+7 (812) 309 34 73. Договоримся!
Общая информация (WS-C2960XR-48FPS-I)
Cisco Catalyst 2960-XR series switches offer power resiliency with optional dual field-replaceable power supplies and IP Lite Cisco IOS software with dynamic routing and Layer 3 features. WS-C2960XR-48FPS-I is one of 2960-XR switches, IP Lite switch, supporting forty-eight 10/100/1000 Ethernet ports with POE+ and 4 x 1G SFP uplink interfaces. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.
Быстрые спецификацииs
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
WS-C2960XR-48FPS-I |
|
Enclosure Type |
Rack-mountable - 1U |
|
Feature Set |
IP Lite |
|
Uplink Interfaces |
4 x 1G SFP |
|
Ports |
48 x 10/100/1000 (POE+) |
|
Available PoE Power |
740W |
|
Forwarding Bandwidth |
108Gbps |
|
Maximum stacking number |
8 |
|
Stack bandwidth |
80G |
|
Switching Bandwidth |
216Gbps |
|
RAM |
512 MB |
|
Flash Memory |
128 MB |
|
Dimensions |
44.5 cm x 40.8 cm x 4.45 cm |
|
Package Weight |
17.49 Kg |
Детали продукта
На рисунке 1 показана передняя панель WS-C2960XR-48FPS-I.
Note:
·There are Forty-eight 10/100/1000 Ethernet Gigabit Ports and four 1G SFP uplink Ports on the front panel.
·Two USB Type A ports and one USB mini-Type B (console) port are on the left.
·This switch offers one RJ-45 console port and one Ethernet management port on the left of the front panel.
·Power over Ethernet Plus(PoE+) supports up to 740W of PoE budget for 24 ports with 30W per port48 ports with 15.4W per port.
На рисунке 2 показана задняя панель WS-C2960XR-48FPS-I.
Note:
|
? |
FlexStack-Plus module slot and cover |
? |
PS OK LED |
|
? |
Power supply slot (with blank module) |
? |
AC power connector on the power supply module |
|
? |
AC OK LED |
The WS-C2960XR-48FPS-I supports stacking with the optional stack kit. It has the FlexStack-Plus module (hot-swappable) that inserts in the slot located in the switch rear panel, and a 0.5-meter FlexStack cable to connect the FlexStack-Plus module ports. The stack module should purchase separately.
Аксессуары
Table 2 shows some accessories of WS-C2960XR-48FPS-I.
|
Models |
Description |
|
C2960X-STACK |
Catalyst 2960-X FlexStack Plus Stacking Module |
|
CAB-STK-E-0.5M |
Cisco FlexStack Stacking Cables |
|
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-SX-MMD |
1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
|
CAB-CONSOLE-RJ45 |
Console Cable 6ft with RJ45 and DB9F |
|
CAB-CONSOLE-USB |
Console Cable 6 ft with USB Type A and mini-B |
Сравнить похожие товары
Table 3 shows the comparison of similar items.
|
Models |
WS-C2960XR-48LPS-I |
WS-C2960XR-48FPS-I |
|
Ports |
48 x 10/100/1000 (POE+) |
48 x 10/100/1000 (POE+) |
|
Available PoE Power |
370W |
740W |
|
Uplinks |
4 x 1G SFP |
4 x 1G SFP |
|
Feature Set |
IP Lite |
IP Lite |
|
FlexStack-Plus Stacking |
Optional |
Optional |
Что бы получить больше информации
У вас есть какие-либо вопросы о Cisco Catalyst 2960XR-48FPS-I switch?
Свяжитесь с нами через ЧАТ или e-mail: info@itg-spb.ru.
| Specification | |
| Forwarding bandwidth(Gbps) | 108Gbps |
| Switching bandwidth | 216Gbps |
| Maximum active VLANs | 1023 |
| Stacking cable | CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length |
| Power Consumption Operational | 0.89kVA |
| license | ENERGY-MGMT, ENERGY-MGT-100-K9 |
| features | IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub) Advanced IP unicast routing protocols (OSPF for Routed Access) EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite. Equal-cost routing Policy-based routing (PBR) Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) Protocol Independent Multicast (PIM) |
| System software | IOS IP Lite |
| Network security | MAC-based VLAN assignment enables Cisco TrustSec uses Comprehensive 802.1X IPv6 First-Hop Security Device Sensor and Device Classifier Cisco Trust Anchor Technology Cisco Threat Defense Private VLANs Unicast Reverse Path Forwarding (uRPF) Multidomain Authentication Access Control Lists (ACLs) Switched Port Analyzer (SPAN) Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) TACACS+ and RADIUS authentication MAC Address Notification Multilevel security on console access BPDU Guard Spanning Tree Root Guard (STRG) IGMP filtering |
| Short-term exception at sea level* | 23 F to 131 F (-5 C to 55 C) |
| Package Weight | 38.56 Pounds (17.49Kg) |
| Short-term exception up to 5000 feet (1500 m)* | 23 F to 122 F (-5 C to 50 C) |
| Short-term exception up to 10,000 feet (3000 m)* | 23 F to 113 F (-5 C to 45 C) |
| Technical Support and Services | Cisco SMARTnet Service Cisco Smart Foundation Service Cisco Smart Care Service Cisco SP Base Service Cisco Focused Technical Support Services |
| Short-term exception up to 13,000 feet (4000 m)* | 23 to 104 F (-5 C to 40 C) |
| Operating temperature up to 5000 ft (1500 m) | 23 F to 113 (-5 C to 45 C) |
| Storage temperature up to 15,000 feet (4573 m) | -13 to 158 F (-25 to 70 C) |
| Operating temperature up to 10,000 ft (3000 m) | 23 F to 104 F (-5 C to 40 C) |
| Operating altitude | Up to 10,000 (Up to 3000 Meters) |
| Storage altitude | Up to 13,000 (Up to 4000 Meters) |
| Operating relative humidity | 10% to 95% noncondensing |
| Storage relative humidity | 10% to 95% noncondensing |
| Enclosure type | Rack-mountable - 1U |
| Ports | 48 x 10/100/1000 (POE+) + 4 x 1G SFP |
| MAC Address Table Size | 16K (default) |
| Compliant Standards | IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.1s IEEE 802.1w IEEE 802.1X IEEE 802.1ab (LLDP) IEEE 802.3ad IEEE 802.3af and IEEE 802.3at IEEE 802.3ah (100BASE-X single/multimode fiber only) IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X RMON I and II standards SNMP v1, v2c, and v3 IEEE 802.3az IEEE 802.3ae 10Gigabit Ethernet IEEE 802.1ax |
| Network management Interface | 10/100 Mbps Ethernet (RJ-45) |
| Power supply | PWR-C2-250WAC |
| Expansion Slot(s) | 1 FlexStack-Plus slot and 1 power redundant slot |
| CPU | APM86392 600MHz dual core |
| Width | 17.5 Inches (44.5 cm) |
| Available PoE Power | 740W |
| Power Device | Power supply - redundant - plug-in module |
| RAM | 512 MB |
| Depth | 16 Inches (40.8 cm) |
| Weight | 14.7 Pounds (6.7Kg) |
| Rack Mounting Kit | Optional |
| Power Redundancy | optional |
| Voltage range (Auto) | 110V-240V |
| Maximum stacking number | 8 |
| Flash Memory | 128 MB |
| Forwarding Performance | 107.1Mpps |
| Console ports | USB (Type-B), Ethernet (RJ-45) |
| Stack Bandwidth | 80G |
| MTBF in hours | 230,860 |
| Height | 1.75 Inches (4.45 cm) |
| Status Indicators | Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, PoE, Stack link status, link duplex, and link speed |
| Stack Modules | C2960X-STACK |
| Management & Troubleshooting | Auto-MDOX TDR UDLD IP SLA Responder layer 2 / IP Traceroute SPAN RSPAN Express Setup Device Manager Cisco Network Assistant Smartports + Advisor Troubleshooting Advisor Drag-and-drop Cisco IOS Upgrade IP Address DHCP Autoinstall with saved configuration Configuration Replace DHCP Auto Image Upgrade DHCP Port Based Allocation Error Disable MIB |
Теги: WS-C2960XR-48FPS-I