+7 (812) 309 34 73. Договоримся!
Общая информация (AIR-OEAP1810-R-K9)
AIR-OEAP1810-R-K9, providing R Regulatory Domain, is one of the Cisco Aironet 1810 Series OfficeExtend Access Points. The 1810 Series offer a highly secure enterprise wireless and wired connection to the home, micro-branch,other types of remote sites. The 1810 Series extends the corporate network to teleworkers, mobile workers and even micro-sites. The access points connect to the homesite broadband Internet access and establish a highly secure tunnel to the corporate network. This tunnel allows remote employees access to data, voice, video and cloud services for a mobility experience consistent with that at the corporate office. The 1810 Series supports highly secure access to corporate data and personal connectivity for teleworkers’ home devices, with segmented home traffic.
Быстрые спецификацииs
Таблица 1 показывает Быстрые спецификацииs of AIR-OEAP1810-R-K9.
|
Product Code |
AIR-OEAP1810-R-K9 |
|
Interfaces |
- 1 × 10/100/1000BASE-T PoE uplink port - 1 × Management console port (RJ-45) - 3 × 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port - 1 × DC power connector |
|
Features |
2x2 single-user/multiuser MIMO with two spatial streams Maximal ratio combining (MRC) 20-, 40- and 80-MHz channels PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic shift diversity (CSD) support |
|
Regulatory Domain |
R (R regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels - 5.660 to 5.805 GHz; 7 channels |
|
Integrated antennas |
- 2.4 GHz, gain 2 dBi - 5 GHz, gain 5 dBi |
|
System |
- 512 MB DRAM - 256 MB flash - 1.4 GHz system dual-core CPU |
|
Dimensions (W x L x H) |
165 x 114 x 41 mm (Access point without mounting bracket)) |
|
Weight |
560g (Access point without mounting bracketany other accessories) |
Детали продукта
Figure 1 shows the face and left side of AP.
Note:
|
? |
The Face of AP |
? |
48V DC power port |
|
? |
The Left side of AP |
? |
Kensington lock slot |
Figure 2 shows the base of the AP with the ports and connectors.
Note:
|
? |
Console port |
? |
LAN port 2 |
|
? |
Passive Pass-Through port |
? |
PSE / LAN port 1 |
|
? |
LAN port 3 |
· PSE / LAN port 1 provides 802.3af/at Power Sourcing Equipment (PSE) PoE-Out power on the LAN 1 Ethernet interface. With 802.3at input the PoE-Out is 6.95W (Class 2).With DC input the PoE-Out is 12.95W (Class 0).
Figure 3. Mounting the AP in the Cradle.
Note:
|
? |
The AP |
|
? |
The cradle kit |
|
? |
Mounting the AP in the Cradle |
· Cisco Aironet OEAP1810 series access points can be mounted on a tablehorizontal surface, using the AIR-OEAP1810-CRD= cradle kit. This kit is shipped with the access point as standard and includes a back cover and an RJ-45 jumper cable. It is also separately available from Cisco as a spare.
Figure 4 shows the AIR-OEAP1810-CRD= Cradle Views.
Note:
|
? |
AP Status LED indication when AP is mounted in the cradle |
? |
LAN 3 port |
|
? |
PSE / LAN 1 port |
? |
WAN port |
|
? |
LAN 2 port |
Сравнить похожие товары
В таблице 2 показано сравнение между two AP.
|
Models |
AIR-OEAP1810-R-K9 |
AIR-OEAP1810-S-K9 |
|
Interfaces |
- 1 × 10/100/1000BASE-T PoE uplink port - 1 × Management console port (RJ-45) - 3 × 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port - 1 × DC power connector |
- 1 × 10/100/1000BASE-T PoE uplink port - 1 × Management console port (RJ-45) - 3 × 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port - 1 × DC power connector |
|
Regulatory Domain |
R (R regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels - 5.660 to 5.805 GHz; 7 channels |
S (S regulatory domain): - 2.412 to 2.472 GHz; 13 channels - 5.180 to 5.320 GHz; 8 channels - 5.500 to 5.700 GHz; 11 channels - 5.745 to 5.825 GHz; 5 channels |
Что бы получить больше информации
У вас есть какие-либо вопросы о AIR-OEAP1810-R-K9?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Maximum number of non-overlapping channels | R (R regulatory domain): 2.412 to 2.472 GHz; 13 channels 5.180 to 5.320 GHz; 8 channels 5.660 to 5.805 GHz; 7 channels |
| Receive sensitivity (combined sensitivity) | 802.11ac (non HT80) -88 dBm @ 6 Mbps -70 dBm @ 54 Mbps |
| Bluetooth (future availability) | Integrated Bluetooth 4.1 (including BLE) radio Maximum transmit power: 5 dBm Antenna gain: 2 dBi |
| Integrated antennas | 2.4 GHz, gain 2 dBi 5 GHz, gain 4 dBi |
| System | 512 MB DRAM 256 MB flash 1.4 GHz system dual-core CPU |
| Physical security | Torx security screw, included with the access point Kensington security slot |
| Authentication and security | Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2) 802.1X, RADIUS authentication, authorization and accounting (AAA) 802.11i |
| Maximum clients | Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point |
| 802.11ac | 2x2 single-user/multiuser MIMO with two spatial streams Maximal ratio combining (MRC) 20-, 40- and 80-MHz channels PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic shift diversity (CSD) support |
| Accessories | Mounting bracket: AIR-AP-BRACKET-W2= (available as spare) Spacer kit: AIR-AP1810W-KIT= (sold separately), includes spacer and RJ-45 jumper cable Cradle kit: AIR-OEAP1810-CRD= (sold separately), includes back cover and RJ-45 jumper cable Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports Cisco local power supply: AIR-PWR-D= (sold separately) |
| Powering options | 802.3af/at Ethernet switch Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=) Optional Cisco local power supply (AIR-PWR-C= or AIR-PWR-D=) |
| Dimensions (W x L x H) | Access point (without mounting bracket): 6.5 x 4.5 x 1.6 in. (165 x 114 x 41 mm) |
| Input power requirements | 44 to 57V DC Optional power supply and power injector: 100 to 240V AC; 49 to 60 Hz |
| Power draw | Maximum values: 12.95W (15.4W with 100m of cable) with no PoE out, 20.7W (22W with 100m of cable) with 6.49W PoE out and 27.65W with 12.95W PoE out (when powered using AIR-PWR-C or AIR-PWR-D) Note: When deployed using PoE, the power draw numbers listed above include the power loss in 100m of cabling on the uplink port and 100m of cabling on the PoE out port. |
| Ethernet ports | Authentication with 802.1X or MAC filtered Dynamic VLAN or per port Traffic locally switched or tunneled back to wireless LAN controller |
| Software | Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.2.111.0 or later |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors Per-port status for local Ethernet ports For privacy, LEDs are automatically turned off when the access point joins a controller. LEDs may be enabled to be administratively - see configuration guide. |
| Mounting | Included with the access point: mounting bracket AIR-AP-BRACKET-W2, compatible to install to single gang junction box or multiple international standards Optional: AIR-AP1810W-KIT=, spacer kit to mount the access point directly on a wall where standard junction boxes are not available AIR-OEAP1810-CRD=, cradle kit to mount the access point on a desk |
| Environmental | Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) maximum altitude: 25°C, 15,000 ft (4,500m) Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% percent (noncondensing) Operating maximum altitude: 40°C, 9843 ft (3,000m) |
| Interfaces | One 10/100/1000BASE-T PoE uplink port Management console port (RJ-45) Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port: PoE out provides 802.3af when access point is powered by Cisco local power supply (AIR-PWR-C=, AIR-PWR-D=), or ~6.5W when powered by 802.3at, or no output when powered by 802.3af One passive pass-through port RJ-45 (back to bottom) DC power connector |
| Weight | Access point without mounting bracket or any other accessories: 1.2 lb (560 g) |
Теги: AIR-OEAP1810-R-K9