По запросу
В наличии
Нашли дешевле?
+7 (812) 309 34 73. Договоримся!
Общая информация (SG200-8)
| Specification | |
| Model | Power Dedicated to PoE Number of Ports That Support PoE |
| Storage temperature | -4° to 158°F (-20° to 70°C) |
| Operating temperature | 32° to 104°F (0° to 40°C) |
| Power consumption | Model Power Savings Mode |
| Feature | Description |
| Switching capacity and | Model Capacity in Millions of Packets per Second (mpps) (64-byte packets) |
| forwarding rate | SG200-08 (SLM2008T-CN) 11.9 |
| DoS prevention | DoS attack prevention |
| Priority levels | 4 hardware queues |
| Scheduling | Strict priority and weighted round-robin (WRR) |
| Class of service | Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ) |
| Rate limiting | Ingress policer, per VLAN and per port |
| IPv6 | IPv6 host mode |
| IPv6 QoS | Prioritize IPv6 packets in hardware |
| Simple Network Management Protocol (SNMP) | SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 user-based security model (USM) |
| Multicast Listener Discovery (MLD) snooping | Deliver IPv6 multicast packets only to the required receivers |
| Standard MIBs | draft-ietf-bridge-8021x-MIB rfc2011-MIB |
| draft-ietf-bridge-rstpmib-04-MIB | draft-ietf-entmib-sensor-MIB |
| IPv6 applications | Web, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), RADIUS, syslog, DNS client |
| draft-ietf-hubmib-etherif-MIB-v3-00-MIB | lldp-MIB |
| Standards | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1350, RFC 1533, RFC 1541, RFC 1542, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 2618 |
| IPv6 RFCs supported | RFC 2463: ICMP version 6 |
| draft-ietf-syslog-device-MIB | lldpextdot1-MIB |
| Web user interface | Built-in switch configuration utility for easy browser-based device configuration (HTTP). Supports configuration, system dashboard, system maintenance, and monitoring |
| ianaaddrfamnumbers-MIB | lldpextdot3-MIB |
| ianaifty-MIB | lldpextmed-MIB |
| Remote Monitoring (RMON) | Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis |
| IPv4 and IPv6 dual stack | Coexistence of both protocol stacks to ease migration |
| ianaprot-MIB | p-bridge-MIB |
| Firmware upgrade | Web browser upgrade (HTTP) and TFTP |
| inet-address-MIB | q-bridge-MIB |
| Port mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port. A single session is supported. |
| ip-forward-MIB | rfc1389-MIB |
| VLAN mirroring | Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port. A single session is supported. |
| ip-MIB | rfc1493-MIB |
| RFC1155-SMI | rfc1611-MIB |
| RFC1213-MIB | rfc1612-MIB |
| Localization | Localization of GUI and documentation into multiple languages |
| SNMPv2-MIB | rfc1850-MIB |
| Other management | HTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, ping, syslog |
| SNMPv2-SMI | rfc1907-MIB |
| SNMPv2-TM | rfc2571-MIB |
| MAC table | Up to 8000 MAC addresses |
| RMON-MIB.my | rfc2572-MIB |
| Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED ext | LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices, which store the data in an MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones. |
| dcb-raj-DCBX-MIB-1108-MIB | rfc2574-MIB |
| rfc1724-MIB | rfc2576-MIB |
| IEEE 802.3af PoE delivered on half of the RJ-45 ports within the | Maximum power of 15.4W to any 10/100 or Gigabit Ethernet base port supporting PoE. The total power available for PoE per switch is as follows: |
| RFC-1212.my_for_MG-Soft | rfc2613-MIB |
| rfc1213-MIB | rfc2665-MIB |
| rfc1757-MIB | rfc2668-MIB |
| RFC-1215.my | rfc2737-MIB |
| SNMPv2-CONF.my | rfc2925-MIB |
| SNMPv2-TC.my | rfc3621-MIB |
| rfc2674-MIB | rfc4668-MIB |
| rfc2575-MIB | rfc4670-MIB |
| rfc2573-MIB | trunk-MIB |
| Buttons | Reset button |
| rfc2233-MIB | tunnel-MIB |
| Cabling type | Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T |
| rfc2013-MIB | udp-MIB |
| LEDs | System, Link/Act, PoE, Speed |
| Private MIBs | CISCOSB-lldp-MIB CISCOSB-ip-MIB |
| Ports | Model Name Total System Ports |
| Flash | 16 MB (8 MB in SG200-08 and SG200-08P) |
| CISCOSB-brgmulticast-MIB | CISCOSB-iprouter-MIB |
| CPU memory | 128 MB (32 MB in SG200-08 and SG200-08P) |
| CISCOSB-bridgemibobjects-MIB | CISCOSB-ipv6-MIB |
| Unit weight | Model Kilograms |
| CISCOSB-bonjour-MIB | CISCOSB-mnginf-MIB |
| CISCOSB-MIB | CISCOSB-localization-MIB |
| Dimensions (W x H x D) | Model Metric (mm) |
| Power | Model Power |
| CISCOSB-dhcpcl-MIB | CISCOSB-lcli-MIB |
| CISCOSB-wrandomtaildrop-MIB | CISCOSB-mcmngr-MIB |
| CISCOSB-traceroute-MIB | CISCOSB-mng-MIB |
| CISCOSB-telnet-MIB | CISCOSB-physdescription-MIB |
| CISCOSB-stormctrl-MIB | CISCOSB-Poe-MIB |
| CISCOSB-ssh-MIB | CISCOSB-protectedport-MIB |
| CISCOSB-socket-MIB | CISCOSB-rmon-MIB |
| CISCOSB-sntp-MIB | CISCOSB-rs232-MIB |
| CISCOSB-smon-MIB | CISCOSB-SecuritySuite-MIB |
| CISCOSB-phy-MIB | CISCOSB-snmp-MIB |
| CISCOSB-multisessionterminal-MIB | CISCOSB-specialbpdu-MIB |
| CISCOSB-mri-MIB | CISCOSB-banner-MIB |
| CISCOSB-jumboframes-MIB | CISCOSB-syslog-MIB |
| CISCOSB-gvrp-MIB | CISCOSB-TcpSession-MIB |
| CISCOSB-endofmib-MIB | CISCOSB-traps-MIB |
| CISCOSB-dot1x-MIB | CISCOSB-trunk-MIB |
| CISCOSB-deviceparams-MIB | CISCOSB-tuning-MIB |
| CISCOSB-cli-MIB | CISCOSB-tunnel-MIB |
| CISCOSB-cdb-MIB | CISCOSB-udp-MIB |
| CISCOSB-brgmacswitch-MIB | CISCOSB-vlan-MIB |
| CISCOSB-3sw2swtables-MIB | CISCOSB-ipstdacl-MIB |
| CISCOSB-smartPorts-MIB | CISCO-SMI-MIB |
| CISCOSB-tbi-MIB | CISCOSB-DebugCapabilities-MIB |
| CISCOSB-macbaseprio-MIB | CISCOSB-CDP-MIB |
| CISCOSB-policy-MIB | CISCOSB-vlanVoice-MIB |
| CISCOSB-env_mib | CISCOSB-EVENTS-MIB |
| CISCOSB-sensor-MIB | CISCOSB-sysmng-MIB |
| CISCOSB-aaa-MIB | CISCOSB-sct-MIB |
| CISCOSB-application-MIB | CISCO-TC-MIB |
| CISCOSB-bridgesecurity-MIB | CISCO-VTP-MIB |
| CISCOSB-copy-MIB | CISCO-CDP-MIB |
| CISCOSB-CpuCounters-MIB | CISCOSB-eee-MIB |
| CISCOSB-Custom1BonjourService-MIB | CISCOSB-ssl-MIB |
| CISCOSB-dhcp-MIB | CISCOSB-qosclimib-MIB |
| CISCOSB-dlf-MIB | CISCOSB-digitalkeymanage-MIB |
| CISCOSB-dnscl-MIB | CISCOSB-tbp-MIB |
| CISCOSB-embweb-MIB | CISCOSMB-MIB |
| CISCOSB-fft-MIB | CISCOSB-secsd-MIB |
| CISCOSB-file-MIB | CISCOSB-draft-ietf-entmib-sensor-MIB |
| CISCOSB-greeneth-MIB | CISCOSB-draft-ietf-syslog-device-MIB |
| CISCOSB-interfaces-MIB | CISCOSB-rfc2925-MIB |
| Dynamic Host Configuration Protocol (DHCP) (options 66 and 67) | (DHCP) options facilitate tighter control from a central point (DHCP server) to obtain IP address and perform auto-configuration (with configuration file download) |
| Text-editable config files | Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment |
| Smartports | Simplified configuration of QoS and security capabilities |
| Cloud services | Support for FindIT Network Discovery Utility and Cisco OnPlus technology |
| EEE compliant (802.3az) | Supports 802.3az on all copper Gigabit Ethernet ports (SG200-xx models) |
| Energy Detect mode | Automatically turns off power on Gigabit Ethernet RJ-45 port when the switch detects a link down |
| Cable length detection | Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter than 10 m. |
| Cisco Discovery Protocol | The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics via this protocol. |
| Auto Smartports | Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero touch deployments. |
| Bonjour | The switch advertises itself using the Bonjour protocol |
| Jumbo frames | Frame sizes up to 10 KB supported on 10/100 and Gigabit Ethernet interfaces |
| Supported Small Form-Factor Pluggable (SFP) Modules | Product Ordering Number Media |
| MFEFX1 | Multimode fiber 100 Mbps |
| MFELX1 | Single-mode fiber 100 Mbps |
| MFEBX1 | Single-mode fiber 100 Mbps |
| MGBLX1 | Single-mode fiber 1000 Mbps |
| MGBBX1 | Single-mode fiber 1000 Mbps |
| MGBSX1 | Multimode fiber 1000 Mbps |
| SG200-08 | - - |
| MGBLH1 | Single-mode fiber 1000 Mbps |
| Operating humidity | 10% to 90%, relative, noncondensing |
| Storage humidity | 10% to 90%, relative, noncondensing |
| Certification | UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
Теги: SG200-8 Cisco