+7 (812) 309 34 73. Договоримся!
Общая информация (AIR-CT8510-HA-K9)
Cisco 8500 Series Wireless Controllers are a highly scalable and flexible platform that enables mission-critical wireless networking for enterprise and service provider deployments. AIR-CT8510-HA-K9 is a High Availability AP Stateful Switchover (AP SSO) model.
Быстрые спецификацииs
На рисунке 1 показан внешний вид AIR-CT8510 controller.
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
AIR-CT8510-HA-K9 |
|
Description |
Cisco 8510 Series High Availability Wireless Controller |
|
Features (Cisco 8500 Series) |
- Supports 100,300, 500, 1000, 3000,6000 access points - Supports up to 4096 VLANs |
|
Interfaces |
- 2 x 10 Gigabit Ethernet interfaces - Small Form-Factor Pluggable (SFP) options - LED indicators: Network Link, Diagnostics - 1 x service port: 10/100/1000 Mbps Ethernet (RJ-45) |
|
Wireless |
IEEE 802.11a, 802.11b, 802.11g, 802.11d, WMM/802.11e, 802.11h, 802.11n, 802.11k, 802.11r, 802.11u, 802.11w, 802.11ac |
|
Dimensions (W x L x H) |
17.30 x 28.00 x 1.69 in. (440.0 x 711.4 x 43.0 mm) |
|
Net Weight |
35.1 lb (15.9 kg) |
Детали продукта
На рисунке 2 показана передняя панель AIR-CT8510 controller.
Note:
|
? |
Drive Bay 0 |
? |
USB 1 Connector |
|
? |
Drive Bay 2 |
? |
Optical Drive Eject Button |
|
? |
Video Connector |
? |
Optical Drive Bay |
|
? |
Power Control Button and LED |
? |
Drive Bay 3 |
|
? |
USB 2 Connector |
? |
Drive Bay 1 |
На рисунке 3 показана задняя панель AIR-CT8510 controller.
Note:
|
? |
10G Port 1 |
? |
Video Connector |
|
? |
10G Port 2 |
? |
Serial Connector |
|
? |
IMM 10/100Mbps Ethernet Port |
? |
USB Connectors |
|
? |
Service Port |
? |
Power Supply 1 |
|
? |
HA Port |
? |
Power Supply 2 |
Figure 4 shows the High Availability – AP Stateful Switchover.
In the traditional Controller AP Fail-Over model, a unique IP address for the Primary, Secondary, and Tertiary Controller was configured on each AP. When the AP’s active Controller went down, the AP went to the discovery state, and a whole joining process to a new Controller was required.
The newly introduced High Availability AP Stateful Switchover (AP SSO) model provides a Box-to-Box redundancy with one Controller in Active state and a second Controller in Hot Standby State where it monitors the health of the Active Controller via a Redundant (HA) Port.
Конфигурация on the Active Controller is synched to the Standby Controller via the Redundant Port. In HA, both controllers share the same set of configuration including the IP Address of the management interface. Furthermore, the AP's CAPWAP State (for APs in RUN state) are also synched. As a result, APs do not go into Discovery state when the Active Controller fails. This model reduces the Downtime in the case of a Box Failure to sub-second, and to up to three seconds in the case of upstream network connectivity issues (for example, Loss of Gateway).
Note: AIR-CT8510-HA-K9 is available and supports standby operation for up to 6000 APs when connected to the primary 8500 Controller.
The SFP Support
Table 2 shows some recommended SFP for this wireless controller.
|
SFP |
Description |
|
SFP-10G-SR |
10GBASE-SR SFP Module |
|
SFP-10G-LR |
10GBASE-LR SFP+ Module for SMF 10 Gbps |
|
SFP-H10GB-CU1M |
Cisco Direct-Attach Twinax Copper Cable Assembly with SFP+ Connectors, SFP-H10GB-CU1M |
|
SFP-H10GB-CU3M |
Cisco Direct-Attach Twinax Copper Cable Assembly with SFP+ Connectors, SFP-H10GB-CU3M |
|
SFP-H10GB-CU5M |
SFP-H10GB-CU5M,5M Passive Copper Twinax Cable F, Nexus,24AWG cable assembly |
Сравнить похожие товары
Table 3 shows the comparison of similar items.
|
Models |
AIR-CT8510-100-K9 |
AIR-CT8510-HA-K9 |
|
Max Access Points with licenses |
6000 |
6000 |
|
Max Client Support with licenses |
64,000 |
64,000 |
|
Ports |
2 x 10G SFP |
2 x 10G SFP |
|
Special Feature |
100 Access Points |
High Availability – AP Stateful Switchover |
Что бы получить больше информации
У вас есть какие-либо вопросы о AIR-CT8510-HA-K9?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Maximum throughput: | 10 Gbps |
| Link Aggregation Group (LAG): | Yes |
| Form factor: | 1 RU Appliance |
| Flexconnect + mesh: | Yes |
| Max WLANs: | 512 |
| Maximum access point: | 6,000 |
| Interfaces or network I/O: | Two 10 GE |
| Access control lists (ACLs): | Yes |
| Radio Resource Management (RRM): | Yes |
| Bonjour Gateway: | Yes |
| Mesh: | Yes |
| Max Power consumption: | 675W |
| Cisco VideoStream: | Yes |
| OfficeExtend: | Yes |
| Guest anchor: | Yes |
| Rendundant power: | Yes (installed) AC or DC |
| Workgroup bridge: | Yes |
| Max Number of Flex Groups: | 2,000 |
| Guest services (wireless): | Yes |
| Minimum access points: | 100 |
| Maximum RF Tag support: | 50,000 |
| QoS: | Yes |
| Application Visibility and Control (AVC): | Yes |
| HA with Client SSO: | Yes |
| Max Access Points per Group: | 100 |
| HA with AP SSO: | Yes |
| Datagram Transport Layter Security (DTLS): | Yes |
| Bi-directional rate limiting: | Yes |
| Cisco Compatible Extensions Call Admission Control (CAC)/Wi-Fi M | Yes |
| Max VLANs: | 4096 |
| Rendundant fans: | Yes |
| Integrated Wireless Policy Engine: | Yes |
| Maximum client support: | 64,000 |
| Central Mode (formerly Local Mode): | Yes |
| Max Number of access point groups: | 6,000 |
| Mobililty: | L2 & L3 |
| FlexConnect: | Yes |
Теги: AIR-CT8510-HA-K9 Cisco