+7 (812) 309 34 73. Договоримся!
N2K-C2348TQ-E is a Cisco Nexus 2300 Platform Chassis, offering 10G BASE T Fabric Extender, 2 power supplier, 3 Fan Modules, 48x100M/1/10GT (RJ45) + 6x40G QSFP+(req QSFP+) and choice of airflow.
Quick Specs
Figure 1 shows the appearance of the N2K-C2348TQ-E.
Table 1 shows the Quick Spec.
|
Product Code |
N2K-C2348TQ-E |
|
Fabric extender host interfaces |
48 |
|
Fabric extender host interface type |
48 x 100M/1/10GBASE-T ports: RJ-45 connectors |
|
Fabric extender fabric interfaces |
6 x 40 Gigabit Ethernet QSFP (24 x 10 Gigabit Ethernet) |
|
Fabric speed |
Up to 240 Gbps in each direction (480-Gbps full duplex) |
|
Performance |
Hardware forwarding at 1440 Gbps or 2160 mpps |
|
FCoE |
FCoE support up to 30m with Category 6a and 7 cables (Cisco Nexus 5500 and 5600 platforms and 6000 Series) |
|
Cisco parent switch |
Cisco Nexus 5500 and 5600 platforms Cisco Nexus 6000 Series |
|
Dimensions (H x W x D) |
4.37 x 43.94 x 43.36 cm |
|
Net Weight |
8.0 kg |
Product Details
Figure 2 shows the front panel of the N2K-C2348TQ-E.
Note:
|
① |
ID LED |
③ |
40-Gigabit ports (six) for QSFP+ transceivers and 40-Gigabit QSFP+ to four 10-Gigabit SFP+ breakout cables |
|
② |
Status LED |
④ |
48 x 100M/1/10GBASE-T ports |
Figure 3 shows the back panel of the N2K-C2348TQ-E.
Note:
|
① |
Power supply modules (one or two, hot swappable) (AC power supply shown) |
|
② |
Fan modules (three, hot swappable) |
|
③ |
ID LED |
|
④ |
Management/Console HDMI port |
|
⑤ |
Status LED |
The Accessories
Table 2 shows some recommended accessories.
|
Models |
Description |
|
SFP-10G-SR |
10GBASE-SR SFP Module |
|
SFP-H10GB-CU1M |
Cisco Direct-Attach Twinax Copper Cable Assembly with SFP+ Connectors SFP-H10GB-CU1M |
|
SFP-H10GB-CU5M |
SFP-H10GB-CU5M,5M Passive Copper Twinax Cable F, Nexus,24AWG cable assembly |
|
QSFP-H40G-CU5M |
Cisco QSFP to QSFP copper direct-attach 40GBASE-CR4 cable QSFP-H40G-CU5M |
|
QSFP-40G-LR4 |
40GBase-LR4 Optical Transceiver,QSFP+,40GE,Single-mode Module(1310nm,10km,LC) |
Compare to Similar Items
Table 3 shows the comparison of similar items.
|
Product Code |
N2K-C2348TQ-E |
N2K-C2348UPQ |
|
Fabric extender host interfaces |
48 |
48 |
|
Fabric extender host interface type |
48 x 100M/1/10GBASE-T ports: RJ-45 connectors |
For 48 x 1/10 Gigabit Ethernet host interface ports: 1/10 Gigabit Ethernet ports SFP/SFP+ |
|
Fabric extender fabric interfaces |
6 x 40 Gigabit Ethernet QSFP (24 x 10 Gigabit Ethernet) |
6 x 40 Gigabit Ethernet QSFP (24 x 10 Gigabit Ethernet) |
|
Fabric speed |
Up to 240 Gbps in each direction (480-Gbps full duplex) |
Up to 240 Gbps in each direction (480-Gbps full duplex) |
|
Performance |
Hardware forwarding at 1440 Gbps or 2160 mpps |
Hardware forwarding at 1440 Gbps or 2160 mpps |
|
Cisco parent switch |
Cisco Nexus 5500 and 5600 platforms Cisco Nexus 6000 Series |
Cisco Nexus 5500 and 5600 platforms |
Get more information
Do you have any question about the N2K-C2348TQ-E?
Contact us now via Live Chat or info@itg-spb.ru.
N2K-C2348TQ-E Specification |
|
|
Type |
Cisco Nexus 2348TQ-E |
|
Fabric extender host interfaces |
48 |
|
Fabric extender host interface type |
48 100M/1/10GBASE-T ports: RJ-45 connectors |
|
Fabric extender fabric interfaces |
6 x 40 Gigabit Ethernet QSFP (24 x 10 Gigabit Ethernet) |
|
Fabric extender fabric interface type |
Fiber: QSFP-40G-SR-BD, QSFP-40G-SR4,QSFP-40G-SR4-S, QSFP-40G-LR4, QSFP-40G-LR4-S, and QSFP-40G-CSR4-S
Copper: 40 Gigabit Ethernet QSFP+ active Twinax cables (QSFP-H40G-ACU7M and QSFP-H40G-ACU10M (no passive cables)
AOC cables: QSFP-H40G-AOC1M, QSFP-H40G-AOC2M, QSFP-H40G-AOC3M, QSFP-H40G-AOC5M, QSFP-H40G-AOC7M, QSFP-H40G-AOC10M, and QSFP-H40G-AOC15M
AOC breakout cables: QSFP-4X10G-AOC1M, QSFP-4X10G-AOC2M, QSFP-4X10G-AOC3M, QSFP-4X10G-AOC5M, QSFP-4X10G-AOC7M, and QSFP-4X10G-AOC10M
Copper breakout cables: QSFP-4x10G-AC7M and QSFP-4x10G-AC10M (no passive cables) Distance between Cisco Nexus 2300 fabric extender and Cisco Nexus 5500 switch is up to 10 km (up to 3 km for FCoE traffic), and for the Cisco Nexus 5600 switch or 6000 Series Switch the distance is up to 3 km (300m for FCoE traffic)
All equivalent S-class optics are supported Cisco 40GBASE QSFP to SFP+/SFP adapter (CVR-QSFP-SFP10G) |
|
Fabric speed |
Up to 240 Gbps in each direction |
|
Oversubscription |
Up to 2:1 |
|
Performance |
Hardware forwarding at 1440 Gbps or 2160 mpps |
|
FCoE |
FCoE support up to 30m with Category 6a and 7 cables (Cisco Nexus 5500 and 5600 platforms and 6000 Series) |
|
Cisco parent switch |
Cisco Nexus 5500 and 5600 platforms Cisco Nexus 6000 Series |
|
Minimum software |
Cisco NX-OS Release 7.3(0)N1(1) (Cisco Nexus 5500 and 5600 platforms and 6000 Series) |
|
Dimensions (H x W x D) |
1.72 x 17.3 x 17.07 in. (4.37 x 43.94 x 43.36 cm) |
|
Weight |
17.7 lbs. (8.0 kg) |
|
Environment |
Operating temperature: 32 to 131°F (0 to 55°C) Non-operating temperature: -40 to 158°F (-40 to 70°C) Humidity: 5 to 95 percent (noncondensing) Altitude: 0 to 10,000 ft. (0 to 3000m) |
|
Power supply |
N2200-PAC-400W, N2200-PAC-400W-B, N2200-PDC-400W, and N2200-PDC-350W-B |
|
Fan modules |
NXA-FAN-30CFM-F and NXA-FAN-30CFM-B (N+1 redundancy = 3 fans) |
|
Typical input operating power |
280W at 30m (maximum 350W) |
|
Heat dissipation |
952 BTU/hour (typical); 1190 BTU/hour (maximum) |
|
Regulatory Compliance |
Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC |
|
Safety |
|
|
EMC: Emissions |
|
|
EMC: Immunity |
|
|
RoHS |
The Cisco Nexus 2348UPQ, 2348TQ, and 2332TQ are RoHS-6 compliant |
|
Network Equipment Building Standards (NEBS) |
The Cisco Nexus 2348UPQ, 2348TQ, and 2332TQ meet NEBS level-3 standards (hardware revision 3) (not currently supported) |
|
Description |
Specification |
|
Layer 2 features |
|
|
Enhanced Ethernet |
|
|
Quality of service (QoS) |
|
|
High availability |
|
|
Security |
|
|
Management |
|
|
Configuration MIBs |
|
|
Monitoring MIBs |
|
|
Industry standards |
|
| Характеристики | |
| Cisco parent switch | Cisco Nexus 5500 and 5600 platformsCisco Nexus 6000 Series |
| Configuration MIBs | ENTITY-MIBIF-MIBFABRIC-EXTENDER MIBCISCO-ENTITY-EXT-MIBCISCO-ENTITY-FRU-CONTROL-MIBCISCO-ENTITY-SENSOR-MIBCISCO-ETHERNET-FABRIC-EXTENDER-MIB |
| Description | Specification |
| Dimensions (H x W x D) | 1.72 x 17.3 x 17.07 in. (4.37 x 43.94 x 43.36 cm) |
| EMC: Emissions | 47CFR Part 15 (CFR 47) Class AAS/NZS CISPR22 Class ACISPR22 Class AEN55022 Class AICES003 Class AVCCI Class AEN61000-3-2EN61000-3-3KN22 Class ACNS13438 Class A |
| EMC: Immunity | EN50082-1EN61000-6-1EN55024CISPR24EN300386KN 61000-4 series |
| Enhanced Ethernet | DCB |
| Environment | Operating temperature: 32 to 131°F (0 to 55°C)Non-operating temperature: -40 to 158°F (-40 to 70°C)Humidity: 5 to 95 percent (noncondensing)Altitude: 0 to 10,000 ft. (0 to 3000m) |
| Fabric extender fabric interface type | Fiber: QSFP-40G-SR-BD, QSFP-40G-SR4,QSFP-40G-SR4-S, QSFP-40G-LR4, QSFP-40G-LR4-S, and QSFP-40G-CSR4-S Copper: 40 Gigabit Ethernet QSFP+ active Twinax cables (QSFP-H40G-ACU7M and QSFP-H40G-ACU10M (no passive cables) AOC cables: QSFP-H40G-AOC1M, QSFP-H40G-AOC2M, QSFP-H40G-AOC3M, QSFP-H40G-AOC5M, QSFP-H40G-AOC7M, QSFP-H40G-AOC10M, and QSFP-H40G-AOC15M AOC breakout cables: QSFP-4X10G-AOC1M, QSFP-4X10G-AOC2M, QSFP-4X10G-AOC3M, QSFP-4X10G-AOC5M, QSFP-4X10G-AOC7M, and QSFP-4X10G-AOC10M Copper breakout cables: QSFP-4x10G-AC7M and QSFP-4x10G-AC10M (no passive cables)Distance between Cisco Nexus 2300 fabric extender and Cisco Nexus 5500 switch is up to 10 km (up to 3 km for FCoE traffic), and for the Cisco Nexus 5600 switch or 6000 Series Switch the distance is up to 3 km (300m for FCoE traffic) All equivalent S-class optics are supportedCisco 40GBASE QSFP to SFP+/SFP adapter (CVR-QSFP-SFP10G) |
| Fabric extender fabric interfaces | 6 x 40 Gigabit Ethernet QSFP (24 x 10 Gigabit Ethernet) |
| Fabric extender host interface type | 48 100M/1/10GBASE-T ports: RJ-45 connectors |
| Fabric extender host interfaces | 48 |
| Fabric speed | Up to 240 Gbps in each direction (480-Gbps full duplex) |
| Fan modules | NXA-FAN-30CFM-F and NXA-FAN-30CFM-B (N+1 redundancy = 3 fans) |
| FCoE | FCoE support up to 30m with Category 6a and 7 cables (Cisco Nexus 5500 and 5600 platforms and 6000 Series) |
| Heat dissipation | 952 BTU/hour (typical); 1190 BTU/hour (maximum) |
| High Availability | Hot-swappable field-replaceable power supplies and fan modules1:1 power redundancyUplink traffic management through Cisco EtherChannel hashing or static port pinningvPCs for dual-homed active-active connectivity across two Cisco Nexus parent switchesvPCs for dual-homed straight-through NIC connectivity across two Cisco Nexus 2300 platform fabric extendersIn-Service Software Upgrade (ISSU) |
| Industry standards | IEEE 802.1p: CoS prioritizationIEEE 802.1Q: VLAN taggingIEEE 802.3: EthernetIEEE 802.3ae: 10 Gigabit EthernetSFF 8431 SFP+ supportIEEE 802.3u 100BASE-TX specificationIEEE 802.3ab 1000BASE-T specificationIEEE 802.3an 10GBASE-T10GBASE-SR10GBASE-LRRMONSFF-8461 |
| Layer 2 features | Layer 2 VLAN trunksIEEE 802.1Q VLAN encapsulationCisco EtherChannel technology on uplinksPortChannel on server ports on Cisco Nexus 2300 platformsAdvanced PortChannel hashingJumbo frames on all ports (up to 9216 bytes)Pause frames (Priority Flow Control [PFC] and IEEE 802.3x)Private VLANs (promiscuous only on uplinks)Local multicast replication on Cisco Nexus 2300 platform (8000 entries)Autonegotiation to 1000BASE-T; full duplex on host interfaces |
| Management | Fabric extender management using in-band managementLocator and beacon LEDs on front and back of chassis (locator beacons on the front and rear of the chassis help reduce errors when the equipment is serviced)Per-port locator and beacon LEDsSyslogSimple Network Management Protocol Versions 1, 2, and 3 (SNMP v1, v2, and v3)Enhanced SNMP MIB supportXML (NETCONF) supportRemote Monitoring (RMON)Cisco Discovery Protocol Versions 1 and 2Cisco Switched Port Analyzer (SPAN) source on server portsPower-on self-test (POST)Cisco Generic Online Diagnostics (GOLD): EthernetComprehensive bootup diagnostic testsCiscoWorksCisco Data Center Network Manager (DCNM); the Cisco Nexus 2300 platform is managed through the parent Cisco Nexus switch using DCNM and standard SNMP, XML interface, and command-line interface (CLI) |
| Minimum software | Cisco NX-OS Release 7.3(0)N1(1)(Cisco Nexus 5500 and 5600 platforms and 6000 Series) |
| Monitoring MIBs | RMON-MIB |
| Network Equipment Building Standards (NEBS) | The Cisco Nexus 2348UPQ, 2348TQ, and 2332TQ meet NEBS level-3 standards (hardware revision 3) (not currently supported) |
| Oversubscription | Up to 2:1 |
| Performance | Hardware forwarding at 1440 Gbps or 2160 mpps |
| Power supply | N2200-PAC-400W,N2200-PAC-400W-B,N2200-PDC-400W, andN2200-PDC-350W-B |
| Quality of service (QoS) | Layer 2 IEEE 802.1p (class of service [CoS])Eight hardware queues per port (Cisco Nexus 2300 platforms)Per-port QoS configurationLocal policing on Cisco Nexus 2300 platform (64 policers)CoS trustConfigurable tail-drop threshold on Cisco Nexus 2300 platformEgress strict-priority queuingEgress port-based scheduling: Weighted Round Robin (WRR) |
| Regulatory Compliance | Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC |
| RoHS | The Cisco Nexus 2348UPQ, 2348TQ, and 2332TQ are RoHS-6 compliant |
| Safety | UL 60950-1CAN/CSA-C22.2 No. 60950-1EN 60950-1IEC 60950-1AS/NZS 60950-1GB4943 |
| Security | Local classification (256 access control list [ACL] entries) |
| Type | Cisco Nexus 2348TQ-E |
| Typical input operating power | 280W at 30m (maximum 350W) |
| Weight | 17.7 lbs. (8.0 kg) |
Теги: N2K-C2348TQ-E Cisco