (spare) |
| Product Number | FPR2130-K9= |
| Serial port | 1 x RJ-45 console |
| Single integrated 250W AC power supply. | AC input voltage |
| Storage | 1x 200 GB, 1x spare slot (for MSP) |
| USB | 1 x USB 2.0 Type-A (500mA) |
| VPN Load Balancing | Centralized management |
| Web-based, local management for small-scale deployments | Hardware Specifications |
| Yes. Mount rails included (4-post EIA-310-D rack) | Weight |
Теги: FPR2130-K9= Cisco