+7 (812) 309 34 73. Договоримся!
Общая информация (AIR-AP2802E-H-K9)
AIR-AP2802E-H-K9 is one of the Cisco Aironet 2800 Series Access Points. This 2800 series, delivering new 802.11ac Wave 2 standard, is ideal for large enterprise organizations that rely on Wi-Fi to engage with customers. The Series is a hands-off product that’s intelligent enough to make decisions based on end-device activities and usage. AIR-AP2802E-H-K9 provides external antenna and H regulatory domain.
Быстрые спецификацииs
Table 1
Product Code |
AIR-AP2802E-H-K9 |
Frequency band and 20-MHz operating channels |
H (H regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.150 to 5.350 GHz; 8 channels - 5.745 to 5.825 GHz; 5 channels |
Antenna |
External Antenna |
Features |
- 4x4 MU-MIMO with three spatial streams - MRC - 802.11ac Beamforming - 20-, 40-, 80, 160-MHz channels - PHY data rates up to 5.2 Gbps - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
Interfaces |
- 2 x 100/1000BASE-T autosensing (RJ-45) - Management console port (RJ-45) - USB 2.0 (enabled via future software) |
System memory |
- 1024 MB DRAM - 256 MB flash |
Dimensions (W x L x H) |
8.66 x 8.77 x 2.50 in. |
Net Weight |
4.6 lb (2.09 kg) |
Детали продукта
Figure 1 shows the face of AIR-AP2802E Model.
Notes:
? |
Dual-band antenna connector A with antenna |
? |
Dual-band antenna connector C with antenna |
? |
Location of the Smart antenna connector port on the right side of the AP |
? |
Status LED |
? |
Dual-band antenna connector D with antenna |
? |
Dual-band antenna connector B with antenna |
Figure 2 shows the Smart Antenna Connector and DART cable on the AIR-AP2802E model.
The 2802E model has a Smart antenna connector, which is connected directly to the flexible radio. Without a supported external antenna connected to the Smart Antenna connector, the flexible radio can stay only in 2.4 GHz mode. If an external antenna is connected, the flexible radio can be used in the full Flexible Radio Assignment mode, allowing dual 5 GHz and Wireless Security Monitoring modes.
To connect to any supported RP-TNC connector-type external antenna to the Smart antenna connector, use the DART cable connector AIR-CAB002-DART-R=, which is to be ordered separately.
Сравнить похожие товары
В таблице 2 показано сравнение между two AP.
Models |
AIR-AP2802E-I-K9 |
AIR-AP2802E-H-K9 |
Frequency band and 20-MHz operating channels |
I (I regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels |
H (H regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.150 to 5.350 GHz; 8 channels - 5.745 to 5.825 GHz; 5 channels |
Antenna |
External Antenna |
External Antenna |
Features |
- 4x4 MU-MIMO with three spatial streams - MRC - 802.11ac Beamforming - 20-, 40-, 80, 160-MHz channels - PHY data rates up to 5.2 Gbps - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
- 4x4 MU-MIMO with three spatial streams - MRC - 802.11ac Beamforming - 20-, 40-, 80, 160-MHz channels - PHY data rates up to 5.2 Gbps - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
Что бы получить больше информации
У вас есть какие-либо вопросы о AIR-AP2802E-H-K9?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
Теги: AIR-AP2802E-H-K9