+7 (812) 309 34 73. Договоримся!
Общая информация (WS-C2960XR-24PD-I)
Cisco catalyst 2960XR-24PD-I IP Lite Base layer 2 - 3 stackable switch is comprised of 24 x 10/100/1000 Ethernet POE+ ports and two SFP+ uplink interfaces. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM, etc.
Быстрые спецификацииs
Таблица 1 показывает Быстрые спецификацииs.
|
Product Code |
WS-C2960XR-24PD-I |
|
Enclosure Type |
Rack-mountable - 1U |
|
Feature Set |
IP Lite |
|
Uplink Interfaces |
2 x 10G SFP+ |
|
Ports |
24 x 10/100/1000 POE+ |
|
Available PoE Power |
370W |
|
Forwarding Bandwidth |
108Gbps |
|
Maximum stacking number |
8 |
|
Stack bandwidth |
80G |
|
Switching Bandwidth |
216Gbps |
|
RAM |
512 MB |
|
Flash Memory |
128 MB |
|
Dimensions (H x D x W) |
4.45 x 40.8 x 44.5 cm |
|
Package Weight |
16.15 Kg |
Детали продукта
На рисунке 1 показана передняя панель WS-C2960XR-24PD-I.
Note:
·There are twenty-four 10/100/1000 Ethernet Gigabit Ports and two 10G SFP+ uplinks on the front panel.
·Two USB Type A ports and one USB mini-Type B (console) port are on the left.
·This switch offers one RJ-45 console port and one Ethernet management port on the left of the front panel.
·Power over Ethernet Plus (PoE+) supports up to 370W for 12 ports with 30W per port24 ports with 15.4W per port.
На рисунке 2 показана задняя панель WS-C2960XR-24PD-I.
Note:
|
? |
FlexStack-Plus module slot and cover |
? |
PS OK LED |
|
? |
Power supply slot (with blank module) |
? |
AC power connector on the power supply module |
|
? |
AC OK LED |
The WS-C2960XR-24PD-I supports stacking with the optional stack kit. It has the FlexStack-Plus module (hot-swappable) that inserts in the slot located in the switch rear panel, and a 0.5-meter FlexStack cable to connect the FlexStack-Plus module ports. The stack module should purchase separately.
Аксессуары
Table 2 shows some accessories of WS-C2960XR-24PD-I.
|
Models |
Description |
|
C2960X-STACK |
Catalyst 2960-X FlexStack Plus Stacking Module |
|
CAB-STK-E-0.5M |
Cisco FlexStack Stacking Cables |
|
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-SX-MMD |
1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
|
CAB-CONSOLE-RJ45 |
Console Cable 6ft with RJ45 and DB9F |
|
CAB-CONSOLE-USB |
Console Cable 6 ft with USB Type A and mini-B |
Сравнить похожие товары
Table 3 shows the comparison of similar items.
|
Models |
WS-C2960XR-24PD-I |
WS-C2960XR-24TD-I |
|
Ports |
24 x 10/100/1000 Ethernet Ports |
24 x 10/100/1000 Ethernet Ports |
|
Uplinks |
2 x 10G SFP+ |
2 x 10G SFP+ |
|
Feature Set |
IP Lite |
IP Lite |
|
FlexStack-Plus Stacking |
Optional |
Optional |
|
Available PoE Power |
370W |
Not Supported |
Что бы получить больше информации
У вас есть какие-либо вопросы о Cisco Catalyst 2960XR-24PD-I switch?
Свяжитесь с нами через ЧАТ или e-mail: or info@itg-spb.ru.
| Specification | |
| Forwarding bandwidth(Gbps) | 108Gbps |
| Switching bandwidth | 216Gbps |
| Maximum active VLANs | 1023 |
| Stacking cable | CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length<BR>CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length<BR>CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length |
| Power Consumption Operational | 0.46kVA |
| license | ENERGY-MGMT, ENERGY-MGT-100-K9 |
| features | IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub)<BR>Advanced IP unicast routing protocols (OSPF for Routed Access)<BR>EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite.<BR>Equal-cost routing<BR>Policy-based routing (PBR)<BR>Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)<BR>Protocol Independent Multicast (PIM) |
| System software | IOS IP Lite |
| Network security | MAC-based VLAN assignment enables Cisco TrustSec uses<BR>Comprehensive 802.1X IPv6 First-Hop Security<BR>Device Sensor and Device Classifier Cisco Trust Anchor Technology<BR>Cisco Threat Defense Private VLANs<BR>Unicast Reverse Path Forwarding (uRPF) Multidomain Authentication<BR>Access Control Lists (ACLs) Switched Port Analyzer (SPAN)<BR>Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3)<BR>TACACS+ and RADIUS authentication MAC Address Notification<BR>Multilevel security on console access BPDU Guard<BR>Spanning Tree Root Guard (STRG) IGMP filtering |
| Short-term exception at sea level* | 23 F to 131 F (-5 C to 55 C) |
| Package Weight | 35.6 Pounds (16.15 Kg) |
| Short-term exception up to 5000 feet (1500 m)* | 23 F to 122 F (-5 C to 50 C) |
| Short-term exception up to 10,000 feet (3000 m)* | 23 F to 113 F (-5 C to 45 C) |
| Technical Support and Services | Cisco SMARTnet Service Cisco Smart Foundation Service Cisco Smart Care Service<BR>Cisco SP Base Service Cisco Focused Technical Support Services |
| Short-term exception up to 13,000 feet (4000 m)* | 23 to 104 F (-5 C to 40 C) |
| Operating temperature up to 5000 ft (1500 m) | 23 F to 113 (-5 C to 45 C) |
| Storage temperature up to 15,000 feet (4573 m) | -13 to 158 F (-25 to 70 C) |
| Operating temperature up to 10,000 ft (3000 m) | 23 F to 104 F (-5 C to 40 C) |
| Operating altitude | Up to 10,000 (Up to 3000 Meters) |
| Storage altitude | Up to 13,000 (Up to 4000 Meters) |
| Operating relative humidity | 10% to 95% noncondensing |
| Storage relative humidity | 10% to 95% noncondensing |
| Enclosure type | Rack-mountable - 1U |
| Ports | 24 x 10/100/1000 (POE+) + 2 x 10 Gigabit SFP+ |
| MAC Address Table Size | 16K (default) |
| Compliant Standards | IEEE 802.1D Spanning Tree Protocol<BR>IEEE 802.1p CoS Prioritization<BR>IEEE 802.1Q VLAN<BR>IEEE 802.1s<BR>IEEE 802.1w<BR>IEEE 802.1X<BR>IEEE 802.1ab (LLDP)<BR>IEEE 802.3ad<BR>IEEE 802.3af and IEEE 802.3at<BR>IEEE 802.3ah (100BASE-X single/multimode fiber only)<BR>IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports<BR>IEEE 802.3 10BASE-T<BR>IEEE 802.3u 100BASE-TX<BR>IEEE 802.3ab 1000BASE-T<BR>IEEE 802.3z 1000BASE-X<BR>RMON I and II standards<BR>SNMP v1, v2c, and v3<BR>IEEE 802.3az<BR>IEEE 802.3ae 10Gigabit Ethernet<BR>IEEE 802.1ax |
| Network management Interface | 10/100 Mbps Ethernet (RJ-45) |
| Power supply | PWR-C2-250WAC |
| Expansion Slot(s) | 1 FlexStack-Plus slot and 1 power redundant slot |
| CPU | APM86392 600MHz dual core |
| Width | 17.5 Inches (44.5 cm) |
| Available PoE Power | 370W |
| Power Device | Power supply - redundant - plug-in module |
| RAM | 512 MB |
| Depth | 16 Inches (40.8 cm) |
| Weight | 13.6 Pounds (6.2Kgs) |
| Rack Mounting Kit | Optional |
| Power Redundancy | optional |
| Voltage range (Auto) | 110V-240V |
| Maximum stacking number | 8 |
| Flash Memory | 128 MB |
| Forwarding Performance | 95.2Mpps |
| Console ports | USB (Type-B), Ethernet (RJ-45) |
| Stack Bandwidth | 80G |
| MTBF in hours | 322,740 |
| Height | 1.75 Inches (4.45 cm) |
| Status Indicators | Per-port status: Link integrity, disabled, activity, speed, and full duplex<BR>System status: System, PoE, RPS, Stack link status, link duplex, and link speed |
| Stack Modules | C2960X-STACK |
| Management & Troubleshooting | Auto-MDOX TDR UDLD IP SLA Responder<BR>layer 2 / IP Traceroute SPAN RSPAN<BR>Express Setup Device Manager Cisco Network Assistant<BR>Smartports + Advisor Troubleshooting Advisor Drag-and-drop Cisco IOS Upgrade<BR>IP Address DHCP Autoinstall with saved configuration Configuration Replace<BR>DHCP Auto Image Upgrade DHCP Port Based Allocation Error Disable MIB |
Теги: WS-C2960XR-24PD-I